Search results: coc

Cocoon Remote Stand - Two sizes

Prints with no Support Fits on Prusa Mini

Cocker spaniel

My friend's daughter likes cocker spaniels and he asked me to print one for her. I found one on thingiverse (https://www.thingiverse.com/thing:2859943), but it had some block between the legs so I decided to remove it in meshmixer. My…

Boa Hancock One Piece 3d Model Printable

"Boa Hancock, brought to life in a 3D printable statue/figurine. This rendition is an enhanced version of the previous model, where I've focused on fine-tuning the details and perfecting the pose. I'm excited to present the results of…

Micro Dice Tower (Blank, DnD, CoC)

A small (about UNO cards stack sized) dice tower with dice tray included. Both parts print without supports and use about 70 grams of filament. HIGH ROLLS GUARANTEED* The tower can fit a whole set of standard dice for storage. Put on the…

Coca cola bottle

Original Coke Bottle by DalekSupreme This bottle have i done bigger. Support : NO

Airbus A320 - Home Cockpit Knobs

Models of Airbus A320 Knobs for Home Cockpit build. Files with knobs for: Ecam Efis Knob 1 - with 3mm and 6mm hole Efis Knob 2 - with 3mm and 6mm hole Engine Master 1 Engine Master 2 FCU Knob 1 FCU Knob 2 FCU Knob 3 FCU Knob 4 Flaps Lower…

Sitting cockatiel

Sculpt is based off of my pet cockatiel when she fluffs herself up. File is scaled to be the actual size of a cockatiel, feel free to adjust the sizing if you wish. Print Settings Printer: Fusion 3 F410 Rafts: No Supports: Yes Resolution:…

Christmas CocaCola truck - printed in one piece without supports

[ENG] Simple model of a Christmas tractor with Coca Cola trailer. The model is available in two sizes: basic (16mm width), which should be printed in one piece and then the articulated joint can be gently disassembled (it is equipped with…

Six Pack - Coca-Cola - Print in place

This must be the most radical remix of the battery box - a coca cola six pack for drinking cans. The remix credit must go to the original from CAD-Guy, but the crate I have used is this version from Chong-McBong…

cockroach

cockroach

GarYon v4 - the ultimate Garmin mount for your Canyon aero cockpit

Update November 2024 NEW 10xx version: I added an elongated version of my GarYon v4 design to match larger bike computers. Durability experience: Until today I rode about 3500 km with the reinforced original design without any integrity…

Peacock miraculous Brooch MMU

The Peacock Miraculous is a brooch that, whenever Duusu inhabits it, transforms the wearer into a peacock-themed superhero with the power of Emotion. To activate the brooch, the user must speak the transformation phrase: "Spread My…

Coco, The Articulated Crocodile

Meet Coco, The Articulated Crocodile! A nice print-in-place gadget, Easy to print, available in one-color and bi-color versions (one filament change). Print suggestions & troubleshooting Brim is enabled but if you have excellent adhesion…

ficha coches de choques

Ficha creada con la siguiente configuración: Extrusor: 0.15mm Densidad: 20% Gasto: 2g-0.54m Tiempo: 12min

Cocktail Jigger

For those moments when the only thing missing for a great evening is a cocktail jigger. Just download, print and start mixing. I have printed the one in the picture with the default 0.2 Layer Height Profile. No support was needed. And if…

Multicolor Fuecoco 4 colors Pokémon

This print was done on a Bambu labs p1s using the following colors white, black, gold, red NOTE: this is not my model, the original maker of the model itself was made by printedobsession , I painted the colors for this model.

Roblox Grow a Garden Crops – 3D Print Set ( Tomato, Cocoa, Pepper, Apple, Mango )

Roblox Grow a Garden-inspired fruit & veggie set: tomato, cocoa, bell pepper, apple, mango

Coca Cola Keychain

Printed at 0.2mm layers, with red and white PLA, scaled at 25%.

