58 models
Overview This is a simple dosing tube holder that just uses friction to hold dosing tubes from this Chihiros Dosing Pump System: https://www.chihirosaquaticstudio.com/products/chihiros-dosing-pump-system I had issues with the original…
This is a tube holder for 4mm od tube used in chihirose dosing system. Of course you can use this holder for any other tube routing application other than the dosing system. Versions for 2, 4 and 5 tubes available, if you need other tube…
I had clogging problems with the original tube holder of Chihiros dosing pump. This holder has larger openings to avoid clogging. Works fine at my Juwel aquarium and with the original Chihiros tubing. Printed with Prusament PETG Nozzle…
Light shades for the Chihiros WRGB II series aquarium light. 1x per side for WRGB30 II 2x per side for WRGB60 II
Hi guys! I spent a lot of time searching for a ready-to-print file for Chihiros WRGB 2 side shades, with no luck. If you're familiar with the hobby, you probably know, that this particular lamp has dedicated front and back shades and none…
Holder / Inlet for 4mm (Chihiros) fertilizer dosing tubes. Aquarium glas 6, 8, 10 ans 12mm. Feel free to ask for other. For 1 to 6 tubes.
I used these corrugated plastic sheets and cut them to size to use as light blockers for my Chihiros WRGBII https://www.michaels.com/product/plastic-corrugated-board-by-creatology-M10567770 The clips just slot into the light and hold the…
Not my model, just remodeled/reuploaded to be printable with multiple colors Uses 4 colors Kaonashi for multi-colored FDM printing. Original Artist info: Kaonashi for 3d printing. Help me keep doing what I love! ❤…
I designed these to snap fit into the second groove of the top of the fixture. The print 3MF is oriented in the file stand up on its edge so that you can scale your Z height to the length you'd like to print (or your printer can handle).…
Basic stand for Chihiros A Series, inspired by the Chihiros WRGB ll Slim.
Printed with PETG, 0,2mm layer height and organic supports
Chihiros Dosing System tube holder designed for the Juwel Lido 200. This mount fits on the edge of the tank, no glueing or similar needed. Supports should not be needed if the print is aligned on the side as shown in the picture. For the…
Chihiros Dosing System tube holder designed for the Dehner Aqua ProLine 100. This mount fits on the edge of the tank, no glueing or similar needed. To be able to still close the lid, you need to cut a recess in the lid. To cover this, the…
The factory metal leg stand holders doesn't fit on the Aqueon brand fish tanks, this redesigned leg stand holder now makes it possible. Factory leg stand holders have a grub screw on the side to make the leg height adjustable, due to…
With my Eheim Proxima Aquarium cover , the original holder from Chihiros doser that came with it didn't fit. You can print it without supports. Best ist PETG or ABS.
Mount for the Chihiros A Series with 3mm screws.
A power brick holder for the Chihiros Vivid 2 aquarium light.
I made this model for my new Chihiros A II. I wanted to make light holder with minimum distance to glass.
Low profile mount for taller aquariums with tighter fit around the glass, made for Chihiros WRGB II SLIM 60 cm wide, but it should also work with wider ones. Could be printed without supports with a little cleanup later. Use 3 perimeters…
Chihiros WRGB II PRO hanging mounts. V2 is stronger! Be sure to print in PETG and on 100% infill.
Should be printed at 0.2 with an exterior brim
Also had enough of being dazzled by the Nano Cube lamp? Here I have a useful thing for you. A lampshade to just put on the Chihiros LED System Serie C - C201 . This lamp is not getting hot, so you can use PLA for the print. Print Settings…
This is a light stand made to hold the Chihiros Magnetic Light that I will link below. This is the best lighting solution for small aquarium scapes. I designed it to use the metal disk that comes with the light as well as the ability to…
I got Eheim Vivaline aquarium and when purchased Chihiros dosing pump I realised that I am unable to fit Chihiros Dosing Tube Holder, as there is a huge rim on the top of the aquarium. So I designed this holder, which snugs perfectly into…
💡Custom Lamp Holder for Chihiros LED A2 Optimized for Dennerle NanoCube with Glass Cover The original Chihiros A2 holders often cannot be mounted on Dennerle NanoCubes if the top glass cover (and its holders) is used, as the original…
Chihiros Series B Light mount for Aqueon aquariums. The stock mount is too small for tanks with a large black rim like Aqueon tanks. This mount fits the original metal rods and fits snuggly on an Aqueon tank rim. I suggest printing with…
This is a mount for a Chihiros Series A 601 for my Aquatlantis Fusion 70. I found this on Thingiverse https://www.thingiverse.com/thing:5136910 but it was too short and a bit too loose. So, I redesigned it from scratch to better suit the…
I designed this shade for the chihiros b30 light so it snap right in place like the original one. You can add a mirror if you want. It's at 45 degrees with 2.5cm extend. Snaps right into place. It's a little bit smaller than the lamp as I…
I made this to fit my Chihiros Universal WRGB 1000 onto my Dehner Aqua ProLine 100, but i think this can be also usefull for other tanks. If you need another size, feel free to remix it.
