Counting matching models…
This is Fanart, so please don´t use this for commercial printing! I sculpted her in Zbrush and the STL´s are orientated as i printed them. You will need supports on all parts, except the base. You´ll see that some parts have Errors in the…
I needed a mount for my scarlet 2i2 to declutter my desk, so I drew up this design, intended to mount wit 4 countersunk screws. The audio interface slides in and is held in place through a tight friction fit, sturdy enough to not move…
Persian Cat inspired from the book Dungeons Crawler Carl. We made it as a present for our friend :) How we put the glasses onto the cat: We put magnets on the 3D model inside the cat's eyes and on the back of the glasses. We have a store…
I found several existing mounts for the Focusrite Scarlett Solo (3rd Gen), but all of them had some fancy locking mechanism and/or required supports to print properly. More importantly, it looked like all of them were too close to the…
Grandpa UP Valentine Love Heart Balloons Carl Fredricksen For best results and minimal layer lines, use a fine layer height (around 0.1–0.12 mm) and slower print speeds to capture small details—particularly in the face and hair. PLA or…
Be careful when breaking in the joints, or the joints might literally break I made this model in Tinkercad, and it was a very painful process getting it to a point where it could be exported, but I finally have done it after hours of work…
I made a low poly version of my Princess Donut model! You can use it either as a Persian Cat model or just as Donut. NOT AI. Modelled in Zbrush / Blender. Rendered with Nomad Sculpt. I made this model as a gift for my friend who is a huge…
Remix of @Christoph_79778 's Scarlett 2i2 mount, widened to match the dimensions of the newer 4th Gen.
Does not require support material Print with back face (power cord plugin area) on the print bed
He's soooooooo cute, look at him flop around. (Hat not included)
Scarlet Spider-Man Inspired face Shell Uses 5mm-X-1mm magnets Face Shell with No Holes is so you can use any magnets you like. Enjoy (5/30/21) There was a issue with scaling on the X axis with a few of the face shells, This is fixed now.…
CHOOSE WHAT YOU LIKE: A single complete piece / two parts Choose if you want your Scarlett to be removable or not - also a few options on how removable Additional cable holders with various sizes Honeycomb may save print material I…
Carl is a mining robot who's fascinated by rocks and stones of all kinds. Don't let him get started on his latest obsession: the effects of Gems!
Under-desk mount for the Focusrite Scarlett Solo audio interface, mounts with either 3M double sided adhesive tape, or with screws up to 3.5mm in diameter. The mount consists of two pieces which are mirror images, both pieces print…
Remix of the fantastic web shooter of Carlos 3D I had to build for my nephew: changed the base to: use MX springs instead of rubberband added channel to thread the nylon wire changed the cover to: print better the back part which was…
I printed it in PETG on a 0.6mm nozzle at 0.4mm layer height with supports for the fillet of the screw wing. It's very snug - it does not budge when pulling out an audio cable. Print it in the direction of the STL as the back has an inset…
Mr Cupcake model made by me, able to add lights.
Land Rover Discovery 2 carling switch bracket. There are two version - with or without double-sided adhesive tape. For better fixation use double-sided adhesive tape and "DSBT spring". Frame is bonded by aceton using holes in the body.…
The New Year Glasses — Scarlet Black edition — capture the festive spirit of 2026 with bold contrast and sleek design. Crafted from durable matte black material with raised red numerals, these celebratory glasses combine modern minimalism…
All parts come oriented in the optimal position for printing, and are sized to fit on an Ender 3 or Prusa Mk3. Overall, I would recommend printing with minimal infill and a decent amount of perimeters to maintain as much strength as you…
Neeeeeew Achievement!!!! Some weird guy spent weeks sculpting a grown man in their underwear, paying painstakingly close attention to detail…all the way down to his tastefully placed toe rings on his little tootsies. This was all due to…
Support à fixer sous un bureau ou un plan de travail pour la carte son Focusrite Scarlett 2i4 2nd Gen et 2i2 2nd Gen Je voulais un support qui me permette de sortir la carte de son logement en cas de besoin. Attention, les languettes sont…
This is a set of pieces that can be used to recreate the Scarlet Spider figure originally published as part of set 76057 at 500% scale. This is a rare minifig that's only appeared in this one set. All the stl files needed to make this can…
A simple bracket to hold a 4i4 Audio Interface to the bottom of a desk. Has recessed 3mm holes for a variety of screws.