90s Coca-Cola yoyo replica

A fully functional 90s coca-cola yoyo replica. Requires a M3x20mm bolt and nut. The 2 bases (white coloured parts) require VERY minimal support to print the inside. Assembly instructions video: Assembly instructions text: Use the "screw…

Burbaloni Loliloli - Coconut Capybara

Coconut Capybara – Burbaloni Loliloli edition! This adorable little creature is half coconut, half capybara, and 100% brainrot joy. Inspired by the Italian meme universe, this chill buddy is perfect for fans of the absurd and wholesome. ✅…

Aquarium Decoration - Textured Coconut Half

Custom Coconut shaped cave for fish, shrimp or reptiles. ~15cm X ~15cm X ~9cm. Designed with 2mm walls and meant to be printed with 100% infill and no supports; thin walls in design make the object unsuitable for significant re-sizing…

Cochlear Implant Model

A friend's young son has just had a cochlear implant put in, at their request, I designed and printed this model of the external components to be attached to a favourite teddy-bear to help B increase his confidence with this amazing…

Cocky Adventurer (Supportless, FDM friendly)

Sad remains.of a bold person. Suitable for 28mm tabletop games. Created so that it does not need any supports and prints well on a cheap FDM 3d printer like the Ender 3. Support me on Patreon , Cults3D and MyMiniFactory . Let me know how…

Coca Cola Santa Claus Cookie Cutter

Santa Claus cookie cutter made from drawing from the internet. Sharp edges and clear details.

Botella de Coca Cola

Modelo decorativo de Botella de CocaCola

Coca Cola Logo

Coca Cola logo in 3D. 5mm high.

Cockpit Set: Freewing F-18C Hornet 1/11th Scale Electric Ducted Fan Radio Control Jet

Cockpit Kit: Freewing Models R/C 90mm EDF F-18c Hornet This is a 1/11th scale cockpit kit designed for the 90mm EDF Freewing F-18C Hornet Fighter Jet. Included are the STL Files, a printed parts list, detail photos for painting, assembly…

Vintage Coca-Cola Button Sign 2 Color

Full Collection: https://www.printables.com/@TripleGWorkshop/collections/673389 ------------------------------------------------------ Color order: Red, White. Quick Guide to changing filament~ Have some paper to push away extruded…

Modular Cockpit Panel for Flight Simulation

A modular cockpit panel for my Flight Instruments. The 100x100mm modules can be stacked vertically and horizontally as desired. Connection is done by M3x6 screws, M3 threads are included in the model on top and right side. UPDATE…

TacoCat Taco Holder for Crussty's 50th Birthday

A special 50th Birthday TacoCat taco holder to honor 50 years of Crussty! Created to celebrate a very special person in the #D Printing Community on a very special birthday! Join in the celebration by posting your makes below, or on…

Universal Cockpit

An easy to print universal cockpit suitable for the F18 and upcoming models! Finally there for everybody that has waited to print it.

1/6th P51 Mustang Cockpit

This is the cockpit I built for a CARF Models P51 Mustang including the seat, left and right panels and the rear radio stack. It was built using a combination of FDM and RESIN 3D printed parts. The Exhaust stack and instrument panel will…

Coca Cola Logo (Simple)

Simple Coca Cola logo in 3D. 5mm high.

Hector from Coco

Hector from Coco

coca cola

élément de décoration

CocaCola to 10mm plastic tube adapter (CAD model included)

The adapter exists in 2 variations : the normal version which has the thread, the grips and the connection to the tube as well as the "cocacola bottle to 10mm plastic tube with rubber seal" on which the thread hole is slightly deeper so…

Elegant Peacock Statue

If you're interested in the commercial use of my models, earlier access, exclusive designs or if you simply like my work and want to support me, please check out my Patreon at https://patreon.com/29flo and subscribe to a membership tier…

Pokemon inspired, Fuecoco, Tabletop DnD miniature

IF YOU LIKE THIS MODEL, CHECK OUT MY OTHER MODELS AND SUPPORT MY PAGE Patreon at https://www.patreon.com/pixelchronicles ! Pokemon inspired, Fuecoco, Tabletop DnD miniature 20 mm small base which can be used for DnD and other Tabletops.

Cocodrile | Car Phone Holder

Crocodile has only two pieces and a simple joint, and gets hooked on the air conditioning outlet of your car. With this simple and compact gadget device, you will be able to locate yourself with your mobile while driving without taking…

Chococat (チョコキャット, Chokokyatto) from Hello kitty

Chococat (チョコキャット, Chokokyatto) from Hello kitty You will need to enlarge the model for an FDM printer. Support file is for a resin printer with all the supports, hollowed and drainage holes Category: Sculptures

Ford Coca Cola Model T year 1914 1:18 Designer Ed van der Heijden.