Please mind the correct orientation during installation. The rear shade is slightly shorter to allow unobstructed movement of the lamp. For improved light efficiency, an aluminum foil layer can be added inside the shade to enhance…
This small but useful lip for the Chihiros A-601 prevents glare when you're lying on the couch or bed, for example. On my Chihiros A601, the distance between the end caps is 588 mm, so I divided the elements into two 200 mm parts and one…
A simple mount for Chihiros A Plus Series. Just stick through the lamp and adjust the mount to the width of the tank
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm The Model is 133.3x200mm in size You may print at higher layer heights below the Base Thickness of 0.48mm The Max allowed Thickness is 2.72mm and the Actual…
🐉✨ WallArt – Spirited Away Step into the magical world of Spirited Away with this detailed WallArt inspired by the unforgettable connection between Chihiro and Haku. The design combines Chihiro and Haku's magnificent dragon form with…
Alternativ holder for the Chihiros A2 Series. The light can be folded up to maintain the tank easily. The bracket is designed for 5mm glas. Please notice that some parts need to be printed twice - once original, once mirrored. Needs a few…
Adaptable Stand for Chihiros Type A fish tank lights. The length is only limited by the lenght of your round wood (i use a birch one). For additional stability i use heated inserts to fix the round wood to the printed parts on the ends of…
Simple bracket to hang the wrgb2 slim into my ikea ivar shelf. Just install the original stand upside down and screw with the bracket on the shelf board above the aquarium.
I wasn't satisfied with the light that comes with the Fluval Spec XV. I found the Chihiros A361 which is a bit smaller but has over double the lumen-output. So I made an adapter to make it fit neatly into the lid of the Spec. I have split…
Simple and internal mounting dosing tubes holder. Can work with Chihiros or any DIY dosing pumps. Package has 3 models: Internal mount 4mm tubes holder 5mm tubes holder Print on your default settings. Nothing special. Attaching to…
Simple model to mount an aquarium light to the rim of the tank. Through hole is 1/8in. Included an f3d file so you can modify it however you want. It has two pegs, one that goes all the way through to allow for height adjustment and one…
🐉✨ WallArt – Spirited Away 001 Enter the mysterious and magical world of Spirited Away with this detailed WallArt inspired by Chihiro, Haku and their unforgettable adventure. The design combines the graceful form of Haku's dragon with…
Chihiros dosing pump vertical holder. I just glued it to the wall. Let me know if there's anything I should change or improve. I hope I was able to help you!
Shade for the Chihiros A 2 Serie LED Lamp. I designed this to optional dimm the light in a part of the tank. The model is 140mm wide, which equals to 25% of a 600mm tank light (light is 560mm). You can modify the wide to make it fit your…
This is a custom mounting solution for using a Chihiros A601 LED light on an 80 cm aquarium . The mounts attach directly to the aquarium glass and are designed for 6 mm thick glass . They allow the shorter A601 to be securely positioned…
I attached an IKEA Hultarp rail to my aquarium cabinet and made a holder for the Chihiros feeder to go with it. v2: I’ve also added my TDS/temp meter and syringe to it.
Low profile mount for taller aquariums with tighter fit around the glass, made for Chihiros WRGB II SLIM 60 cm wide, but it should also work with wider ones. Could be printed without supports with a little cleanup later. Use 3 perimeters…
I designed these to snap fit into the second groove of the top of the fixture. The print 3MF is oriented in the file stand up on its edge so that you can scale your Z height to the length you'd like to print (or your printer can handle).…
Chihiros Series B Light mount for Aqueon aquariums. The stock mount is too small for tanks with a large black rim like Aqueon tanks. This mount fits the original metal rods and fits snuggly on an Aqueon tank rim. I suggest printing with…
Please mind the correct orientation during installation. The rear shade is slightly shorter to allow unobstructed movement of the lamp. For improved light efficiency, an aluminum foil layer can be added inside the shade to enhance…
Alternativ holder for the Chihiros A2 Series. The light can be folded up to maintain the tank easily. The bracket is designed for 5mm glas. Please notice that some parts need to be printed twice - once original, once mirrored. Needs a few…
Simple model to mount an aquarium light to the rim of the tank. Through hole is 1/8in. Included an f3d file so you can modify it however you want. It has two pegs, one that goes all the way through to allow for height adjustment and one…
🖼 Modern Wall Art – Dein 3D-Highlight für die Wand! 🎨 Verwandle deine Wände in echte Hingucker! Diese stilvolle 3D-Wall Art kombiniert modernes Design mit der Magie des 3D-Drucks ✨ Ob Wohnzimmer, Büro, Schlafzimmer oder Flur – dieses…
🖼 Modern Wall Art – Dein 3D-Highlight für die Wand! 🎨 Verwandle deine Wände in echte Hingucker! Diese stilvolle 3D-Wall Art kombiniert modernes Design mit der Magie des 3D-Drucks ✨ Ob Wohnzimmer, Büro, Schlafzimmer oder Flur – dieses…
Love this design? 💖 If you enjoy this aesthetic, please consider supporting my new project, KamiMarks ! While this design looks good here, if you want a printed one (that looks much better) , you can find them at KamiMarks. And it's not…
Love this design? 💖 If you enjoy this aesthetic, please consider supporting my new project, KamiMarks ! While this design looks good here, if you want a printed one (that looks much better) , you can find them at KamiMarks. And it's not…
Der Standfuß ist speziell für die Chihiros Universal WRGB‑800 Serie konstruiert und ermöglicht eine sichere, aufgeräumte Montage deiner Lampe. Durch die universelle Geometrie kannst du ihn theoretisch für alle gängigen Längen der…
