307 models
No more scattered pencils! This practical and stylish box is designed to safely store up to 24 colored pencils or pens with a length of approximately 175 mm and a diameter of up to 8 mm . Perfect for students, artists, and creative souls.…
Print approx. €2.52–€3.08 excl. taxPreliminary estimate for one variant
This 3D designed model is specifically created to hold a pack of 100 count Crayola Super Tips Markers. It features a compact and sturdy design, with enough space to store and organize the markers in an efficient manner. Whether you're an…
Print approx. €25.88–€31.63 excl. taxPreliminary estimate for PETGSource material: PET
A simple crayon container for children to keep their crayons safe! Hello! I'm a teacher, and I designed this crayon container because my students needed a way to organize their crayons. I wanted to create something fun so they would love…
Print approx. €4.51–€5.52 excl. taxPreliminary estimate for one variant
I designed this to replace a worn-out cardboard crayon box, at my wife's request. It's internally ribbed to keep each crayon in its own slot as opposed to falling over into adjacent slots. The crayons around our house fit loosely enough,…
Print approx. €0.93–€1.13 excl. taxPreliminary estimate for one variant
I couldn't find a crayon or pencil extender for my kids' crayon scraps. The commercial ones were either too expensive or too difficult for kids to handle. So I designed one myself. Advantages : Easy and fast crayon change. Optimized for…
Print approx. €0.16–€0.20 excl. taxPreliminary estimate for one variant
Crayon box with 7 separate compartment. Print instructions Print with 0.2mm layer height. The g-cord file meant to print with no MMU, because I don't have a MMU.
Print approx. €13.37–€16.35 excl. taxPreliminary estimate for one variant
“Can I have a new pen for my Promethean board, I've lost my old one”. Ah, the usual weekly service ticket; another lost pen which needs to be replaced. Why not replace it with something relatively quick to print, cheaper than the…
Print approx. €0.41–€0.50 excl. taxPreliminary estimate for PETGSource material: PET
82mm diamètre intérieur 135mm de hauteur 3mm d’épaisseur n'hesitez pas à aimer et poster vos makes 82mm inside diameter 135mm height 3mm thickness do not hesitate to like and post your makes
Print approx. €10.01–€12.24 excl. taxPreliminary estimate for one variant
Porte-crayon original design ✅Rangement ordré de stylos, crayons, stylos indélébiles, gomme etc… ✅Prévu pour la pose d'antiglisse de 8mm au dessous Imprimante: Bambulab X1C, Buse 0,4 , temps d'impression 4h41. ✅si tu veux ton nom devant…
Print approx. €5.96–€7.28 excl. taxPreliminary estimate for one variant
A fun way to recycle those old and broken crayons you've got stuffed in some bin. Each train needs a bit less than 1.4 inches of crayon (standard diameter) - not counting what stays in the melting pot or cup. Prep: Print both halves (STLs…
Print approx. €1.23–€1.51 excl. taxPreliminary estimate for PETGSource material: PET
This box holds up to 48 crayons and 50 Crayola Super Tips markers with an extra bin for miscellaneous stuff. The six crayon inserts make it easier to retrieve short crayons without tipping over the entire box. Although I designed the…
Print approx. €8.30–€10.15 excl. taxPreliminary estimate for one variant
Rainbow crayons and pencils organizer for kids
Print approx. €9.12–€11.15 excl. taxPreliminary estimate for one variant
Needed a simple organizer for my kids marker and crayon sets. Printed a box with no top layer and sized infill to fit regular Crayola crayons. Came out great in Rainbow Silk PLA! Recommended print settings: 2 perimeters (0.5 width) No top…
Print approx. €1.60–€1.96 excl. taxPreliminary estimate for one variant
A sleek, modern geometric pen holder designed to keep your desk organized while adding a stylish, contemporary touch to your workspace. This model is available in two diameter sizes (both feature a 100 mm / 3.94 inches height): 50 mm…
Print approx. €1.98–€2.42 excl. taxPreliminary estimate for one variant
Crayon hedgehog. Put the crayons in the holes and make the hedgehog spines. Original size of the hedgehog is for thick crayons, if you have standard thin ones you can scale down the model about 20-30%
To open the case more easily, squeeze above the cutouts on each side! Consider subscribing to support to our YouTube channel to support us!