Supports: Yes Resolution: Dynamic Infill: 50% line Filament brand: 195 Filament material: PLA

Peacock

Was requested print print a cake topper for an event. The original model was too huge and required too much support/clean up. Decided to cut and scale. Printed the with supports everywhere and fuzzy skin. Added modifiers around the eyes…

Dwane "The Cock" Johnson

Coconut palm at the beach

Lovely beach with a realistic coconut palm tree. A coconut has dropped and is lying on the beach. Inspired by a real australian coconut tree. The trunc is wider at the bottom for maximum stability in the loose sand. Please find detailed…

Cockatiel

Version one is designed for single filament printers. Version two (MMU) is designed for multi material printers. Help support my design work by visiting my referral links: Upland referral (virtual property trading game):…

Sillcock keys

I recently moved into a new apartment and, unfortunately, the landlord didn’t provide me with a key for the water valves. I borrowed one from a neighbor and, after measuring it with a caliper (triangle 11mm), I started searching for a…

Adderini Cocking Arm Lever - Reinforcement

noticed that the cocking arm on the adderini gets a bit warped under strain... so I'm hoping this will help... time will tell. Also I think it adds a little more comfort and color. The screw holes line up nicely, just need a little longer…

Peafowl / Peacock (model tilted and split to minimize support)

I remixed the peacock here to try to make it easier to FDM print: https://www.thingiverse.com/thing:182242 I looked at how Cura was adding support with a 70% overhang and I saw that tilting the model about 10 degrees backwards would…

Eurofighter Cockpit 3D Printed

This is a 1/5 scale cockpit for an RC Eurofighter or Euro Sport Jet. The screens and heads up display are backlit by LED's. I will post a photo of the finished item installed in the plane soon. Instructions Print Paint and assemble.…

Tiny Cocktail Shaker

Tiny Shaker in 1/6 Scale for doll cocktail party. Printing from PLA, without supports, layer height 0.2 mm. + Ice Bucket with Lid, Tongs, Cutting Board, Cocktail Tray and Sticks I used mini glass beads for the drinks, and 3mm cube-shaped…

Airbus A320 Cockpit Microphone

Realistic model of Airbus A320 cockpit Microphone which mounts at rear of sidestick console. Print all body and mesh parts in black PLA, 100% infill for strength and solid feel. Model is split into parts so it can be printed without…

Fly trap for Coca-Cola bottle (remix)

The original model by Aaron Stalling : Fly trap for Coca-Cola bottle I printed this one on my Elegoo Mars 3 Pro (0.05 mm layer height) using Elegoo ABS-like “Smoky Black” resin and it fits a regular PET bottle very well. In my Tinkercad…

Coca cola logo

flat

RX-178 Gundam Mk-II Cockpit

My friend Jorge modeled this Gundam cockpit from a toy he found online. I reworked some of the geometry to better suit 3d printing, and he let me put it up here for the rest of y'all to enjoy. Try and position the parts as best you can, I…

LoCoClosure - Low Cost Enclosure for Sovol SV08

The original enclosure of SV08 is, in my opinion, a bit too expensive, or rather, it offers too little value for money. Therefore, I thought I would try my luck and design my own enclosure, which was created under the premise of minimal…

Peacock Statue

Peacock Statue

Swole Pikachu With Massive Cock

AAP01 Cocking Handle

Action Army AAP01 Cocking Handle Hardware needed: 2 x M3 x 8 Flat Head Hex Screw

Boa Hancock (One Piece)

This highly detailed 3D printable model represents Boa Hancock, one of the most iconic characters from the anime and manga One Piece. The figure is designed in a full-body pose, capturing her elegance, confidence, and distinctive beauty.…

BLUM cocealed hinge jig

UPDATE 03.01.2022: I've added a new jig, for other types of 35mm concealed hinges, at https://www.printables.com/model/184125-universal-35mm-concealed-hinge-jig I created this jig for 35mm BLUM concealed hinges. The hinges from other…

