Counting matching models…
UPDATE 12.09.2025: I modified the tail so its no longer fragile and should stay connected with dragon. Caution is still needed, when removing dragon from the build plate. To be safe, wait for the bed to cool down and carefully remove link…
*** Free to print, NOT to sell *** For Commercial Rights, you must join my Club. Dec 15 - Informed there may still be an issue with the links sticking. I will correct this this weekend. Until then, just Split the model into parts or…
No need for any supports, however it has a large overhang with its crystal horns which is a good test. It will take time and I do recommend a raft or brim to be added for maximum bed adhesion and it must be taken of easily otherwise the…
This is a remix of a crystal dragon, which fixes the first two elements after the head (they are merged together and not movable in the original model) Features Articulated Looks best in Rainbow PLA Recommended print settings Layer…
Second vesrion of articulated crystal dragon. Improved joints and overall srenght of the print.
A nice tradicional pot and planter for plants or flowers. Best to be printed in 2 or 3 layered vase mode settings - material: PLA Happy printing! :D
reupload of my articulated dragon model, dont use brim
In oldtime, when people couldn´t make spears yet and the nights were darker than your frightening imagination, Crystal Dragons ruled the world. They flew without fear through the world. They loved magic crystals that gave them invincible…
crystal snake, dont use brim dont print small
This fully articulated crystal dragon is very entertaining and sturdy Print settings You can scale this up as much as you like as long as it fits on your printer. I would recommend a raft but it isn't necessary, I would also recommend…
A plant pot inspired by the perfect structure of bismuth crystals. Used Filament: This model was printed using Brass High Gloss PLA from FormFutura The FormFutura team was so nice to send us some samples and we had the pleasure to review…
Crystal Switch Dock Platform
Here is a fun but larger project to build an opening lightsaber. Most of the many parts I used to make this version were modified from other designers, mostly CaseStudyno8 . Also from Dogbert's emitter remix and timmy_d3's remix . It has…
I really liked collecting lego crystals when I was a little kid so I decided to make a jumbo sized version of it. It looks really nice on a desk or shelf. There are three sizes to choose from. I haven't printed the largest one but I'm…
Articulated LIzard with crystals. dont scale down
🟦 Zetor Crystal 8145 🟦 !!!Warning!!! Not suitable for small children. The model contains many small parts, risk of inhalation and suffocation. TIRE UPDATE - If you choose to print this update, don't print these parts black 15 by MrHanjak…
This is my next dragon. A few of the other ones I made were not very flexible, so I made this one extra flexible. When printing on an a1 mini, you can make this 33 inches. I haven't tested this, so if you print a dragon max size on a…
This model was uploaded on makerworld but did not work with prusaslicer very well. I painstakingly repainted it for 2 color mmu printing on my Prusa XL. Enjoy
"Articulated Crystal Dragon by Saber3D" had a few versions, namely the original and an "Updated" set of models that has better/thicker connecting rings. The "Updated" models would not load in PrusaSlicer with the correct multi-material…
They model is available in different sizes: 100 %: ~ Height 10 cm 150 %: ~ Height 15 cm 200 %:~ Height 20 cm Of course you can scale it as much as you want, if needed. ;) You can print it with 0% infill, but always use 2 or more perimeters.
A cood dragon size it as you please! Commercial Membership – all my models with a commercial license: https://www.patreon.com/c/BondFire
Think I'm Awesome? ~ https://buymeacoffee.com/triplegworkshop No supports needed! Scale as big as you want! Made from red/gold silk https://www.amazon.com/gp/product/B08QN2PCG1/ and blue/silver silk…
A LED mini nightlight that changes colour is used to illuminate the crystal light by fitting inside the printed model. The mini nightlight was obtained from a large on-line shopping website, quite cheap. UPDATE includes a modification to…
Following on from his Fire Dragon, please below https://www.printables.com/model/365346-articulated-fire-dragon My 15-year-old son decided to experiment with new effects in Blender and came up with this amazing looking crystalline effect.…
Think I'm Awesome? ~ https://buymeacoffee.com/triplegworkshop Download the Wall Version- https://www.printables.com/model/420380-crystal-wall Get the single cluster here https://www.printables.com/model/417129-crystal-cluster Crystal…
I remade the model
Changes: I was getting feedback that the tail was very delicate and you needed to be careful while pulling it off the build plate. And it also looks kinda wonky with the small head and massive arms. So I upscaled the head and tail parts…
A sudden disappearance of 4 hours of my life. I painted the Crystal Dragon in Bambu Studio, hopefully saving you some time. I recommend printing with flushies, and also printing 2 at a time. Would not recommend scalling down. Flush model…
A quick and straightforward print to test your 3D printing clearance / tolerances.