I wanted a pencil crayon case with flip up holders like you'd see on a case made for drill bits. The whole case prints in place. It can hold 24 pencil crayons. This is my first draft, and it could use a bit of refinement. One thing I'd…
I made this mold for the Crayola Crayon maker from 2001 that my wife had. The original mold had completely deteriorated and replacements aren't available from what I could find. No mold release was needed for the most part as long as the…
Designed this pot because all the other vase-mode ones I printed kept breaking. It works particularly well with satin and shiny filaments and still prints reliably if you tweak the scale. If you’d like to support my work, leaving a ♡ like…
A variation of my [Art Pencil Holder](https://www.prusaprinters.org/prints/63392-art-pencil-holder) for crayons. This model is inspired by this very sleek design , but I redeigned it from scratch in Fusion 360. I wanted a base and a lid…
Pot à crayons composé de 4 éléments : 1 corps et 3 inserts. Aucun support n'est necessaire ------------------------------------------------------------------------ Pencil holder composed of 4 elements: 1 body and 3 inserts. No support is…
Pot à crayon - Porte Crayon Black Pink
bonjour j'ai modelisé un pot en crayon en forme de tonneau simple mais sympas il est imprimable avec juste un petit support pour le bouchon dimension 110mn en hauteur et 80mn de diamentre je vous inclue un fichier fusion 360 si vous…
It came to me once in an exam: what if I could eat crayons without eating crayons . Then it hit me: white chocolate crayons with food colouring . An idea so good, it was edible. Immediately I went out to buy several packs of crayons, the…
EN Updated 27/03/2025: Modification of ‘CPF-BASIC’, ‘CPF-CG’, and ‘CPF-CD’ to add a foot for horizontal use. Addition of ‘CPF-Pied Storage box for 72 markers, pens, pencils, etc. Square slot, 1.5 cm square, with 6 rows of 12 slots. Parts…
Here I offer you to download a simple but nice crayon holder. Layer height: 0.2 support: no material: PLA, PETG To change the color of model B to black, select layer 284 at a layer height of 0.2. Model A and B need to be glued with…
Based off the Gridfinity design by Zach Freedman, this stackable tray was designed to hold 25, 8mm x 180mm pencil crayons. It is way overkill, but it works really well. It also makes using them easier as they can be laid out and clearly…
My first project to learn Fusion 360. Got it right after 3 printings. Print Settings Printer Brand: Creality Printer: Ender 3 Rafts: No Supports: No Resolution: 0.2 Infill: 100% Filament: [ Labists PLA…
A simple pencil box (a little flexible). Un simple pot à crayon (légèrement souple) Category: Office
A portable travel case to carry and protect an 8 pack of crayons and an A7 sized notebook with a built-in crayon sharpener. This model should be fine in either PET or PLA plastics. No supports needed. Note : Pay attention to the…
This marker holder can be put together by attaching the side pieces to the top and bottom. You may glue it together for extra support. This holder fits the larger crayola size but can also be used for smaller markers such as sharpies.
Remix of Multi-Use Case to be taller to hold 22 crayons
Un simple pot a crayon lapin crétin.
I made this for a younger family member of mine who loves dinosaurs and loves to color! The crayons don't quite fit right on the tail, but it works. Print it flat on it's side, and I would recommend supports. If you have good support…
This model has a 4 tier circular stepped design of 11mm diameter tubes with an internal 10mm diameter lip 'catch'. Designed for my daughter to keep her markers from ending up all over the house. Note: CAD was designed in Catia so a…
Organize your workspace with this compact, cascading 4-tier pencil and crayon box! Designed with both aesthetics and ergonomics in mind, this cantilever-style box holds up to 48 pencils (12 per tray) and expands smoothly to give you a…
This simple desktop puzzle can be printed in various colors or as a single unit. This may take some mental work to figure out how it works for the first time, but once you know how it goes together, you will frustrate your friends at how…
Two sizes of crayon-shaped containers for things like pencils, pens, markers, or anything else you need a container for (like crayons, of course). The smaller container is perfectly sized to fit in a backpack. Both large and small…
A small charm with a handle loop for mounting. An easy build that requires minor gluing. Best printed using resin in batches. There is usually a little spoilage in removal when you print this small. Use 1 or maybe 2 sprues per piece.…
Remix d'un pot à crayon qui reprends l'aspect couche par couche. Le remix n'est pas d'ici, j'ai refait le pot plus haut pour mieux ranger les crayons. Pas de support pour le pot, mais pour la buse à imprimer à l'horizontale avec support.
