P
PrintablesAurelio Righetti
Conductor's baton holder cap
Tappo per porta bacchetta direttore d'orchestra
- Downloads
- 25
- Likes
- 0
- Rating
- 0
Search results: conductor
67 models
P
PrintablesAudiotec Fischer GmbH
HELIX Conductor Universal Mount
The printed part can be used both as a holder for presentation and for mounting in the car. The HELIX CONDUCTOR fits directly into the cutout by clamping. No support structures are required and for use in the car only ASA or similar…
- Downloads
- 656
- Likes
- 16
- Rating
- 0
P
PrintablesHelmut Lord
nRF52840 Helmet - Case for the Nordic Semiconductor nRF52840-DK
A compact, 3D-printable case designed to snugly fit the nRF52840 devkit.
- Downloads
- 253
- Likes
- 10
- Rating
- 4.5
P
PrintablesHelmut Lord
nRF54L15 Helmet - Case for the Nordic Semiconductor nRF54L15-DK
A compact, 3D-printable case designed to snugly fit the nRF54L15 devkit.
- Downloads
- 218
- Likes
- 9
- Rating
- 5
P
PrintablesAudiotec Fischer GmbH
Helix Conductor Stand
The holder can be printed from any material. No supports are necessary when the model is placed on the build plate with the foot facing down. A layer height of approx. 0.15mm is recommended.
- Downloads
- 190
- Likes
- 3
- Rating
- 0
P
Printables3D WILLIE
conductor helicoidal
utilizado para transmitir movimiento entre ejes.
- Downloads
- 138
- Likes
- 6
- Rating
- 0
P
Printablestv_walkman
JST XH Sleeve (2 Conductors)
Locks well with 4 tabs, but a dab of hot glue inside sleeve can be used as strain relief and more permanent fixation. Original file didn't have a 2-conductor version. Pulled from the source's FreeCAD file and cleaned up tolerances. All…
- Downloads
- 131
- Likes
- 26
- Rating
- 5
P
PrintablesAudiotec Fischer GmbH
Helix Conductor VW T6.1 Cup Holder Bracket
The model prints without any support, the layer height should be set to ruffly 0,15mm. We highly recommed to use a material, which withstands high temperatures, such as ASA or ABS.
- Downloads
- 123
- Likes
- 5
- Rating
- 0
P
PrintablesSerhii Muravskyi
conductor for drywall
печать из материала ABS или PETG @сопло 0,4 мм you will need 2 bolts and 2 nuts, which are best soldered
- Downloads
- 118
- Likes
- 18
- Rating
- 0
P
PrintablesAlexeyvik
Conductor for 18mm panels remix by voltNik
Conductor for 18mm panels remix by voltNik Ремикс кондуктора от voltNik'a для панелей 18 Remix from https://www.thingiverse.com/thing:5228089
- Downloads
- 96
- Likes
- 24
- Rating
- 5
P
PrintablesAudiotec Fischer GmbH
Helix Conductor Mercedes W206 Cup Holder Bracket
The model prints without any support, the layer height should be set to ruffly 0,15mm. We highly recommed to use a material, which withstands high temperatures, such as ASA or ABS.
- Downloads
- 94
- Likes
- 3
- Rating
- 0
P
PrintablesAlexander Mikhaylov
Conductor for profile pipe
Conductor for profile pipe angle 45 degrees - 40x20, 40x40, 60x30, 60x60 Кондуктор для профильной трубы под 45 градусовю PTEG Infill 25%, 3 Walls
- Downloads
- 88
- Likes
- 12
- Rating
- 0
P
PrintablesAudiotec Fischer GmbH
Helix Conductor Audi A4 B8 Cup Holder Bracket
The model prints with support, the layer height should be set to ruffly 0,15mm. We highly recommed to use a material, which withstands high temperatures, such as ASA or ABS.
- Downloads
- 84
- Likes
- 7
- Rating
- 0
P
PrintablesAudiotec Fischer GmbH
Helix Conductor Mini R59 Cup Holder Bracket
The model prints without any support, the layer height should be set to ruffly 0,15mm. We highly recommed to use a material, which withstands high temperatures, such as ASA or ABS.
