56 models
With this transport mount, your usb cable will survive even longer trips. The bracket is designed for short and thinner usb cables with different connectors (have a look at the pictures). You need some support structures for the two…
použitý vzor od "@Hank" ,úprava hlavy šroubu, přidán mezikus do cívky, rozdělení nosníku na dvě části s možností vytisknutí na MINI,
the problem needs to be solved my family says to me, so i got to my pc and designed a replacement cable holder for our poolcleaning robot! turned out really great i suggest using petg and about 40% infill with 100% infill anker and it…
When you want to solder two cables together and dont have four arms to both solder and hold the cables. All kind of cables fit into the different slots. A "helping hand" can damage your cables, especially if the cables are hot. This…
I added more cable slots to make room for 7
holds up to 7 cable, screwable
A simple cableholder on your desk. This can be attached with double-sided tape. I printed it with 0.3mm layer height and without brim.
Changes & Printing Notes: Integrated USB-C port for a clean and precise fit. Cover for the USB-C port added, which must be printed separately in TPU . The TPU cover is designed to be pressed firmly into the slot , ensuring a secure hold.…
Desktop Stand for the Focusrite Scarlett Solo 4th Gen
Kabelhalter für das Bed des Mega X zum Schutz vor Kabelbruch am Headbed. Cable holder for the Mega X bed to protect against cable breakage at the headboard. Print in PETG / no Supports
Get rid of messy cables
A simple wall mount for cables. Nothing more, nothing less.
CableDock C System is a compact and modular desk cable holder , designed in Fusion 360 to keep your cables organized, accessible, and always within reach. The main support attaches to desks, shelves, or any flat surface using a C-clamp…
This is a simple part to fix the cable to the x-carriage. U can use the existing screw of the Printer and a cable tie.
Remix of the original desing with two 3 mm holes for mounting it using screws.
An easy expandable cableholder to store your cables
Cable Holder This is a holder for Cables . The 3mf-File was used for this print. I used PLA with a Prusa Mk3s MMU2s and had no problems. Hope this helps you.
I have constructed a holder for the jack connector of the Hyperx Cloudx plug. The holder has a diameter of 8.7mm so that the plug has a tight fit. the holder is screwed with 2x 3.5mm wood screws.
If you ever need to remove the heated bed, you no longer need to cut off the cable ties
Prints as is, might be a thight fit for the usb-cable depending on the type you buy. But mine fits perfect :) This allows you to use a Type C usbcable since Tesla does not provide this cable and clips for mounting it in the original…
at work we assemble our Computers ourselves. because there isn't always room for power cables in the box, a solution had to be found to attach the cable outside of the box. This is my first prototype with spikes that dig into the box.…
With Screwhole (perfect fit for e.g. 3x13TX10) Screwhole reachable with Long-Bits or with small Bitholder Prints fast an reliably on my MK3S+ (PLA 0,3mm Draft with 20% Gyroid-Infill G-Code included)
Hi! I needed a good way to mount some Cables inside a 19" Rackmount. So I came up with this design. The big hole is for the ziptie, the small one for your screw. You can remix this design for your Use. 3D File is available. It would be…
Kabel sollten immer irgendwie geführt werden. Hierfür ein kleines Teil was das CPU Kabel an der Seite festhält. Benötigt wird: 1x Einschmelzgewinde/Short m3 1x m3 6mm bisschen 1mm Moosgummi (optional)
Viele mögen sagen “völlig Sinnfrei” dennoch hat mich das Kabel gestört wie es so unsauber rumhieng. Ihr benötigt: 2x m3/short (4mm) Einschmelzgewinde 2x m3 6mm Schrauben. 1mm dickes Moosgummi, dann verkratzt man das Gehäuse nicht.…
cableholder for under your mouse mat
This is a usefull cableholder for 3 cables. Please give me advice, if it's not working out very well and have fun to print ;-)
Ring-Cableholder This is an holder for cables . The 3mf-File was used for this print. I used PLA with a Prusa Mk3s MMU2s and had no problems. Hope this helps you.