Adderini cocking lever reinforcement & grip

There are two versions are available: Large and small. I personally prefer the large version. Especially the large version creates a good grip and makes the handle more comfortable to use. You can use it as a handle while aiming /…

ficha coches de choque

ficha creada para los coches locos o coches de choque

Ant & Cockroach (Roach) Bait Station – Pet-Safe, Refillable, Reusable

This is a refillable insect bait station designed to attract and trap ants, cockroaches, and similar pests—while keeping pets and curious paws out. The low-profile entrance allows insects to easily access the bait, while the enclosed…

F-86 A-5 Sabre Korean War Era Fighter Jet (Cockpit Photo Included)

F-86 A-5 Sabre Korean War Era Fighter Jet

Botella de Fernet con Coca cortada

Botella de Coca cortada con Fernet. Print instructions Unassociated tags: botella cortada Category: 3D Printing Print Settings Printer Brand: Creality Printer: Ender 3 Rafts: No Supports: Yes Resolution: 0.12 Infill: 15% Filament:…

Airbus A320 Cockpit Microphone Holder - Captain's side

Realistic recreation of the Microphone holder at the rear of A320 Sidestick Cabinet. Designed for cabinet with 5 degree slope, but would work if top was flat. Print in black PLA, 100% infill for strength. Both a complete model and a…

Two-way Cover for Picocalc by Clockwork Pi

This is a snug-fitting cover for the picocalc that can cover the screen and keys when not in use, or be snapped into place in reverse, like a graphing calculator. Someone had already designed a cover for this thing, but it didn't snap…

Human Cochlea

Based on CT scan data, this is an actual size human cochlea (left ear).

Cocker Spaniel Glasses and Pen Holder

A lovely little Cocker Spaniel to hold your glasses and pens. I printed it with supports on build plate only. I also painted the eyes and nose shiny black.

PicoCalc back panel with USB port and back access

If you like my design maybe consider: https://buymeacoffee.com/ironatmmi Update: Improved antenna holder. Update: I have recognized that the boost converter is not necessary. You can directly connect the JST connector to the USB-A Port.…

Balolo Setup Cockpit Tablet Holder

MagSafe phone mount compatible with Balolo's Setup Cockpit , meant to mimic their $45 Tablet Holder

Flexi Peacock

The Flexi Peacock is a delightful model that showcases the capabilities of 3D printing technology to create moving parts without assembly. Perfect for both educational purposes and as a decorative item, it's designed to mimic the majestic…

Peacock

Peacock is an elegant decorative sculpture depicting a peacock with a fully spread tail, with an overall height of 112 mm. The model emphasizes detailed feather patterns and an open, fan-like structure that creates a strong visual…

Cockatiel – Paint-It-Yourself

A blank, matte-white model inspired by the cheerful and expressive cockatiel. This DIY collectible captures its playful crest and gentle energy in a smooth, minimal form—perfect for bright, creative painting and bird lovers alike.

Coca-Cola Bottle

This is a simple low-poly model of a Coca-Cola Bottle, you can use it as a penholder, as a toy or a replica. There are two versions, one hollow and one filled. For the real bottle size, scale up to %155.

Cup Holder - Fanatec Clubsport GT sim racing cockpit

This cupholder attaches to the 2-inch OD frame tubes and features options for both a 90mm and 100mm inner diameter holder with cutouts for mug handles. Stay hydrated with the beverage of your choice while enjoying the convenience of this…

Cute Cat with Cocktail/Drink Keychain

Easy to make a cute Cat with Cocktail/Drink keychain I printed in PLA Infill: 15% Layer Height: 0.20mm Supports: No If you like my work consider Buy me a coffee 😊

Cocoa Press 2.0 parts

The Cocoa Press 2.0 is the next evolution of chocolate 3D printing, offering enhanced features, precision, and ease of use. This DIY kit enables you to create intricate, edible chocolate designs with greater speed and control. These are…

Saraswati Dancing with Peacock

Saraswati (IAST: Sarasvatī) is the Hindu goddess of knowledge, music, art, speech, wisdom, and learning. She is generally shown to have four arms. The four hands hold items with symbolic meaning. The book she holds symbolizes the Vedas…