- Downloads
- 76
- Likes
- 2
- Rating
- 0
P
PrintablesМаксим Сергеевич
Furniture conductor 16mm
Furniture conductor with bearing 625 2RS for drill bit 5 mm
- Downloads
- 72
- Likes
- 12
- Rating
- 0
P
PrintablesMissLaneyLuck
Kingdom Key Keyblade - Conductor Baton
I missed out on buying the conductor baton from the KH Orchestra so I made my own! I was able to print it split horizontally on a Taz 6 (see below) I just extended the middle and key (teeth?) area of this model:…
- Downloads
- 66
- Likes
- 7
- Rating
- 0
P
PrintablesAksup
Nordic Semiconductor nRF9160 DK Tray
Tray for Nordic Semiconductor nRF9160
- Downloads
- 59
- Likes
- 2
- Rating
- 5
P
PrintablesHelmut Lord
nRF7002 Helmet - Case for the Nordic Semiconductor nRF7002-DK
A compact, 3D-printable case designed to snugly fit the nRF7002 devkit.
- Downloads
- 59
- Likes
- 6
- Rating
- 0
P
PrintablesAudiotec Fischer GmbH
Helix Conductor Skoda Karoq Cup Holder Bracket
The model prints without any support, the layer height should be set to ruffly 0.15mm. We highly recommed to use a material, which withstands high temperatures, such as ASA or ABS. On the bottom is some space for cables.
- Downloads
- 55
- Likes
- 4
- Rating
- 0
P
PrintablesNakah
Tesla Model 3 Helix Conductor mount
This is a custom mount that I made for Helix DSP conductor mount that will fit in perfectly in this storage box : https://fr.aliexpress.com/item/1005001926331448.html?spm=a2g0o.order_list.order_list_main.10.21ef5e5bM48GOV I've also added…
- Downloads
- 47
- Likes
- 5
- Rating
- 0
P
PrintablesAudiotec Fischer GmbH
Audiotec Fischer CONDUCTOR PRO stand
The holder can be printed from any material. No supports are necessary when the model is placed on the build plate with the foot facing down. A layer height of approx. 0.15mm is recommended.
- Downloads
- 39
- Likes
- 1
- Rating
- 0
P
PrintablesDarkextratoasty
Rugged Case for Nordic Semiconductor Power Profiler Kit II PPK2
This is a rugged case for the Nordic Semiconductor Power Profiler Kit II. It holds the PPK2, two micro USB cables, the breakout jumper wires that come with the kit, and some extra jumper wires and probe clips. Below the PPK2 is a cavity…
- Downloads
- 38
- Likes
- 3
- Rating
- 0
P
PrintablesTimofey Titovets
Eva 3 V6 Vulcano to Rapido conductor & adapter
Conductor to make a holes in V6 heat sink (M3) Updated Eva head for V6 cutted + Vulcano
- Downloads
- 37
- Likes
- 8
- Rating
- 0
P
PrintablesJames Turper
Conductor's Baton
This is my first draft of a conductor's baton. The model is divided into 3 parts, which have pegs to reinforce the adhesive you choose to use to glue the pieces together.
- Downloads
- 35
- Likes
- 2
- Rating
- 0
P
PrintablesArnoud Whizzbizz
Stone for mounting a semiconductor laser
15x15x15 stone with 9mm or 13mm hole for mounting a semiconductor laser. A holder for a two-pole JST-PH connector is provided on the side. The laser can then be connected with flexible two-wire wiring.
- Downloads
- 31
- Likes
- 4
- Rating
- 0
P
Printablesplasmata
Nordic Semiconductor nRF51-DK case
A simple case for the Nordic Semiconductor nRF51-DK development board. There are openings in the 3 of the case sides for wire routing to connect externals as well as USB. Category: Electronics
- Downloads
- 30
- Likes
- 2
- Rating
- 0
P
PrintablesSteedMaker
Superconductor
This design is called a superconductor because it looks like something that might transform energy. It is designed to be printed without supports. Please "Like" this file, if you collect or download it. Category: Sculptures
- Downloads
- 21
- Likes
- 7
- Rating
- 0
P
PrintablesDrLoveWizard
LK99 Superconductor
Tired of waiting for peer-reviewed papers? Reproduce LK99 today! Printed as two separate pieces and applied a tiny amount of glue (shhh) to the LK99.
