84 models
From left to right on 2nd image; 1: Round Top 2: Flat Top 3-5: O-Ring Sealing, Plus Cutaways, SAE AS 010 and Metric 2x6mm O-Ring Sized Versions 6: TPU Printable O-Ring Insert for SAE and Metric Sized Caps (Insert so 45 degree angle faces…
Very simple Nintendo Switch game carts holder. 2 size, 6 or 12 carts. Layer height: 0.3mm Infill: 20% Support: None Check my other version that fits in a Switch Game Case. If you enjoy or find this model useful please make sure to click…
You can use a screw and nut in the top hole to secure the cart for storage https://a.co/d/5vAbloZ I used these grease nipples. I needed to heat the nipple and screw it into the cart. might need to make the threads bigger
Desk organizer that includes 9 different slots to fit 510 cartridges.
Designed for 12x60mm or 74mm carts. If you need a different size, just leave a comment. 0.25mm tolerance, 0.375mm crush fitting. Lady: 17in thigh circumference Gent: 24in thigh circumference If you're unsure which one to go with, just go…
Resized Bitcoin model to 5, 10 and 20 CZKs. Ideal for shopping carts. bc1qn50lfaawu9344xw2g85v0pl6nk6av644mw7la8
This canteen is designed to hold a 80mm ecig battery and 62mm or 52mm carts Join my patreon to sell this commercially! https://www.patreon.com/mozWORLD
Loonie & Quater token for shopping carts
I created these "coins" based on the dimensions of a loonie and quarter. I use these coins for shopping carts cause I never have a real coin on me. Print Settings Printer Brand: Prusa Printer: i3 MK3 Rafts: No Supports: No Resolution: 0.2…
its a fake quarter for Aldi's carts because i never have change for those things and wanted to make a simple one for my self
A coin the size of 5 ILS, for use in shopping carts. Print instructions Licence: Creative Commons - Attribution - Non-Commercial - Share Alike Category: Coins & Badges
I designed this cart storage module for my limited cart collection, it’s handy for sitting next to my computer when playing. I sized the holes just big enough to fit the AVGCART so it will hopefully also fit SIDE 2&3. Normal carts…
The Golf Cart Cup Holder Adapter fits the small cup holders on EVolution Golf Carts, or any other similar cup holders. The adapter accepts up to 3.5 inch diameter cups in the original 2.5 inch diameter cup holder.
Gold drigger carts with tools minialistik
Keychain coin for shopping carts. It can be removed easily with a little pull, doesn't need to be ejected with another cart.
A Muha Meds stand for those BM carts everyone seems to love. Made for a friend, I don't use them but was told they fit well and that it printed nicely with no supports.
comes with a handle so you can pull it out to reuse it. may bend more easily if using pla. has a hole for a carabiner, if you use a carabiner to hold things other than yourself.
Introducing the LCD Screen Shade for Kandi and Coleman Golf Carts 3D Model: Elevate your golf cart experience with our meticulously designed LCD Screen Shade, tailored specifically for Kandi and Coleman models. This innovative 3D model…
5 shekels coin with keychain adapter. The holder hold the coin by snapping. I added this to my keychain and to numerous car keys and it works great! Don't use supports in the holder part.
So I designed this after a injected model part that I lost.It works on most shopping carts but also feel free to test it out for yourself. :) Layer Height:0.2 Line Width:0.4 Resolution:0.2
I needed to have some change ready in the car at all times to use the shopping trolleys, but since I rely solely on my credit card, I was too often unable to take the shopping trolley. The size of these coins meets European standards.
Took care of the following: No more printing on the air (proper overhangs limited to 60 degrees) Smaller footprint Springy lock step for the coins (to avoid relying on friction only, coins pop in and out) Proper angled form for 5-ILS coin…
Key for shopping carts in Russian stores
Just a simple shopping cart token / Einkaufswagenchip. A heart to give away or for your wallet.
Made to use with shopping carts in Canada, which require the dollar coin/loonie. Handle for ease of removal and easy storage.