My wife picked up vintage “fashion plates” set, but alas it didn't have the crayon holder to make the rubbings. This crayon holder is based on a standard crayola crayon and some measurements from another set. Printed vertically with a…
Printed on Prusa Mk4 with white PLA.
bonjour je vous presente ce petit pot a crayon il as la forme du celebre tuyau dans mario vous pouvez y mettre des crayons ou meme vous en servir de cache pot pour un petit cactus il mesure 100mn de diametre et 120mn de hauteur imprimer…
These are caps for crayons, specifically designed around Crayola crayons, with English text on on them as well as braille for reading by those with visual impairments, such as degenerative blindness, colorblindness, etc. where they may be…
A friend asked if I could print a crayon with a bite in it. I looked all over the internet and couldn't fine anything I liked, as most are crayon related not a crayon in itself. I designed this desk art and used Onshape so publicly…
Remix of @HellfireHD_125784's model. Based off the Gridfinity design by Zach Freedman, this stackable tray was designed to hold 18 8mm x 180mm pencils. Part size: 210x167.5 It uses 6x2mm magnets as per Gridfinity design. I recommend…
Simple Remix from directly within PrusaSlicer, cut and scaled to fit Crayola Large Crayons, then used the Emboss Feature to further personalize it for my Daughter.
Comment réaliser un pot à crayon graphique, imprimable en mode vase, inspiré de la forme du dodécaèdre? Voilà! Paramètres d’impression 3D Pot à crayons dodécaèdre: taille 105x109x90 mm paramètres d'impression: Activer le mode vase Taille…
Pot à crayon l'effigie du plus grand des pirates!
This is a simple mold to allow people to make their own sidewalk chalk crayons. It is inspired by the Bloxen, Sidewalk Chalk Mold 'thing'. My boys used to use this stuff on our driveway all the time and they loved it! Instructions Print,…
pot a fleur qui peut aussi servir de porte crayon
pot a crayon dans le style futuriste et épurée avec des frome de losange sur l'ensemble du pot se qui le rend très esthétique.
Un pot à crayons issu du texturage perle. Ici les 'perles' ont été réduites par rapport au précédent pot à crayons. Vous avez le choix entre deux modèles ici: - le premier pot à crayon est uniforme - Sur le deuxième, à mi-hauteur j'ai…
Složeno ze dvou dílů (doporučuji slepit). Můžete kombinovat různé výšky dílů. (například bottom45 a top25). Pro tlustší pastelky (předměty) zvětšete měřítko při tisku v ose X a Y.
Designed to be quick and easy; uses about 1g of filament and can be printed in vase mode in about 10 minutes. Personal settings: 0.4mm nozzle with 0.6mm line width 0.32 line height 1 concentric bottom layer
Le pot à crayon transportable avec une hanse est un accessoire pratique et compact, conçu pour ranger et transporter facilement des fournitures de bureau. Ce pot à crayon est divisé en six compartiments égaux, chacun permettant de séparer…
198mm x 101mm x 75.5mm box to hold crayons. I made this for my daughter who's large crayon box fell apart. I printed this in green Overture PLA. Since this box was printed I changed the design to have a deeper lip on the lid for more…
This mold can be used to turn old crayon bits into a complete new crayon again. Cut a soda can so it can be used as a small crucible (as seen in the photo). You can then heat it using a heat gun. Using tongs, pour the melted crayon wax…
Print this using TPU. You may want to resize it between 100%-102% depending on how snug you want the button to be.
In English Since I wanted to practice modeling with Fusion 360, I designed these pencil holders from A to Z. Unfortunately they are not made parametrically and in addition I made the hexagons too large. So I scaled down the print to 60%…
This is a simple crayon box with a slip on cover which snaps into place. It holds a basic set of 8 standard size crayons. I made this so my niece would have decent crayons to color with at restaurants. I filled the lettering on the lid…
I printed everything with .2 layer and 2 wall. Also included the step files. They will print smoother but didn't test print the step file to test tolerance. I used a heatgun on the label to get it to fit the curve of the base.
Almacén en forma de crayola Almacén multiusos en forma de crayola Version seccionada sigue en fase de prueba
Un pot à crayons issu du texturage perle. Texturage renforcé pour lui donner du caractère. Bon print! PARAMÈTRES D’IMPRESSION 3D vase : taille 78X78X96 ht mm Réglages: - couche 0.2 mm - Taille de la buse 0.6/0,8 mm - Largeur de ligne 0.6…
c'est un support de téléphone et un pot à crayons très facile a imprimer !!!