Remix of original model: https://grabcad.com/library/the-male-figure-carl Changes on model fits to seat of 3Dsets Model 8 Buggster his right leg is shorter, fits to pedals right hand on other position brand new ears less belly fat more…
Signage for the Desperado Club from the book series Dungeon Crawler Carl. Color layers in the slicer at .2mm 0 - 13 (2.6mm) - White (I'd try black or a darker color, too many shadows on light color) 14 - 19 (3.8mm) - Red 20 - 37 (7.4mm) -…
I Created this version of Carlita. You will need supports.
Origin: I used the letters from this model to create Name tags as little gifts. I added small holes in the capital letters to screw in a small screw hooks, which can be attached to key rings. Printing: I used a layer height of 0.12mm and…
Part of my Marvel's Avengers Coaster collection where other Avenger coasters can be found. Also print the Avengers Coaster Holder to keep all your Marvel Coasters in! Designed these using Fusion 360 after my favourite comic book, movie,…
This is a faithful reproduction of the Autodromo Jose Carlos Pace. Its dimensions are 20cm long, 13cm tall, 3mm thick and the track width is 5mm, but you can scale up or down any dimension to suit your needs. As it is a simple model, it…
Number 5 in the series! BEEE DOOOO BEEE DOOOO BEEE DOOOO BEEE DOOOO BEEE DOOOO Designed to be mostly friction fit. Couple of spot where glue may be smart Assembly tricks Place top key in skull Place band and assembled goggle over key…
Design Concept The Scarlet model embodies elegance combined with a hint of mystery. Her flowing attire and subtle pose enhance the character's captivating aura, perfect for those seeking a distinguished piece for their collection. Purpose…
Front lens cover for Hasselblad Carl Zeiss Planar T* f2.8/80mm FE. I've included the following versions With logo: Can be printed with 0.40 mm nozzel otherwise the logo wont be printed correctly. A layer height of 0.15mm or lower is…
Straight out of the rainforest and onto your desk. 🦜🌿 The Scarlet Macaw is one of nature’s most spectacular birds, bold, brilliant, and impossible to ignore. Now it’s fully articulated and fits right in your pocket. Every joint flexes…
Under-table mount for Focusrite 2i4 2nd gen audio interface This is a remix of the 2i4 bracket by DJERO . The design has been modified to be printable on the side, and require no supports. Printing on the side should also make the tabs…
A vertical stand with a perfect fit for the Focusrite Scarlett Solo. Free some space on your desk !
I previously had a Scarlett 2i2 Gen 2 mounted under my desk with the mount from ziller88 . After the Interface died i bought a 2i2 Gen4 and modified the mount to work with the new interface. It comes in 4 Versions: Scarlett 2i2 Gen4 desk…
This was just an early draft. Please see my collection here: https://cults3d.com/en/design-collections/RubyxGoodz/gothic-tracery
Under desk mount for the Focusrite Scarlett Solo 4th Gen. (note: 3rd gen and 4th gen are different sizes, 4th gen is bigger so this will not fit the 3rd gen) Designed to not require supports, to allow this it should be printed on one of…
This is an under desk bracket for the Scarlett Solo 3rd Gen. 4x #4 countersunk screws XLR cable clip is 6.5mm wide Print with support everywhere with back the side, where the cable clip is, down.
Scarlet Spider-Man-Kaine Parker Inspired Face Shell Enjoy Category: 3D Printing
A wall plaque of the magnificent princess Donut from the book series Dungeon Crawler Carl written by Matt Dinniman ( https://www.goodreads.com/series/309211-dungeon-crawler-carl ). Printed with PLA and 3 color swaps. Phosphorescent green…
This is a replacement latch for the Carlson brand pet gate we've had for a couple years. After gluing the broken piece didn't work I pulled out Fusion 360 and within a couple of hours had a model to print. Update 3/31/2020: The initial…
Je ne trouvais pas de supports pour les Focusrite Scarlett 2i2 3rd Gen donc j'en ai fait un car ce modèle est bien plus petit que ses prédécesseurs. Je me suis inspiré de ce support https://www.thingiverse.com/thing:3647280 pour faire…
Carl and Ellie - Up Cartoon Wall Art
Holder for mounting your Focusrite Scarlett Solo 3 under the Desk. The Solo 3 can be inserted after mounting the holders under the desk. Dimensions: Height: 45,5 mm Width: 24 mm Length: 57 mm Hole diameter: 3 mm Print instructions Layer…
UPDATED (10-17-2025) v6 DESIGN This a modular mounting system for the Carlon 4x4x2" electrical enclosure, found at most Home Depot locations in North America: USA:…
Interlagos (Autodromo Jose Carlos Pace), Sao Paulo, Brazil, on a stand with it's name. Race track 3x3 mm Stand 198x3x15 mm Gap for putting the track into the stand 0.1x0.1 mm bigger so it's easier to assemble. Looks best when separate…
The Focusrite Scarlett Solo/2i2 4th Generation seem to have no way to disable or dim their status LEDs. If the unit is in a bedroom and the computer is never shutdown, this presents a problem. This is just a basic cover to snap on when…
These are the SVG to STL conversions of the amazing Arkham Horror LCG Standees created by Yves Tourigny, uploaded with the artists permission. To find the original SVG files and loads of other amazing work, please visit…
Designed an easy-to-print under-desk shelf mount for my Focusrite Scarlett Solo interface. I printed mine out of PLA and mounted it with 3M VHB tape. My particular desk has a 20mm square metal frame under the top shelf, so this hangs low…
This bracket has mounting holes compatible with the Balolo mounting grid, but of course you can also screw it to the underside of a desk. Easy to print, PLA is fine, no supports required.