A moder take on the tradicional star plant pot - will fit your plants and interior beautifuly! Print information: Recomended vasemode or semi-vasemode settings (0% infill, 0 top layers, 2 or 3 outter perimeters - for a stroneger print)…
Created this stunning PS5 controller stand with realistic quarz crystals. Looks best with two materials. Update 2025-06-07: Increased the clearance to the controller. Would be happy to see your makes!
Baby Crystal Night Dragon I was asked to make a smaller version of the Crystal Night Dragon, the kid friendly version, so here it is. I didn't take the time to curl it like I did the regular Baby Night Dragon, so it can't fit on a tiny…
Think I'm Awesome? ~ https://buymeacoffee.com/triplegworkshop
A new entry in our Crystal Structure series! We hope you enjoy it as much as we do Used Filament: This model was printed using Brass High Gloss PLA from FormFutura The FormFutura team was so nice to send us some samples, and we had the…
----Shameless Cross Promotion Below---- Get the single cluster here https://www.printables.com/model/417129-crystal-cluster Get the GIANT Cluster here: https://www.printables.com/model/442857-giant-crystal-cluster/files Crystal Cluster…
The 2nd installation of my crystal lamp series. I used 3 led light strips to create multiple color combinations. Print instructions Print the top part with no infill and no bottom layers.
The pot is inspired by the structure of old fashioned crystal chandeliers. Print information: Recommended vase mode or semi-vasemode settings (0% infill, 0 top layers, 4 or 5 bottom layers, 2 or 3 outer perimeters - for a stronger print)…
Hey! Do you also think crystals are cool? You are in the right place! I’ve built a website where you can generate fully customizable crystal 3D models. Whether you want some unique 3D prints no one else has or use them in your modeling…
This cute crystal cluster was designed by daandruff and the original model can be found on Thingiverse. all credit to daandruff.
Crystal Bowl If you like it --> press like it :-) Bowl with my Quarz Crystal Design. You can use it as fruit bowl, for candies or whatever you want. Take a look at my models, there you can find other models in the design like this. Would…
In-game model of a chiral crystal formation from Death Stranding
The Articulated Ice Dragon! 🧊🐲 Also, I recently made new remix, check it out HERE Have a good day!!! --- Commercial Use --- By purchasing this design on Cults , you support my work and receive a commercial license to sell physical 3D…
For our visit to Star Wars: Galaxy's Edge this year, I wanted to do some cosplay/bounding featuring kyber crystals. But I didn't have any yet AND didn't want to spend upwards of $20 each to feature a half dozen in my planned props. That's…
I remodeled these to use Black Light strips. Use black light strips and barrel plugs with a power supply. I glue the barrel plug in the bottom with a black light strip randomly shoved inside. The black light strip superpowers the glow in…
Here is my new creation for you! Designed in about a week…..I'm not a pro. I'm curious to know which color combinations you decided to print it in!
⚫ Zetor Crystal 8045 ⚫ !!!Warning!!! Not suitable for small children. The model contains many small parts, risk of inhalation and suffocation. TIRE UPDATE - If you choose to print this update, don't print these parts 26 black by MrHanjak…
The speaker enclosure has a volume of 4.5 liters and is tuned to 60 Hz. It features a triangular port design, eliminating the need for support structures during printing. Crossover: I designed my own crossover based on online…
I designed this egg as a unique approach to the infamous Crystal Dragon egg. Most of the eggs you see have some type of mechanical means of closing. Threads, notche's etc… This egg has pockets to hold neodymium magnets!! I provide a link…
NEW AND IMPROVED! 23 Dec 2020 I've updated all the files here with newer better dice! I've included supported and unsupported files. These are designed to be printed in resin, if you're doing them in FDM you might want to split them and…
if when you print the dragon and there is a error in print cut off the chain with the error and then to connect the chains back together cut the horizontal chain so there is a small gap where you put the vertical chain and it should be…
This is a part of the Botanical Collection available in our Printables Club. A geometrical design inspired by plant ornaments and crystal structures. Very easy to print and looks great in modern interiors! Print information: Recommended…
An Simple modern plant pot and planter for your plants. Inspired by an elegant crystal structure. Best to be printed in 2 or 3 layer vase mode settings - Printing material PLA or ASA Happy printing!