Balolo Magsafe holder for Setup Cockpit

Both a standard and a rugged version is available. I personally use the rugged version as the standard version flops around too much for my liking. Assembly instructions: Put double sided tape on the Magsafe puck or the part Stick both…

Cockroach splat! - Bookmark

Here is a super easy print, that takes less than an hour. It is optimized for 0.4 and 0.6mm nozzles and needs no supports. Print the small eyes with a brim, and cut it off after printing. The eyes must be glued on. You may want to use…

Base Plate Model (Easy Home Cockpit Project)

The instruments can be found under REMIX . Don't forget to like and comment. The concept is simple: Cut an instrument panel/dashboard/button box in any shape you want. Standard frames are also provided. Drill 60mm (2.4in) holes every 66mm…

Peacock napkin holder to print in 3d or laser cut

if you like this napkin holder look at my profile I have several you can print in 3d or cut with a laser good luck and enjoy the impression CUB SOCIOS: https://www.printables.com/@tecnoculebras#join:484 PATREON:…

Porta esponja cocina

Bandeja de esponja de cocina hecha para que escurra el agua. Print Settings Printer: Biqu B1 Rafts: No Supports: No Filament: GST PLA Notes: Puede imprimirse en forma vertical sobre el borde plano trasero. Category: Kitchen & Dining

DIY Bar - Cocktail Machine

🍸 http://MyBar.io 🍹 is an open source cocktail machine that will take your bar to the next level. The perfect cocktail, every time. Build yours!

PicoCalc stand

A little stand for the PicoCalc from Clockwork Pi. Prints without supports.

Halloween Cocktail Sticks

There are two versions of each design: one has the spike on the top and one on the bottom. (For useage on top or in the glass) The sticks are about 10 cm (~ 4 inch) long, let me know if you need a longer version. Print with 0.2 mm layer…

Can dispenser - Coca Cola

I couldn’t find a model that fit my fridge, so I modeled my own version of the can dispenser. I also wanted to add a little color. It can adapt to different type of can by replacing some elements. For the moment I could only test cans -…

bombardino cocodrilo

bombardino cocodrilo 3D MODEL

Coca Cola coaster set

I print it in PLA no supports need it multi color layer change 5 coasters will fit in the holder

Lego Compatible (27168.dat) Cockpit 4 x 2 x 3 with Pinhole, Ball Joints and Clips

This model is compatible with the lego system.

Margaritaville Frozen Concoction Maker Locking Base

A couple years ago for Father's Day my wife gifted me with the Margaritaville Frozen Concoction Maker Tahiti blender, ice shaver. It is reasonably powerful rubber-mated power blender with an overhead ice shaver. There are a couple…

Cocktail Shaker

Print with Petg The only part printed with supports is the shaker cap, the rest without supports Print Settings Rafts No Supports No Resolution 0.20mm Infill 30% Filament PETG

Throttle (Easy Home Cockpit Project)

Don't forget to like and comment. Remix of this excellent work by Vince_Prints and 4689rich. https://www.thingiverse.com/thing:4655661 https://www.thingiverse.com/thing:4655608 https://www.thingiverse.com/thing:4681559…

Moza wheel base to GT Omega ART Simulator Cockpit adapter

Adapter to mount Moza R9 wheel base to GT Omega ART Simulator.

Cocktail Glass Rim Salter

A tool to help salt the rims of cocktail glasses, this is especially useful for making margaritas. Features a screwtop lid, so salt can be permanently stored without spillage. As with all models designed to be used with food, I recommend…

RockCock (Rooster)

I took the Rock's head and put it on a rooster. Category: 3D Printing

Mouse platform - Fanatec Clubsport GT sim racing cockpit

This general use platform is perfect for holding a mouse and includes an added cubby for storing small items. Can be printed without supports.

English Cocker Spaniel (Sylvester)

The voronoi version can be printed without supports, the full and voxelized versions however will need support. Filaments: Primaselect Gold PLA, Primaselect Silver PLA and Fillamentum Chocolate Brown PLA. Update: now there's also a low…

Shuttlecock / Federball Badminton

Classic Shuttlecock for Badminton. Can be used as a keychain or trophy. Prints well with PLA (haven't tried anything else). Includes a “Trophy-stand” for 3 sizes, you can put a regular steel nut in the base as a weight.