Counting matching models…
I remixed a wall mount for Lego Speed Champions sets, as the original design had two separate wall mounts for a single set. I joined two together, ensuring they were the precise width required for accommodating any Lego Speed Champions…
CHAMPIONS LEAGUE https://cults3d.com/en/creations/new Category: Sport & Outdoors
Before you go further! This model is available for free for all my supporters in Printables Club 🧡 Consider joining my club to have access to all ⭐⭐⭐ exclusive projects ⭐⭐⭐ and be part of my community! This project is for personal use…
this was created under Riot Games' "Legal Jibber Jabber" policy using assets owned by Riot Games. Riot Games does not endorse or sponsor this project. dm me for more models, happy printing
This is a wall mount designed for LEGO F1 Speed Champions sets. The most popular commercially available mount for these sets (which this model was inspired by) requires the use of screws, which is not always an option for renters or if…
This is a wall-mounting bracket to be used with the smaller F1 Speed Champions Lego sets. It can be printed without supports (big, flat side down) and features a 4mm countersunk hole for attaching. Print pictured used the following…
The original throphy is 540 mm tall so is the model, so you'll probably need to scale it down or cut it into pieces. I've uploaded the cutted version, and if you don't have an mmu or an ams unit you can print first the whole thing without…
Hello, this is my first model I have designed and it is a way to hang the LEGO Speed Champions on the Wall removing the clutter from my TV Stand. I designed it using a hole large enough for a screw and to be attached using a drywall…
"The Aegis Of Champions is the ultimate symbol of victory in the epic struggle between Dire and Radiant. Never given, only earned, the shield is hefted by those who best prove themselves in the great tournament." ( dota2.com ) I made two…
I re-mixed the Lego Speed Champions Car Lift model to better accommodate the pre-2020 cars that are 6 studs wide (the newer cars are 8 studs wide and will not work unless you scale up the model.) I also redesigned the floor to reduce…
Another model from my 15-year-old son, this time inspired by hours playing the game Valorant. Quite a lot of experimentation went into the creation of this cosplay prop. The ease of which the parts of the model connect together will…
The stand should fit the majority of the 8 wide speed champ cars. It's just wide enough to fit the McLaren Solus GT on the bottom and the Merc F1 is too long for the top to give you an idea for scale. The tabs on the ‘Car stacker plate’…
Lego Speed Champions Stand for post 2020 models. This is a remix of a great model created by RobC. You need to take pillars and other parts from the original model and my remixed platform.…
A nice model to display some Lego cars! No supports needed and can be done in under two hours. For Speed Champions cars a 4x6 plate is attached to the bottom (see photos). I also recommend some glue between the 3d printed part and the…
We're huge fans of the LEGO Speed Champions series over at casadebricks.com With so many great cars, we started to run out of space to display them so built these stand options. Simply print at 20% infill with 4 perimeters and then push…
Do you like interesting car models, especially F1, from the LEGO Speed Champions series? Give them a representative space in the frames on the wall. The available IKEA Sannahed 25 × 25 cm frames are ideal. First, print a test piece on…
These are 45 degree angled mounting platforms to display your 8 stud wide LEGO Speed Champions, the mounting plate hooks into the chassis pieces with 4 studs, I made a modified version for the 1970 Ferrari 512M, see the 4stud file for…
A sleek, minimalist 3D printed display stand for the LEGO® Speed Champions DeLorean. This stand is easy to print and will look great on your shelf! I printed my stand using default print settings with a few modifications. Since the bottom…
Circuit de Spa Francorchamps, Stavelot, Belgium, on a stand with it's name. Race track 3x3 mm Stand 198x3x15 mm Gap for putting the track into the stand 0.1x0.1 mm bigger so it's easier to assemble. Looks best when separate parts printed…
This insert is designed to fit the revised version of the Lord of the Rings LCG core set. This also fits the “Saga” expansion boxes as well for the LOTR LCG, since the boxes are the same exact size. I included the files required to print…
This is a remix with the universal hooks for the Ikea Skadis pegboards.
