Counting matching models…
Print 2 of the feet. The tolerances are generous so the holder should be easy to push down the slot. Easy to take apart for storage in the box. Designed for sleeved cards.
Clanck! Catacombs insert to help set up game faster that with tens of plastic bags ! Don't hesitate to put a like if you download it :-) For certain lids, I printed without top and bottom layer so it make a grid that permit to see…
Dungeon Row holder for the board game Clank! Holders for the main draw deck and discard pile Holders for explorer, mercenary, and secret tomb cards Holder for the Goblin card (can use superglue or mount with M2.5 x 6mm thread-forming…
Default settings are probably good, thats what I printed with. mine is PETG but it will likely work with all matierals.
/!\ THIS IS A 3D MODEL NOT A PHYSICAL OBJECT /!\ This is a collection of 3d models ready to print an Omniwrench For the physical item, you can contact me to have a price. Buying this listing doesn't allow for resales of prints mades with…
This 3D printable clanker figure is built as a suspended mechanical display piece. The torso and head form the central mass, detailed with sharp plating, bolts, panel seams, and exposed mechanical textures. Instead of traditional limbs,…
The hinge i have used is not printed. I have made a printable version .
Organize your cards and optimize your deck-building games! This 3D card holder is designed for deck-building games like Clank or Dune. It allows you to position your cards vertically, side by side, for better visibility and easy access.…
These are card holders designed for Clank! and it's various base games and expansions. I've designed this because I'm excited about 'CLANK! Legacy 2: Acquisitions Incorporated — Darkest Magic' soon to be fulfilled, but this works with any…
I made as a birthday gift and taught I share it. Hope you like it.
Update 2024.12.03 : Added a split folder, for people who don't have a large enough print plate. Thanks @Libery300_877863 for the suggestion This insert is designed to organize and allow for quick setup and storage of the various…
Print 2 each of the Player Decks and Player Tray files. Player Trays are stacked 3 on top of 3 with the cutouts on each row designed to hold 3 of the character boards. The “backfill” pieces serve to fill the remaining space and have a…
These inserts fit into the Clank! basebox and holds the components, including boards, for the base and atleast two expansions; Clank! Expeditions: Gold and Silk Clank!: Adventuring Party These are the expansions we currently own. There is…
This is a very minimal stand that will hold the 6 market deck cards, the 3 reserve decks, and the standard monster (Goblin). These models stand upright so that the cards are easier to see. These stands will easily fit inside the box. This…
I really enjoy Clank Legacy 2's campaign game, and for most things I enjoy the game components. I've made card display stands to make it easier to see the cards across the table. However I really wanted to make tokens for Ore you get from…
Intended to showcase the Clank! market cards, this adds an extra slot in the back to accommodate a special type of card which is unlocked in Clank Legacy 2: Acquisitions Inc. (Back only shown in photos to avoid spoilers.) The card can…
3D Print Insert/Organizer for a game Clank! Catacombs. Fits also expansions Adventuring Party and Lairs & Lost Chambers. ATTENTION! This insert only include parts that i made myself. Map Tile Holders are the design of Froggieg (use v3)…
Prisoners and Lockpicks holder for the board game Clank! Catacombs
I made this bust of Clank, from Ratchet and Clank. You must be carefull when you retire the supports in the neck. Hope you like it!
Ho creato la versione funko pop del personaggio clank di Rachet e Clank
This is the organizer for Clank!: Catacombs board game. Keeps the original cardboard inlay but adds boxes to organize the components that otherwise would be stored in baggies.
I felt the harpy tokens that come in the Underworld expansion are way too big, laying down they can cover a whole room. So I made harpy pieces to replace the cardboard. I traced the harpy image but I clipped her wings so she wouldn't fall…
Holder for 21700 cells arranged to maximize space 5 and 6 cells wide with position fixation on top of the battery added cutout for nickel strip . Also welding plan (hope no mistakes here :D I am just preparing that for the battery build -…
The benefit of this organizer are the card boxes that act as holders during the game and make sure nothing spills during transport. The card boxes are especially helpful when the cards are sleeved (sleeved cards can usually not be stacked…
This is just the money tray model, fixed from the original remix. You'll want to print two of these. I store the money in one tray and Lord Eradikus cubes and meeple in the other.
/!\ THIS IS A 3D MODEL NOT A PHYSICAL OBJECT /!\ This is a collection of 3d models ready to print an Omniwrench For the physical item, you can contact me to have a price. Buying this listing doesn't allow for resales of prints mades with…
This 3D printable clanker figure is built as a suspended mechanical display piece. The torso and head form the central mass, detailed with sharp plating, bolts, panel seams, and exposed mechanical textures. Instead of traditional limbs,…
Once again, I couldn't find an insert matching my needs for Clank Legacy 2, so I made my own! The pictures don't spoil anything, but the tokens insert could give hints about what it will contain, so that's why I marked this model as…
The hinge i have used is not printed. I have made a printable version .