With this piece you can fit 2 Nintendo DS cartridges into one slot of c_anthony's Cartridge Holder! Category: Video Games
Oxygen Tank Mount for Waterloo Medical Crash Carts, Model OTB-4 Example of this specific part here. The OTB-4 oxygen tank mounts for crash carts frequently break. Given that Waterloo Healthcare supplies over 5,230 hospitals with over…
An easy to remove 100 Ft coin for usage in Hungarian shopping carts. It can be removed after unlocking the cart by sliding it out while moving it to the side of the coin notch, a video of the process will be uploaded later. Print Settings…
There are two plate models, one for heat-set inserts and one with standard hex nuts. Heat sets designed for M4 threads There is a small lip so you can snap the insert in place then melt it. Hex nuts model designed for M4 nuts ("standard"…
No supports. Also works as a shopping cart unlocker in the original size. If you love it as much as I do, please show your support by giving it a like, downloading, and sharing it with your friends. Every like and share helps to spread…
I designed those four emoji/smiley key pendants for my daughter's school charity event and want to share them with you all. Those models are designed to be printed in multicolor. Therefore, all segments, like the eyes and mouth, are…
Customized version of https://www.thingiverse.com/thing:2634818 Created with Customizer! https://www.thingiverse.com/apps/customizer/run?thing_id=2634818 Instructions Using the following options: numX = 3 numY = 5 bottom_thickness = 1…
Token for shopping carts is very helpfull thing, if you don't have any coin by your pockets. Use 3MF to get better results If you have request on some variant of brushes, let me know in comments ;)
1:16 scale toy harvesting train carts as used for apple harvesting. You will need to make one “front” cart per set. It can be connected to as many “follower” carts as desired. Compatible to Bruder 1:16 tractors or to the printable 1:16…
I remixed this from Byrn3D's model since I wanted a smaller piece to hold just a few carts. It can be printed without supports in the model orientation. Printed on Ender 3v2 with blue Hellbot PLA, 0.2mm layer height.
The GSCARTSW with USB power port is flawed. The USB port can be easily ripped off from the PCB if you handle is less carefully than taking care of your first born child. Hence this USB port guard. There's nothing special about this print.…
With this piece you can fit GBA carts for which you don't have cart cases or are taller than normal carts (e.g. Yoshi's Universal Gravitation, which contains a sensor) in c_anthony's Cartridge Holder Print Settings Printer: Elegoo Neptune…
TvJab Coin For Aldi Shopping Carts Fits Aldi shopping carts in the US works great I print about 20 at a time and keep some in each vehicle. When the swap the carts when you check out you get a free quarter if you take it back and lock it…
Cup holder for 2008-2016 four seater golf carts (E-Z-GO)
🏆 Built for Set Life ~ ChatGPT This bottle holder is designed to fit on the side of any Adicam or Schlepp One film cart. It is secured with a screw from the inside of the cart, through the existing holes, into the bottle holder. The…
This lovely case of mine was made to fit 5 carts, one battery for activating the lovely carts, and plenty of storage for chargers, cables, and even those little rubber things you always keep cuz they feel neat. Anyhow, get it while it is…
Simple cord wrap for Bretford A/V carts. Fits Tripp Lite PS120410 power strip. Print with PETG and 0.8mm nozzle for strength. The two sides are mirrored.
25 canadian cents mock for shopping carts with keychain handle
Its a Keychain for schoppingcarts it has a diameter of 1€ . print with .2mm layerheight and a .4mm nozzle for the best results.It can be pulled out after unlocking the shopping cart.
With this piece you can fit cased Nintendo DS carts into c_anthony's Cartridge Holder! Print Settings Printer Brand: ELEGOO Printer: ELEGOO NEPTUNE 2S Rafts: No Supports: No Resolution: 0.2mm Infill: 20% Category: Video Games
After purchasing multiple off-the-shelf Game Boy cartridge display stands, I found that most of them tip over easily once fully populated—especially when mixing original Game Boy, Game Boy Color, and Game Boy Advance cartridges. Rather…
It is the same dimensions as a U.S. quarter and it has a ring so you can attach it to stuff.