Every Liverpool fan knows what the Champions Wall is, now you can have your own Champions Wall at home. I included all numbers, so you can keep it up to date. ;) Please let me know, if you would like me to add or change anything.…
I made three of these trophies for a chili eating contest and decided to also upload them here. I borrowed the chili champion statue from the Chili champ trophy from Thingiverse. Manufacturing instructions I printed the chili champ figure…
Deutsch: Ständer für die LEGO® Speed Champions F1 Reihe. Mit F1-Logo und Klemmbaustein-Einsatz für die Figuren. Kein Kleber oder zusätzliches Material nötig – einfach drucken und verwenden. Viel Spaß beim Drucken! English: Stand for the…
This is just the WWE heavyweight Championship belt. i printed it on my anycubic neo with pla. enlarged it to 105%
Hello, this is my second model I have designed and it is a way to hang the LEGO Speed Champions on the Wall removing the clutter from my TV Stand and displaying the iconic LEGO Minifigure for each set. I designed it using a hole large…
Modular display stand for Lego Speed Champions, parameterized for more customization including a parameter for the tolerance for a good fit no matter how (in)accurate your 3D printer is. The attached STL files worked on my printer. I…
Remix of the car lift designed by GigaPenguin. Parts required Base x1 Second Floor x1 Pillar x4 Lock x4 Pillar Cap x4 Infill 20% Material PLA Resolution 0.2mm
The tolerances are slightly tight. The tolerances on my printer allow it to be easily slid into place but it can be slightly difficult to remove if pulling at an angle. You can use command strips or screws with these shelves in order to…
Remixed from Daan Kleinen's version 2 mounts I have made a smaller one for the older Lego Speed Champions. I have left the mounting holes within them so you can still screw them to the wall. I just Used command strips and seams to work…
Alternative tokens to replace the Stunned, Confused, and Tough mini cards used in Marvel Champions LCG. The modes incorporate superhero silhouettes into the design. Token size: 21mm x 21mm x 3mm I printed with a 0.25 nozzle @0.15 layer…
I wanted to display my Lego Speed Champions on the wall using double sided tape. Therefore i made a remix on the 2 projects and looks well :) Be sure to use strong tape or else you will need to rebuild some models ;). Also added a variant…
Display your LEGO Speed Champions cars with a clean, angled desk stand. This 3D printed display stand is designed for LEGO Speed Champions style cars and lets you show off your collection without taking up a ton of shelf space. Each car…
easy remix just to reduce holes and make it easier to hang. PRINTING PLA, PETG 15% infill is enough 0,2 Layer
This is a faithful reproduction of the Circuit de Spa-Francorchamps. Its dimensions are 20cm long, 12cm tall, 3mm thick and the track width is 5mm, but you can scale up or down any dimension to suit your needs. As it is a simple model, it…
After I didn't find anything suitable. I decided to design rims for my Speed Champions vehicles myself. I have therefore designed 8 different sets. In order not to put the same rims on everyone. There should be something for everyone. ;-)
These are tokens for the Marvel Champions LCG to be printed with three different colors. In contrast to the original tokens, these tokens have two different numbers on the front and back side. This makes counting damage up by one slightly…
What is this Marvel Champions tends to require quite a bit of table space, especiallay when playing with two or more players. And, depending on the lighting, sleeved cards are sometime hard to read due to reflections. These card holders…
This is a 3D printable, screw-together draw ball inspired by the iconic lottery balls used in UEFA Champions League draws. It’s perfect for raffles, giveaways, tournaments, or even classroom games. The ball consists of two threaded halves…
Bring the ultimate flex from Roblox Rivals into the real world! This is a 1:1 scale, highly detailed 3D printable model of the iconic Gold / Champions Karambit. Designed with a clean, low-poly aesthetic that perfectly matches the game's…
Are you a Monopoly Champion? Show it off by printing off this marvelous trophy! You can add to the plague to make it even more personable.