- Downloads
- 21
- Likes
- 6
- Rating
- 5
P
PrintablesMikko Manninen
Nordic Semiconductor nRF9160DK tray remix
With MK3S+ with 0.6mm nozzle orginal & this remix model prints OK without added support, but it won't do any harm to add those either. Lid addon part, which can used to add additional color & close top part holes, can be pressed to lid…
- Downloads
- 19
- Likes
- 4
- Rating
- 0
P
PrintablesLudi
Gummifuß für Leitertraverse 50x22mm / Rubber foot for conductor travers 50x22mm
Ersatzgummi Fuß für die Traverse einer Stehleiter, der untere Teil ist für mehr Stabilität mit 50% Infill gedruckt, Filament Flex 92a Replacement rubber foot for the traverse of a standing ladder, the lower part is printed for more…
- Downloads
- 19
- Likes
- 1
- Rating
- 0
P
PrintablesLiquid96
Helix conductor mount subaru outback 5th gen
Should be a press fit. I suggest drilling the hole for the cable on the flat portion at the bottom a typical size so later you can use a standard plastic plug to undo all this.
- Downloads
- 18
- Likes
- 0
- Rating
- 0
P
PrintablesBuas7
Enclosure filament conductor
So this a thicker conductor so you can mount Bowden coupling and guide you filament through ptfe tube Category: 3D Printing
- Downloads
- 18
- Likes
- 1
- Rating
- 0
P
PrintablesAnubis X
ALIGNMENT TOOL FOR SECTOR CONDUCTOR CABLES
Print Settings Rafts: No Supports: No Resolution: 0.15 Infill: 35% Filament material: PLA+
- Downloads
- 15
- Likes
- 2
- Rating
- 0
P
PrintablesSNAFU_3D
Goofy Train Conductor
Wife wanted an image of Goofy as the train conductor for a Disney hat she is making. Found an image, converted to .svg file using Inkscape, and created a 3d .stl file in Tinkercad.
- Downloads
- 14
- Likes
- 7
- Rating
- 5
P
Printableslbarbisch
Semiconductor graveyard
A container to collect all the victims of your mistakes.
- Downloads
- 13
- Likes
- 2
- Rating
- 0
P
Printablesftobler
Semiconductor Graveyard
Safely dispose your collectibles after the magic smoke is used up.
- Downloads
- 13
- Likes
- 4
- Rating
- 0
P
PrintablesTheatreGodAV
Single Box With Cover For Wire Connectors Push-in Conductor Terminal Block (2 in 4 Out)
Single Box With Cover For Wire Connectors Push-in Conductor Terminal Block (2 in 4 Out)
- Downloads
- 12
- Likes
- 4
- Rating
- 0
P
PrintablesStanley Fu
Limelight Semiconductor Cooler Holder
Onshape: https://cad.onshape.com/documents/7edeb35b745dab8b7d455709/w/4fec87d891128a727249f84e/e/6f9047b3a915958941e36436?renderMode=0&uiState=696ab8a41c7efa5c7b6ba328
- Downloads
- 11
- Likes
- 0
- Rating
- 0
P
PrintablesAksup
Nordic Semiconductors nRF9160 Goboard tray
Nordic Semiconductors nRF9160 Goboard tray
- Downloads
- 11
- Likes
- 1
- Rating
- 0
P
PrintablesEric BEAUGUITTE
High Voltage Submarine Cable - Copper Conductor - Double Armouring
For the Part#1 and Part#2, you need to have a large plate. I have printed them with my CR10 V2. I have indicated the different diameter for those parts. Assembly part: Part#1_Socle (286mm diam) Part#2_Yarn (Black color). I have used Matte…
- Downloads
- 10
- Likes
- 3
- Rating
- 0
P
PrintablesEric BEAUGUITTE
High Voltage Submarine Cable - Aluminium Conductor
For the Part#1, you need to have a large plate. I have printed them with my CR10 V2. Assembly part: Part#1_Socle (257mm diam) Part#2_Yarn (Black color). I have used Matte PLA Part#3_Yarn (Yellow Color) Part#4_Complete Armour (Silver and…
- Downloads
- 9
- Likes
- 5
- Rating
- 0
P
PrintablesMrNik17
Lightning conductor marker 1-16
Use this to mark your lightning conductors. Print in PETG is recommended.