I bought a rackmount poweroutlet to use for my pc setup, i wanted to mount it under my desk. so i made these diffusers for the screws to go through. i printed extra to guide those cables nicely under the desk.
V1.01 Added a Lid to slide onto it. A Cable-Holder for the Deltaprintr. It clips on the aluminium extrusion. I remixed it from the "DeltaPrintr SD Card Adaptor Holder" by Costfu Works good in combination with a strud clamp either…
Remix of the Type 2 Cable Holder from Elektrofix-OL on thingiverse 90° Plug Holder, seperated in two pieces for easier print, glue and screw the two parts together larger Cable Holder
A wallmount for guitarcables with a slot for the audiocable you have to put the audiojack part into the cylinder with the side that has no cutouts pointing at you. I used superglue to secure both parts together
For plug type N, 3 round pins The model in version v3 offers improved fixation. No supports needed. Quick and easy to print.
I was looking for a simple and effective way to quickly store a cable with a USB adapter. Although there are many models available, I was looking for something faster and came up with this idea. The holes are conical to make it easier.…
Print PETG or ASA. Maybe PLA? Mount with two screws with 4mm diameter.
Ender-3 S1 pro Gulf Coast Ribbon Cable Holder. I did not care for theirs so I designed my own. Category: 3D Printer Parts
Basic cable management for your antenna cable around the room. Requires a small nail to hold to wall. Category: Electronics
Cableholder for under your desk. (2mm)
if you have an audi then i have donne your work and made it with an audi logo. go back to the original model for more information.
Kabelhalter für eine Tischplatte mit der dicke von 2cm oder mehr. Ich Empfehle das Neue Modell zu nehmen da beim Alten es Passieren kann das das Kabel rausrutscht. Andere höhen werde ich bald hochladen (1cm,1.5cm,2.5cm).
This thing was made with Tinkercad. Edit it online https://www.tinkercad.com/things/0Vc1E221CLv Category: 3D Printing
Hier mein kleiner aber feiner Kabelhalter für das Gridfinity System, hält bis zu 6 Kabel. Einfach Kabel zusammenfalten (wie meist original verpackt) oder aufrollen und fertig. Größe 3x4 Viel Spaß
Hello, my father asked me to print this cableholder for his newly build solarpannels so that he can insert theses into the aluprofile and can use cablebinder to secure the cables on the underside of the aluprofiles. to use them you just…
Supports two long USB cables with lightning or USB-C connectors, and keeps them from dangling on the floor.
A cableholder that works just fine but you need to put a rubber band over the cables if the are to small
A great way to quickly get cables organized while fitting into the gridfinity system.
Kabelhalter für eine Tischplatte mit der dicke von 2cm oder mehr. Ich Empfehle das Neue Modell zu nehmen da beim Alten es Passieren kann das das Kabel rausrutscht. Andere höhen werde ich bald hochladen (1cm,1.5cm,2.5cm).
For plug type N, 3 round pins The model in version v3 offers improved fixation. No supports needed. Quick and easy to print.
if you have an audi then i have donne your work and made it with an audi logo. go back to the original model for more information.
Supports two long USB cables with lightning or USB-C connectors, and keeps them from dangling on the floor.
CableDock C System is a compact and modular desk cable holder , designed in Fusion 360 to keep your cables organized, accessible, and always within reach. The main support attaches to desks, shelves, or any flat surface using a C-clamp…
Hi! I needed a good way to mount some Cables inside a 19" Rackmount. So I came up with this design. The big hole is for the ziptie, the small one for your screw. You can remix this design for your Use. 3D File is available. It would be…
Kabel sollten immer irgendwie geführt werden. Hierfür ein kleines Teil was das CPU Kabel an der Seite festhält. Benötigt wird: 1x Einschmelzgewinde/Short m3 1x m3 6mm bisschen 1mm Moosgummi (optional)