Description Knitted Collection: Your Cozy Mushroom Friend! 🍄 Warning: May cause spontaneous smiling! This adorable little mushroom looks like it jumped right out of a knitting basket, inspired by soft yarn plushies. It's surprisingly easy…
I've reverse-engineered and refined the original system to enhance usability and design quality. Here’s what I’ve changed: Improved Pillars: Redesigned for easier assembly with better clipping functionality. Added chamfers to the edges…
A mighty owl-man adventurer with natural stealth and night-vision. Collect them all! Check out the FULL COLLECTION HERE: https://www.printables.com/@TripleGWorkshop/collections/2198626 Designed to print with Tree Supports on build plate…
My display uses 3 of the 14.25x22" SKÅDIS pegboards from Ikea and two pairs of the connector brackets they sell. I wanted to be able to mount my 10 speed champions F1 cars to the wall and be able to move them around throughout the season…
Making a Buckeye ring for upcoming Championship game. Internal diameter is 20mm-ish so resize EVERTHING if you want bigger or smaller. Print different p[pieces and glue together. Go BUCKEYES Print Settings Printer Brand: Creality Printer:…
Model of the College Football Playoff National Championship Trophy . I printed this in anticipation of the upcoming college football video game so that my friends and I have something to play for. I printed the outer pieces with a brim…
Perfect for decoration or a trophy topper. This high-detail model may not survive being scaled down. Enjoy! Tree Supports on build plate only Partially Powered by image-to-3D from MakerWorld (https://makerworld.com/makerlab/imageTo3d)
Edit: 24.10.2023 Created tray for the tokens for my insert - it fits 20x double sided of them https://www.printables.com/model/589480-marvel-champions-lcg-insert-935mm-card-sleeves -------------------------- Ready and Used tokens for…
voici le model pour qu'il puisse bouger il faut mettre deux vis avec deux écrous
This wallmount allows you to place your LEGO Speedchampions Car's in an 45° degree angle off the wall. It will fit all cars which have the basepart as you see in one of the pictures, like these: Lamborghini Countach #76908, Koenigsegg…
The original bowl is 590 mm in diameter, so I uploaded a smaller version, and one cutted into pieces too. If you printed it out don't forget to upload a make. If you need some changes (f.e.: different colors differnet pieces) then don't…
I wanted an organizer with all the playing material to quickly grab for a game or two without sorting baggies full of tokens into trays. As it sits in the shelf I also wanted it to look nice. The organizer fits: All tokens except for a…
This minimalist display stand is the perfect way to showcase your LEGO Speed Champions cars
A simple bracket to hang the car directly on the wall. Printed with 25% Infill, support is necesary.
This is a wall-mounting bracket to be used with the smaller F1 Speed Champions Lego sets. This one has the car nose pointing down for a better view of the cars themselves. If you don't have a 3D printer (I know, odd place to mention…
Print such that the ring face is perpendicular to the build plate and add supports so that the ring is strongest. If you plan to edit the designs print in higher resolution.
Rebel champions are the elite, heavily armed members of Regala's rebel army. This machine is to scale with the official board game and stands on a 20mm base. It is intended to be printed in one piece (with the base) for stability. All…
Lego F1 Speed Champions Wall Mount for New and older F1 Lego Models Printed with 0.4 Nozzle, 0.2 Layer high, 20% infill and without Support. Screw Hole Version is 4.5mm in Diameter
This is a version 1.0 of Drivers' World Championship Trophy from Formula 1 There is a file called WDC_trophy_whole, which is either for people who want to paint the whole trophy or for the people who use MMU/AMS systems. Other files are…
A great garage for speed champions that also keeps them protected during storage. 4 doors with brand logos and 1 blank, feel free to create more! There's a small lock system with a little key but not really very useful
What is this Certain upgrades and encounter cards modify basic powers on character cards. These counters can help keeping track of the modified values. In the example below Adam Warlock was able to get out all three of the upgrades from…
This is a simple mounts that hooks around the front wheels of most Lego speed champions. it mounts with a single screw
Celebrate the spirit of football with this iconic World Cup Trophy 2026 🏆 This detailed 3D model captures the legendary shape of the world’s most prestigious football trophy, complete with elegant curves and a strong, recognizable…
Print-in-place, foldable display stand for Speed Champions F1 cars Show off your Speed Champions F1 cars in style with this display stand! Designed for easy 3D printing, it prints flat in a single piece and unfolds into shape - no…
Marvel Champions - divider to official box
💥 Double the flex, double the style! Bring the ultimate endgame weapon from Roblox Rivals into reality with this 1:1 scale, highly accurate 3D printable Gold / Champions Dual Kunai. Designed with a sharp, clean low-poly aesthetic that…
Version 2.0 Reduced size and added L E G O brick so it wouldn't swing left and right Easy to mount and barely noticeable while in place. Hole is made form M3 type screw. Print in wall color for the best look. Suitable for set models:…
This is a remix of the two part villain stand for those with larger printers that can print the whole stand in one go. Version 2: No Conditions slot for Villain Version 3: Acrylic token holder for Conditions on the side for Villain…
2nd Place Trophy for our Fantasy Football league. Modeled after the Lamar Hunt/George Halas trophy, (the AFC/NFC Champions get). The loser of the Superbowl gets one of these so I figured it would be an appropriate "silver medal" to design…
Just as it's stand in the title!