A decorative led lamp resembling crystal structures found in caves. I designed this to be used with usb mood lights or one of those led flame bulbs. I purchased the usb mood lights at Walmart for about $4.98. The cord I used for the led…
We are for sure big fans of crystal structures here! So… Here is our newest model inspired by the great growths of Moon Crystals! We hope you enjoy it! Used Filament: This model was printed using ROSA 3D PLA-Silk Navy Blue The ROSA 3D…
Any feedback would be greatly appreciated. Nozzle 0.4-1.0mm Layer Height 0.2-0.3mm (Recommended) Infill 0-2% Perimeters 1 No Supports needed Scale it as you like :)
I was asked if I could make this: https://www.thingiverse.com/thing:1729963 as part of a gift but I wasn't sure where to get the LED module they used so I decided to remix the original model to fit some RGB LED Tealights I bought from…
Used Poly.cam to scan Crystal Embedded Halloween Themed Skull. Thought it came out really well and wanted to share it. Etsy Page: https://demambaprints.etsy.com Tik Tok: https://www.tiktok.com/@demambaprints Polycam scans here:…
🟦 Zetor Crystal 8011 🟦 UPDATE https://www.printables.com/cs/model/446803-zetor-crystals-update-for-attaching-a-trailer-no-s From this day on, all my models will be in the better 3MF format Look forward to other similar models, I will be…
Flying monsters or summons can land on crystal version 2.0 and 2.5, available on my Gumroads Store and my Printables Club . Overlay tile replacement for the board game Gloomhaven. Tile Count: 2 Print Settings Supports: No Resolution:…
✨ Here it is - the magnificent Crystal Dragon ✨ Numerous crystals cover its body, giving it an impressive, magical look. It features beautiful crystal wings and is highly articulated, making it incredibly fun to pose 🐉💎 The wings are…
Neck is fused at 1st joint.super flexible and pretty long. printed in PLA but possible in PETG
Print off of maker world, they are much ahead in maker world so download the model there, they are in version6 SHOUT OUT TO Andreas Bender | Vito Corleone | KyraLee | Sam P | floribwoy | itadorito | Toxicdad | joshua klingensmith | Rafael…
Small crystal shelf for displaying small minerals. Includes printable file to keep track of specimen on display (see photo). Printed with Ankermake M5 0.4mm nozzle 30% infill for crystal cluster 20% infill for base no supports PLA used:…
A simple but modern light diffuser. Looks best with colorful lights in it and works pretty great as a christmas lantern. Main tower - best to use vase mode and some clear filament Base - to be printed in full filament (Needs some glue to…
Join here to get access: https://www.patreon.com/kogi3d Hey everyone! I’m super excited to share a brand new 3D printable design with you — an Articulated Crystal Spider. Would love to hear your thoughts about it :) 🔧 Recommended…
A simple chunk of crystals that's easy to print with FDM and resin printers and it can especially looks stunning when shining a light through it!
Behold the Crystal Dragon! This 3D printable wall art captivates with its intricate design, showcasing the fusion of ancient craftsmanship and modern technology. Sculpted without wings but imbued with an undeniable presence, the Crystal…
A beautiful cluster of crystals with space to hold an LED tea light or flameless candle underneath. Turn it on and watch it glow! Prints beautifully with organic supports only on the bottom area where the tealight is held. Or delete the…
Was inspired when going to a crystal/rock/gemstone exhibit. Wanted something that looked a little more natural so I combined a couple different existing files on printables and adjusted the sizes to work better together. They were…
_____________________________________________________________________________________________________________ ☀ If you want to sell prints of this model, as well as all of my models - future and past , become an Authorized Merchant member…
Here is the file for my "The Crystal Vase" its a fun vase with facets that will show off the features of the filament you choose. I printed mine on the Prusa Mini using Spiral Mode I hope you enjoy. Thanks Bugman If you like what I am…
⚫ Tire and Wheels UPDATE ⚫ I don't like interfering with an already released model. Therefore, this update is standalone. If you choose to print this update, don't print these parts at zetor 8045/8145 Zetor 8045:…
A pot crafted by accident that turned dark… Nah it is just a regular plant pot, but it looks pretty cool! Print information: Recommended vase mode or semi-vasemode settings (0% infill, 0 top layers, 4 or 5 bottom layers, 2 or 3 outer…
Updates: May 2024: Added a very tight 0.1mm tolerance version June 2024: Added LED version I designed this for my kid after they got a kyber crystal on our Disney trip and wanted to wear it. The design is based off the Jedi crusader…
Witness rebirth in 3D form with the Crystal Phoenix Rising Statue. This printable design features a majestic phoenix bursting upward from a base of jagged crystals, wings spread wide, feathers detailed for clean filament layering. The…
This is a remix of UnimatrixRed's Lightsaber model, wherein I've added some basic LED lighting to the crystals. I've also revised the clamp lever model to make it easier to print, and have altered the nameplate on the display base to be…
⚫Zetor Crystal 8111⚫ Zetor crystal 8111 + new details update for all crystals !!! I guess no one expected it, not even me, but I decided to improve the crystals after so many years. What's new in the update? ▪ The sides where the door and…
My daughter was showing me something similar on Etsy that she wanted for her new PC build, so I decided to make an attempt in Blender with geometry nodes and such before buying the premade version. Here's the original Etsy:…
Prints very easily in vase mode :) Any material you want Happy printing!