Made with hackerscad. This clip is a parametric model written in hackerscad , a CAD where models are code. Open bagclip.hcad (see also: Examples > Carlo from app's menu) to make your own version: change the number of teeth, the tooth…
https://www.hi3d.ai/share/photorealistic-bikini-woman-3d-collectible-figurine--4845b2a652a54d3495b242b124d28e08?inviteCode=Y8Axoeva9P&shareType=history_model
Follow me on Instagram or Twitter for weekly updates on free, high-quality designs like this. Get exclusive free designs, commercial licenses, and premium model plans on Thangs ! (affiliate link) Brawl stars is a player-versus-player game…
I recreated some classic (JDM-)wheels. They're approximately 1:3 scale and have an diameter of around 13.5cm and a width of around 9cm. They're not a perfect copy as I drew them just after some pictures from the internet. Print them as…
Rear cap for Carl Zeiss Lenses for the Hasselblad V-System. Print Settings Printer Brand: Prusa Printer: I3 MK3S Rafts: Doesn't Matter Supports: Yes Resolution: 0.2 Infill: 15% Filament: Prusament PETG Category: Camera
Kingroon KP3S Printed with 0.4 nozzle, layers 0.2mm, 100% infill. Filament PLA BASICO fron Ctrol 3D in several colours. Yellow thick 2mm, black 1mm and white 0.8mm. Impresora Kingroon KP3S Boquilla 0.4mm, capas 0.2mm y relleno 100%.…
You can use this model to mount you FOCUSRITE SCARLETT 2I2 under the table. Category: Music
LR D3 Carling switches bracket is situated instead of the ashtray. Print Settings Printer Brand: Prusa Printer: i3 MK2.5 Supports: No Resolution: 0.2 Infill: 20 Filament: Any ASA
"Ohh shit... Here we go again!" - CJ
This is a model of the largest land crane out there, the Sarens SGC-250, aka the Big Carl. Built by a Belgium company and shipped to Somerset, England to help build the Hinkley Point C nuclear reactor. How large is this crane? It can lift…
Carlo Acutis (3 May 1991 – 12 October 2006) was a British-born Italian website designer who documented Eucharistic miracles and approved Marian apparitions, and catalogued both on a website he designed before his death from leukaemia.…
Focusrite Scarlett 2i2 - Vertical Stand.