This is a reproduction of the Champions Hockey League trophy There are two models, one with the logo of the CHL and another without Printing tips: You only need a bit of support for the handles of the trophy
-I've created 3d models of the Rainbow 6 Champion Rank. These must be highly scaled in the slicer (Cura will auto-scale), due to an issue in Onshape with exporting to stl, however the details still appear well. -Each file is each color…
I like the idea of arranging the cars from the Lego Speed Champions collection on shelves above each other, like MroznyHipis suggested . I also like modularity, but not when it smacks of assembling lots of interchangeable parts,…
Step up your ladder match game by adding this WWE themed championship title hanger to your action figure collection. It's to scale with the Mattel WWE action figures and comes in two versions (with and without the WWE logo), as well as…
Support pour F1 Lego, Pas encore Testé à l'impression mais fait avec soin
Car lift ramps for any 8 stud wided speed champion cars and SUVs as well as narrowed the ramps to fit the F1 racers Update 6/14/2026: added narrower rams for F1 racers and widen pillars to have a tighter fit Update 8/9/2024: created some…
Fits for the most Speed Champions models
I designed this Marvel Champions Hero Box to fit a normal hero deck, sleeved (in Dragon Shield specifically), and to be labeled via a printed insert (cardstock/laminated preferred) slid into a slot. If your sleeves are taller than Dragon…
A soccer champion trophy or award. It is designed to print without supports. If you collect or download, please "Like". Print at the highest resolution settings on your printer for the best results.…
Lego Speed Champions F1 stands for 2 cars. You can easily print and assembling, the model is ready for a kit of 2 cars, but you can of course clone based on your needs.
Description The new format for Arkham Horror LCG campaign boxes prompted me to share these files since previously they were only useful for the Marvel Champions core set. This insert deals with a couple of the issues I had related to the…
I decided I wanted to be able to display my LEGO Ecto-1 in the middle of my Hexagon MiniFig Display that I've been printing thanks to Casadebricks.com's Extended Minifig Hexagons. So I created this shelf specifically for that particular…
This is the Pokemon Championship Cup, designed by my son when he was VERY VERY into Pokemon! It's perfect for little Pokemon figures sit atop! Check out more like this at https://superherodiy.com , and follow me on Instagram:…
This model allows you to hang your Lego Speed Champions cars on the wall in less than 5 minutes! Nails are required for this model. Common picture frame hanging nails work perfectly. I know of two versions of the mounting area on the…
You don't have space, but you want to display with style all your F1 Lego Speed Champions . With this modular display you can do it. This model is compatible with the LEGO sets 77242, 77243, 77244, 77245, 77246, 77247, 77248, 77249,…
Quick and easy job to replace the awful mini cards for the Tough / Confused / Stunned statuses on Marvel Champions LCG. Print these @0.20 layer height in your favourite colours and make sure you trigger a filament swap at layer 1.80 to…
a great way to showcase your cars if you dont want to use a garage lift style or wall mount it the fit is a little lose even with 5% gyroid infill its still strong
A custom designed trophy. Great for all occasions that you need a trophy. Left space on bottom plaque for your own text and customization. Printed in PLA. Snug supports at 30 overhang threshold. Infill is up to you depending on how…
Three simple shelves to display your Lego Speed Champions models at different heights. Position with shelf down on base plate for easier printing.
Custom wheels for the Countach, loosely based on a real deep dish design. I've made the rear rims have a deeper dish than the front, but fitted on the same size tyres. Not too much realism as it's Lego! 4 x tyres (tires) in black 4 x…
I printed it with a 0.25 nozzle. For me, the glass shaft is unexpectedly stable. Probably depends on the filament. Otherwise, you can simply replace the shaft with a piece of wire or print the whole thing out a little larger. Print the…
This display allows you to store your Speed Champions models in an efficient way. The displays are infinitely stackable and easy to disassemble or add more if needed. It is assembled without glue, so achieving the correct tolerances is…
A car stand for LEGO speed champions cars.
What is this A simple sorting box for the counters that come with the game and another one for custom counters. The boxes can be closed with a sliding lid that clicks into position. The lid has the Marvel Champions logo on it, but there…
A remix with deeper lego studs for better attachment to the cars.
Español : Stand para Lego Speed Champions, queria algun stand que los mostrara en un angulo particular para poder verlo de todos lados, por eso cree este en particular. Si no encaja correctamente en la placa principal aplicar un poco de…
this prints very easy with no supports. It looks much better if you iron the top.
![LEGO Speed Champions Modular Display Stand [last update 21.07.2024]](https://media.printables.com/media/prints/532084/images/6044190_522b121d-3533-45b1-9d14-b2a10072eb0b_b8c2e7a3-f852-4a50-bf7b-1311d4b55232/sc-2024-3-2.jpg)