Keychain for Shoppingcarts print with .2mm Layerheight
cartridge holder for pokeball for 3 gba cartridges, I took the blank insert and put slots for gamboy advance cartridges in it
Another edit: I added a dust protector cap file that you can use for keeping the SD cards safe from dust and from being exposed when not in use. Edit again: I made a varient with a slant on the bottom right corner to make them look more…
Nintendo DS Cartridge Storage Box for 20 Carts with Hinged Lid Simple storage box with hinged lid. Holds 20 cartridges. Has space between the cards to allow for easy access. To connect the lid just feed in 1.5mm filament throught the hole…
The Mighty Max Cart is a sturdy dolly to move heavy things, but the Cargo End Walls are poorly designed. When used without a tub holding the four corners in place, the bungeed end pieces pull inward and eventually pop off. I designed a…
There are a couple parts on the Vernier sensor carts that seem to fall off and get lost easily. Vernier has been great at sending us replacements, but rather than the hassle of calling and waiting, I figured we'd model up a couple quick…
Its a Keychain for shoppingcarts with the initials A A . To print use .2 mm , .1 mm or .05 mm layer height.
A Keychain for Shoppingcarts.Print with .2mm Layerheight, and a .4mm Nozzle.
Did you mod your LeapsterGS Explorer? Got no use for the cartridge slot anymore? Fill in the gap with one of these dummy cartridges. You have several options: Plain Dummy Cart (NO Handle). These just fill in the space, and are more…
I made this file to hold a Max Distance XF20 disc golf retriever to my Rogue Iron Disc Golf cart. requires 6 zip ties. I suggest printing out of ASA for temp and sun protection. 0.6 nozzle 15% gyroid infill recommended.
Keychain for Shoppingcarts with initials AD. print with .2mm Layerheight
Keychain for Shoppingcarts: Print With .2mm Layerheight
Keychain for Shoppingcarts. print with .2mm Layerheight
definitely use supports on the whole thing other than the roof i hope you like it and can use it for your dnd campaign
A Keychain for Shoppingcarts with initials AB. Print with .2mm layerheight.
Keychain for Shoppingcarts print with .2mm Layerheight
multi purpose coin chip with two different sides (skull and star)
Bumper case for the gSCARTsw line of video switchers. There are 3 versions of the bumper 5.2+ works with all MicroUSB style gSCARTsw 1.4 works with older units with barrel jack plugs VGA works with some of the oldest switches, any with…
Pi coin sized for shopping carts Will upload print pictures in near future
If you are like me, you have probably lost these, or just simply do not have enough! Since they are just a plastic part, I figured why not take a shot at making a design. Since I am already designing so many models for my Vernier…
A display stand for NEOGEO AES's massive cartridge cases and cartridges. It can also hold an Atari Lynx model 1. Supports: NO Print time: 50 minutes Filament: 13g PLA+ Settings: Default (you can lessen the infill a bit if you'd like to…
After purchasing multiple off-the-shelf Game Boy cartridge display stands, I found that most of them tip over easily once fully populated—especially when mixing original Game Boy, Game Boy Color, and Game Boy Advance cartridges. Rather…
comes with a handle so you can pull it out to reuse it. may bend more easily if using pla. has a hole for a carabiner, if you use a carabiner to hold things other than yourself.
Bumper case for the gSCARTsw line of video switchers. There are 3 versions of the bumper 5.2+ works with all MicroUSB style gSCARTsw 1.4 works with older units with barrel jack plugs VGA works with some of the oldest switches, any with…
I made this file to hold a Max Distance XF20 disc golf retriever to my Rogue Iron Disc Golf cart. requires 6 zip ties. I suggest printing out of ASA for temp and sun protection. 0.6 nozzle 15% gyroid infill recommended.
multi purpose coin chip with two different sides (skull and star)
definitely use supports on the whole thing other than the roof i hope you like it and can use it for your dnd campaign
A set of aircraft tow tractors, missile carts, ladders and adapters for the 1:48 Bandai DX Chogokin line of VF-1 Valkryies / Veritechs from the Macross TV series and movies. The set includes: 3 numbered tractors aircraft tow bar couplers…
Tokens cannot be inserted into the closing mechanism of shopping carts. Dimensions: 62.99 x 25 x 2.35 mm Printed on MK4, PET-G Can be attached to keys No resale, for personal use only
Here's some wall stands for the gscartsw from SuperG, where you can just slide it in. I took in count both plexiglass and the small rubber pads for the height, so it should just sit nicely. You need at least two of them, up to 4 to…
A display stand for NEOGEO AES's massive cartridge cases and cartridges. It can also hold an Atari Lynx model 1. Supports: NO Print time: 50 minutes Filament: 13g PLA+ Settings: Default (you can lessen the infill a bit if you'd like to…