Rest of the body is not mine and I cannot share it, download it here There is no reason to print spiral in color in section you cannot see, so I made my own one from scratch --- Commercial Use --- By purchasing this design on Cults , you…
Keep your place in style with Her majesty Grand Champion, Breed Winner Regional, National Winner Princess Donut the Queen Anne Chonk. God dammit Donut.... Bookmark is 4 layers thick with 0.4mm nozzle @ 0.2mm layer height. Pause after…
Full disclosure: this thing sucks. I put it here cause it's free and hey, maybe someone has use for it or can fix it. I modeled this with the intent of being used for an Erza Scarlet cosplay. It was my first attempt to make something that…
A simple under desk mounting solution for the Focusrite Scarlett Solo (4th Gen) audio interface. I couldn't find any solutions that I liked for mounting, so I designed my own! This is also designed using Zoo's modeling app ! The included…
Designed a desk mount for my Focusrite Scarlett 6i6 audio interface. The idea was to move it below the desk, to reduce the number of cables running across my desk. This thing comes with 1 model (bracket) that needs to be printed 4 times,…
Design This model is for securing a Focusrite Scarlet 8i6 underneath a desk or to a wall. There are various alternative designs but I wanted one that stopped movement forwards and backwards and both sides connected across the bottom, so I…
Puzzle d'un carlin composé de 18 parties, facile à assembler dimensions: 101,5mm x 107mm x 111mm résolution 0,20 remplissage 33% besoin de support
Created using the FigBash beta figure builder program. Named by a Discord user. FigBash is a digital action figure kitbash system. Create the action figure of your dreams by selecting its features, from hairstyles to clothing! These are…
⚙ RECOMMENDED 3D PRINT SETTINGS Material: PLA or PLA+ recommended Layer Height: 0.16 mm for finer detail; 0.20 mm for faster prints Infill: 10–15% recommended for most models Wall Loops: 2–3 Supports: Enable where necessary based on model…
Found a different Carlson latch here ... almost the same, but that was for the release button on the side, but mine is on top. This isn't a remix since the original was in F360 and my trial is up, so it was newly designed in FreeCAD. I…
A bracket to mount the Focusrite Scarlet 2i2 3rd gen. audio interface under the desk top. It has countersunk screw holes, but can also be attached with hot glue or double-sided adhesive tape, the only question is whether the latter will…
I made this so you can allow the unit to have suffiecient heat dissaptation while mounted via 3M velcro in your car. Suitable for GarlinKit Tbox Ambient AI Box. Print in PETG or ABS/ASA. PLA will melt on a hot day and might damage the…
This is one of many model's/statues i have created in blender for a project i am working on. Uploaded here because i don't think it will be using this one in my project and someone might get some use out of it. Although i did not 3D print…
This mounts a Focus Scarlett 2i2 audio interface (3rd generation) under a desk or table. It includes a large hook for headphones below. There is a smaller hook in back for extra loops of headphone cable. I modeled this in Fusion360. Along…
Created using a parametric keychain maker on the Green site.
This is a edit of Ziller88's design. His file for 1st gen has the incorrect foot-groove size and would not work with 1st gen devices (Serial number's starting with S) If you don't know what generation your device is, see this link:…
Chaos Magic Reality Warping - Wanda's unique mutant ability allows her to harness and manipulate the force of probabilit
the Scarlett Solo table attachment 3D print fits perfectly under any table, whether screwed or glued in my case(acrylic)
This is remixed from mirasderbissalin's desk mount to support a 1" desk and a 3rd Gen Focusrite Scarlet Solo. The desk fit is a little loose, has some space for a 3M command strip although it hasn't been needed. Print Settings Printer…
F1 circuit Sao Paulo Grand Prix Interlagos Autodromo Jose Carlos Brazil - with elevation, start line and DRS detectin zones. Data (elevation and circuit shape are taken from f1.com). Can be printed with small supports on DRS and start…
This is a Focusrite Scarlett 2i2 Mount for the Balolo setup cockpit
For the third-gen Tundra's center console. This is for Carling switches, I will add another version for the Toyota smaller push switches as well. Stay tuned. Print Settings Printer Brand: Creality Printer: CR10S PRO Rafts: Yes Supports:…
See “Differences” below for more information
"New achievement! You've discovered and read and official dungeon sign. Wow. You can read. Whoopie." - Dungeon AI, from the Dungeon Crawler Carl series by Matt Dinniman. This is multicolor bookmark based on the Dungeon Crawler Carl…
I believe this is the Myoho Muramasa from Scarlet Nexus. I used the cosplay guide for references. Should be full scaled. Base is 1 solid piece, The two other files are for those who want to slot in the blade. I am "pretty" sure itll fit…
Mount for Focusrite Scarlett 2i2
A Carlinkit mount for the original phone holder of the Dacia Sandero Stepway. Plug and play. Print it in asa/abs/petg
Italy Imola You can build a racing circuit in Monte Carlo using roads from the Racing Circuits - building kit . Here is a list of the parts and how many you will need: A1CLRC - 2× A1LRC - 4× A2CLRC - 3× A2LRC - 6× A3CLRC - 4× A3LRC - 18×…
This is a set of pieces that can be used to recreate the Cavalry Colonel (Colt Carlson) figure at 500% scale. This figure was released in 1996 and appeared in 4 sets between 1996 - 2002. All of the stl files needed to create this have…
A under desk mount for a Scarlett Solo. Includes ports on the back for the USB c and the ¼in Ports.
Under desk mount for Scarlett 4i4. As drawn, it fits, albeit very snug. If you want a little wiggle room, might want to scale it up a bit. I used #8 flat top screws. (U.S.) The screws countersink perfectly to clear the housing of the…