My first model, I designed and printed. The model is derived from need of an engineering student. I do a lot of drafting work so I need pencils and pencils crayons readily accessible on my desk. This print uses no additional components as…
Uses (7) M3 screws and heat-set inserts to hold the mold together. Simply melt the wax and pour it in. let it cool, pull it apart, and enjoy. Made to match Crayola standard dimensions.
Just a small vase! You can do whatever you want with it, but it was originally designed to be a pen holder. Enjoy ! Makes are always apreciated !
✏ No More Scattered Pencils! This practical and elegant box is designed to safely store your colored pencils. The new version introduces an improved lid‑locking system, a wider range of sizes, and a fresh personalized lid design. 📐 Model…
Pour ranger mes feutres, stylos, cutter, sur le panneau SKADIS PETG - PLA Infil: 30% (surtout pour les crochets) Support: oui (pour les crochets) N'hésitez pas à me laisser un commentaire, ou poser une question
Simple multicolor stand for crayons. Print only one for each end and as many colors of the center stand as you need and then put it all together
A fun and practical container designed in the shape of a large crayon. Its hollow interior provides convenient storage for pens, markers, or small items, while the removable top makes it easy to open and close. A creative piece that…
La version V2 est sans perçage latéral. Impression: il faut activer l'option "bordure" pour stabiliser.
Ce pot à crayons imprimé en 3D est parfait pour organiser vos stylos, crayons et autres petits accessoires de bureau. Il permet de garder votre espace de travail propre et bien rangé.
A very basic desktop holder for the Logitech Crayon, the internal geometry is designed so that the tip does not bare any weight. This version does not include any provision for charging or cable management. Print instructions Fast easy…
Boite avec motif de chat pour contenir des crayons
This is a simple crayon box with 64 individual crayon holes. Each row changes base height 5mm. Alternating rows are offset half a crayon to the side, so all crayons should be visible (ignoring drastic height differences). The lid has some…
It´s a model of hexagon parts wich build a stand for pens and crayons. You can fit there USB or SD-cards as well. Enjoy & leave a like :)
Un pot a crayon inspiré du cubisme et penché pour l'originailté. Un système de rainurage pour emboiter le pot et sa base. Paramètres d’impression 3D GCode et STL fournis. POT: 85.5x104.5x141 ht mm temps d'impression: 3h SOUTIEN:…
Printed in PLA at 0.5mm LH using a 0.6mm nozzle Designed in Fusion 360, using 11mm radius for the pen inserts. Uses universal hook by CSD_Salzburg. Unable to attribute as they don't have an account on PrusaPrinters -…
Juste un porte crayon, inclu le lien Onshape. Imprimé une fois en résine Anycubic ABS Like Pro2 et le noir en PLA Deep Black https://cad.onshape.com/documents/1e7342829545fdbcef029993/w/e57e038b00b556dbd61fdcf9/e/8e53666930084d76e9201cd1
Pot à crayons Renault Diamètre intérieur 80 mm Profondeur intérieure 100 mm Largeur 108 mm Longueur 100 mm Hauteur 141 mm impression sans support possible
Introduction: Inspired by the 4-in Crayon Bank Rocket, this rocket was designed from the ground up to be a park flier and/or show-stopper at your next club event. The Extreme Series of Builders Kits were designed for easy printing,…
Un petit coup de pinceau et c'est reglé.
This box will store 12 crayons safely. The lid clips on the box easily but safely. The lid is a slightly hard to put on the first few times because of the layers but as soon as they wear just a bit it becomes easier. Here is a great…
This model has been created to keep some erasable pencils for my son (of the brand Super Petit). But I made it generic enough so that it can be used for any type of crayon. You can find the configurator on this web page (it does not work…
Boite à crayon en forme de container. J'ai dessiner par la suite des cubes de differentes hauteurs pour les differentes hauteurs de crayons. Imprimé en pla sans support.
Created basing on already existing CPU tray, this stackable crayon holders helps you organize crayons in a secure manner. Each holder keeps 16 crayons that are about 17cm long. There are no special requirements about printing. Supports…
La boite de crayons de couleurs, on peut mettre au moins de 30 crayons de couleurs: Pas besoin de support. Version en anglais à venir. Besoin d'autre langue, demandez-moi :) Merci
Voici un pot à crayon ou un vase suivant vos envies, la parois fait 0,8 mm d'épaisseur donc on peut l'imprimer en mode normal il y aura 2 privilèges pour une meilleure étanchéité et solidité.