Revised Models Now Available https://www.printables.com/model/483882-kyber-crystals-and-container-inspired-by-star-wars ----------- "What you see here may look like old junk... but let me assure you… some of it is new junk. We do this to…
Summary After a make of my previous model Led Light (Crystal on Rock) - USB powered was posted with the use of multi-colored LEDs, I decided to do more with this. It kind of ignited my imagination.... The model now presented is the…
The pot is inspired by the structure of another old fashioned crystal chandeliers. Print information: Recommended vase mode or semi-vasemode settings (0% infill, 0 top layers, 4 or 5 bottom layers, 2 or 3 outer perimeters - for a stronger…
Generate unique, ornamental crystal formations with our latest, free, 3D printable design. This customizable design allows you to choose the number of shards, the number of sides each shard has, their length, diameter, tilt and offset.…
A visually pleasing way to stop your 80 mm crystal ball from rolling away. Seen printed from vapour smoothed ABS and transparent PETG. Prints without supports. 100% infill recommended. Why 10 tentacles? It's a metric octopus.
Enjoy a freebie from the official Mythic Potions Kickstarter! Use it either as an eye catching decorative piece or offer your roleplay group some dice! The Stand B may test your printer's overhang capabilities, so keep an eye out for that…
I wanted an on-theme way to store/display my kyber crystals, so I made this! I might eventually make a v2 to accommodate an LED strip to provide some illumination behind the jewels, but that's a job for another day. Parts are split up to…
A led light with crystals placed on a rock. For a more natural look, you can paint the rock. Less light will come through the rock then. Crystals are hollowed out and in the base there is a cut-out for the led light source and the cable…
Illuminate your space with a touch of winter magic with this snowflake tealight holder! Designed to mimic the delicate beauty of a snowflake, this model adds a cozy, festive glow to any room. Print settings 0.2mm layer height works well…
Surprise your friends or family with 3D printed jewellery! Earrings in shape of crystals 💎 will add “wow” effect to your elegant outfits. 👗👠 Perfect for balls and parties 🎊 they can fit to daily outfits too. Prepared files: 3mf gcode for…
My wife wanted to have a new way that matches her aesthetic to show off some of her crystals. Being the good husband I am I made her this. Each shelf has a little lip so nothing falls out. It is pretty big so I had to scale it down to 97%…
I made a little fantasy crystal themed soap dish for the soap dish contest. The grid is printed separately so it can be a different color and its also removable. It would probably look best printed with some sparkly, maybe transparent…
I always intended to make many iterations of my mini heart-shape box , but I didn't really have the skills to do it without enormous pain (we all know what it is to work on fusion360). Now that I can model stuff more efficiently, it was…
This is a reproduction of "The Dana Set of Wooden Crystal Models" originally produced by Dr. Krantz Rheinisches Mineralien-Kontor (Bonn). triclinic monoclinic orthorhombic hexagonal/trigonal tetragonal cubic I recreated the models based…
This is a crystal inspired ring holder that prints easily. The rings in the picture are size 8, so if you have smaller fingers you might need to scale it down slightly. Nothing special is required to print this.
These are homemade kyber crystal chambers for a lightsaber. The pieces may need to be split for optimal printing and support removal. Here’s my painting and build vid, https://youtu.be/uqdFsb9ekY8 . If you guys liked this file, be sure to…