Pla friendly model. Recommended to print with 0.12-0.16 mm layer, supports on (tree supports ideal). Best result at larger size and slower printing. Material: PLA Layer height: 0.12-0.16 mm (for detail) Nozzle: 0.4 mm Temperature: 200-210…
Stojan na bodovacku aku clanku DOCREATE a prislusenstvi. Stand for a cordless welder DOCREATE.
I used the insert from @cmtaylor333 but I was frustrated because I never remembered what went where. I also wanted not to have to mix cards from extensions with the base cards. So I made this version with different trays and boxes for…
Remixed a great design for my Clank use. Sitting at the end of the table has been difficult to read the cards in the market rows. This solves that with a slight angle. I shrank the sizes and made one of them 1 card holders. Also made sure…
This is a slanted deckbox I made for the cards in the boardgame Clank! and the Sunken treasures expansion. It fits all the adventure cards and the market cards. I keep the 4 starter decks in separate baggies so they are not made to fit in…
Made these for Clank! In! Space boardgame, but I will probably print more and use them for netrunner as well. Print in two parts and glue them together. I use ABS and then solvent weld them together with acetone slurry so it becomes one…
Replacement parts for Clank! board game expansions. Print at least with 30% infill to add some weight. Category: Toy & Game Accessories
This is a remix of some of the components for the board game Clank in Space by Clank! In Space Organizer (incl. both expansions) by Fabmaszter - https://www.thingiverse.com/thing:4578598 It fits the base game, the Apocalypse expansion,…
A model based on Agatha's little Clank from the Girl Genius webcomic ( http://girlgeniusonline.com/ ). It has slightly posable arms and legs. The model's eye can be positioned to look in various directions. Finally, the winding knob on…
This is a support free Omni Wrench build. You can print it in color and pieces or just simply split in half version to get it done in 1 go. Glue required in both cases. Lazy version, no support :) Blue parts Black parts (brim reccomended)…
Clank Dashboard to organize your play area. Included are deck and card holders that connect to the dashboard. Additionally, they stack fit to hold cards for storage. The dashboard cover is optional and will be a way to keep all of the…
MAIN FEATURES -No lid lift -Individual player trays -Supports both vertical and horizontal storage -Fit following into 1 box: Clank! - Base game The Mummy's Curse Sunken Treasures Expeditions: Gold/Silk Expeditions: Temple of the Ape…
Took most of these from other inserts and modded them a bit. Goal was to store Clank Catacombs, Adventuring Party, Upper Management, and C team in one box. Whats included in the files: * A dungeon row card holder (print 2 copies), super…
Organize your cards and optimize your deck-building games! This 3D card holder is designed for deck-building games like Clank or Dune. It allows you to position your cards vertically, side by side, for better visibility and easy access.…
IF YOU LIKE THIS MODEL, CHECK OUT MY OTHER MODELS AND SUPPORT MY PAGE Patreon at https://www.patreon.com/pixelchronicles ! Ni No Kuni inspired, ClickityClank , Tabletop DnD miniature 25 mm medium base which can be used for DnD and other…
Was struggling with assembly of the lower body and legs. I combined them to one part and it printed quite nicely with tree support. Print Settings Printer Brand: Creality Printer: Ender 3 Pro Rafts: No Supports: Yes Resolution: .2 Infill:…
This is an organizer for the boardgame Clank! In! Space! I used the awesome design by mivinther ( https://www.thingiverse.com/thing:2732444 ) as a template for the player boxes, thanks for that!! The main idea was to keep the existing…
This is an organizer for the boardgame Clank in Space. It fits the base game, the Apocalypse expansion, and the Cyber Station 11 expansion. The design works with sleeved cards (I used perfect fit penny sleeves, if you are using premium…
I bought a used expansion with a couple of lost tokens, so I 3D printed the body and laser printed the image faces. The #D printed pieces were spot on, the laser printed stuff was not as good, I don't know if it was the paper or the…
This is the fully upgraded Blast Pistol from Ratchet and Clank Rift Apart. Ratchet and Clank is one of my favorite video game series and I knew I needed to make something from the latest game. Print Detail: Please see pictures below for…
So after printing Sven's Omniwrench I had to design some of the collectibles in the games to add to the Omniwrench. I'm in the process of making a stand for the Omniwrench too and will upload when its ready. I have provided the bolts in…
Some tokens for replacing exisitng tokens in Clank! Legacy. I've added sources in the list, but I cannot see them anywhere with this new design. My only design is the "Best employee" file, which function is only for bragging purposes on…
A cup based on ratchet and clank to put any kind of office supplies. On one side is the ratchet face and the other is the nefarious face made by using basic geometry.
also fits all additional credits from the pulsarcade expansion
For the record, this was my first attempt at making something like this and it shows. Files are all pretty self-descriptive, and I didn't really do anything specific with settings. If you do want to put this together for some god awful…
Tray for player tokens and cards. Designed for addition of Adventuring Party.
This is a cookie cutter based on the character Clank from the Playstation game Ratchet and Clank. This works as a cookie cutter and can be scaled up to your suited size. Print Settings Printer Brand: Creality Printer: Ender-3 V2 Neo…
I just made two tiny changes to NoahColly's original design. You will replace the two small spacers with a smaller one and an additional smaller card holder.