- Downloads
- 9
- Likes
- 1
- Rating
- 0
P
PrintablesPetr Cach
Train conductor mini baton
A simple mini baton model for little train enthusiasts. This is printed as a multicolor print without MMU. This technique uses virtual extruders to print different colors on the same layer. The gcode to switch extruders and change…
- Downloads
- 7
- Likes
- 1
- Rating
- 0
P
PrintablesMarius Beyer
Silicon Doping Teaching Model – P-Type and N-Type Semiconductor Demonstration
This 3D printable educational model demonstrates the basic principle of semiconductor doping using a physical, hands-on approach. The model consists of a base plate with recesses for individual atom pieces. Silicon atoms are represented…
- Downloads
- 7
- Likes
- 3
- Rating
- 0
P
PrintablesPol Càliz Funes
conductor de filamento para impresora
conductor de filamento para impresora
- Downloads
- 6
- Likes
- 1
- Rating
- 0
P
PrintablesPete
P1/P3 Hardline Cable Center Conductor Gauge
Use to tell the difference between P1 and P3 cable. 500, 750, and 1000 cable sizes. Based on old metal gauge. +/- 0.02mm tolerance. P1 cables have a slightly smaller center conductor than P3 cables, leading to opens/shorts in the cable…
- Downloads
- 6
- Likes
- 1
- Rating
- 0
P
PrintablesSergii Andriichuk
ELRS Recovery conductor V2
Requires a few m2 bolts to connect two parts.
- Downloads
- 4
- Likes
- 0
- Rating
- 0
P
Printablesgrumpy_scrambler
Helix Conductor / FiiO Cup Holder Bracket/ Insert
This is a cup holder insert designed to fit a BMW G26 cup holder. It may also fit other BMW models. It consists of a mount for the Helix Audio Conductor Pro and a charging dock for the FiiO M33 DAP. Other FiiO players with two USB-C ports…
- Downloads
- 4
- Likes
- 2
- Rating
- 0
P
PrintablesKing Kalu (卢卡)
5" Semiconductor Wafer Display Frame
Here is a 5" Semiconductor frame I designed to house one of my semiconductor Wafers that was produced at my local legacy fab before it permanently closed. I did not design this one for acrylic like I technically should have. Includes an…
- Downloads
- 2
- Likes
- 0
- Rating
- 0
P
PrintablesSergii Andriichuk
ELRS Recovery conductor
Guide for mounting an ELRS recovery receiver module.
- Downloads
- 1
- Likes
- 0
- Rating
- 0
P
PrintablesShyavanS
E-Beam Evaporation Semiconductor Sample Jig
A jig for holding semiconductor wafer samples undergoing contact deposition via E-Beam evaporation. It holds square samples up to 8 mm in side length and 0.8 mm in thickness (if using samples slightly smaller than that, it would need to…
- Downloads
- 0
- Likes
- 0
- Rating
- 0
P
Printables
conductor for drywall
печать из материала ABS или PETG @сопло 0,4 мм you will need 2 bolts and 2 nuts, which are best soldered
P
Printables
Conductor's Baton
This is my first draft of a conductor's baton. The model is divided into 3 parts, which have pegs to reinforce the adhesive you choose to use to glue the pieces together.
P
Printables
High Voltage Submarine Cable - Copper Conductor - Double Armouring
For the Part#1 and Part#2, you need to have a large plate. I have printed them with my CR10 V2. I have indicated the different diameter for those parts. Assembly part: Part#1_Socle (286mm diam) Part#2_Yarn (Black color). I have used Matte…
P
Printables
High Voltage Submarine Cable - Aluminium Conductor
For the Part#1, you need to have a large plate. I have printed them with my CR10 V2. Assembly part: Part#1_Socle (257mm diam) Part#2_Yarn (Black color). I have used Matte PLA Part#3_Yarn (Yellow Color) Part#4_Complete Armour (Silver and…
P
Printables
Helix conductor mount subaru outback 5th gen
Should be a press fit. I suggest drilling the hole for the cable on the flat portion at the bottom a typical size so later you can use a standard plastic plug to undo all this.
P
Printables
Audiotec Fischer CONDUCTOR PRO stand
The holder can be printed from any material. No supports are necessary when the model is placed on the build plate with the foot facing down. A layer height of approx. 0.15mm is recommended.
P
Printables
Conductor for profile pipe
Conductor for profile pipe angle 45 degrees - 40x20, 40x40, 60x30, 60x60 Кондуктор для профильной трубы под 45 градусовю PTEG Infill 25%, 3 Walls
P
PrintablesDomochevsky
Conductor's Revolver v1.2
The CONDUCTOR'S REVOLVER, as it is coloquially named for lack of an official title, is another blaster in a cyber-future where german trains must run on time, no matter what. It is a low-tech sidearm that has spread since the beginning of…
- Likes
- 12
- Rating
- 0