Counting matching models…
Also try my new version with increased scrap capture ability: added fins! A small container to clean the (kitchen) counter. I use it mainly for vegetable scraps to throw in the composting bin later. It can be used to throw your peels in…
This is a wall-mounted trash can to put your leftover filament in or to collect other waste. The easy-to-use hanging system allows it to be placed on horizontal and vertical cement joint lines. This trash can has a capacity of 10 cm deep…
A convenient receptacle capable of trapping and containing pesky purge lines, skirts, ooze or other printing scrap. If you have been printing for a while, you know that those scraps--especially skirt loops--hate to be contained in small…
You can use this waste bin for convenient stripping of paper, vinyl and other remainders for your tools weeding your plotted designs. The bottom of the lid has three small pockets for (optionally) entering neodym magnets (5*3mm) to fix…
This is a mount for the 45° filament cutter found here . It fits over any 2020 extrusion and is easily mounted with 2x 8mm M3 screws and T-nuts (I used these ). I've also added a collection drawer to hold the scraps (I'm including 2…
The small debris which my printer creates was getting out of hand. I normally dyson out my enclosure after a print to clean up the scraps, but thought a small bucket may be a simpler solution. I designed this to stick on the side of the…
I wanted a box to hold all of the scraps and wasted filament that comes from my 3d printer. so I made one!
Four small food scraps container bag clip hold the bio degradable bag securely in place until you are ready to transfer the bag to the green bin. Supports NONE Brim Yes but optional I printed mine in PLA at 0.15
If you're anything like me, your garbage/rubbish bin for filament scraps is crap -- I just wanted to be able to somewhat quickly "swipe it" out of the way when it was on the table. This has already undergone 2 revisions before it was even…
The CrapStack in modeled after other lightbox concepts for trading cards. Set your card on the pedestal and your phone on the holder at the top and shoot away. This print is in no way perfect and I am hoping people will fix, mod, and…
A trash bin to keep around the mini (or other printer) for the waste that comes of a print - be it skirts, brim, supports or even failed prints. Designed to test the vertical height of the mini and spiral vase mode - give it a try and you…
I made this on tinkerkad to store tools and 3d print scraps.
The Bin Mount locates the Bin in a perfect position close to the Purge Line . You can connect the Bin Mount using the additional printed floating nuts and add M3x10 thread-forming screws. If you have any other floating nuts you can use…
The Scrapshield Guard is a brutal line breaker and living bulwark of the Ashmaw Clans , clad in layered scavenged armor and advancing behind an enormous slab-built shield. With a heavy cleaver in one hand and a towering barricade of…
Figure size: 13 x 59 x 33 mm Use your own stand or a pre-made stand in my models Supports are necessary Illustrative pictures Possible re-make for your own, non-commercial purposes My private AI model without textures is available for you…
a box for plastic scraps 200 x200x200mm The wall thickness is 2mm
A small sized bowl with 2cm height and 6.836 cm in width 4.99 grams of filament on a Prusa mk4 print time is 34 minutes. settings don't matter. I printed in transparent PLA filament. it is sturdy and will not break. If you are using a…
A standard size 3 in. puck for casino game Craps. Has small notch on back to line it up, then just glue the 2 pieces together.
-simple cat toy, -great for using up all your spools with only a little left. -prints in 2 halves -each ball half only requires around 6g ! -prints in 2 halves and is glued together with super glue. -40mm diameter(ping pong ball size)…
long bin for filament scraps left on 3d model and on plate
This allows you to print the platform inside by itself, It save print time by not having a ton of supports. I prefer to keep an eye on my prints so I am able to better watch this one
A small (95mm X 50mm) Dice boat for Craps or other games that involve dice. I added a little drainage hole so that if any dust or liquids gets into it they can be removed easily. Have Fun :)
A simple and stable scrap bin for everyday 3D printing waste. This is a small container designed for collecting filament scraps, purge lines, skirts, brims, support material, failed print fragments, and other small leftovers from 3D…
A simple useful strainer for seperating food scraps for sinks that don't have a garbage disposal and want a way to seperate the junk from things that could go down the drain. PETG standing upright, with organic supports. Reccommended to…
This mini spool roller is designed for those leftover lengths of filament that are too valuable to throw away. It provides a neat and functional way to store and feed these scraps, ensuring they are ready for use whenever a small project…
I made a little counterweight gadget because the filament tends to form long, stringy strands in the original setup. It requires an M4 screw for counterweight adjustment; I printed it using PETG. There are two catch options: one allows…
The R7 Purpose Shadowbox | Give Your Scraps a Purpose Every maker has a pile of purged lines and filament "poops" that usually end up in the trash. I designed this shadowbox to change that—giving your scrap filament a literal purpose…
Introducing the Collar Crapsule! This design is meant to have a low profile, no moving parts and can hold (1) -or- (2) individual dog poop bags right on your dogs collar! Print without supports! Designed for large breed dog. This is…
Print in upright orientation, does not need support. Parameterized Fusion file also included to change tolerances, dice count, and other options.
The R7 Purpose Shadowbox | Give Your Scraps a Purpose Every maker has a pile of purged lines and filament "poops" that usually end up in the trash. I designed this shadowbox to change that—giving your scrap filament a literal purpose…
The CrapStack in modeled after other lightbox concepts for trading cards. Set your card on the pedestal and your phone on the holder at the top and shoot away. This print is in no way perfect and I am hoping people will fix, mod, and…
a box for plastic scraps 200 x200x200mm The wall thickness is 2mm
Print in upright orientation, does not need support. Parameterized Fusion file also included to change tolerances, dice count, and other options.
