Counting matching models…
Very grateful to MTMscad for his original, I modified it to perfectly fit the Tecsun PL-330 receiver and added a cutaway (circled in red) to allow the volume knob to turn freely.
Update: 4/26/2021 Updated for better can fit. There is less empty space between the can and the model now and the can sits higher to make it easier to drink from. This is a remix of the original https://www.thingiverse.com/thing:3743471…
Not much to say, the desk stand keeps the radio at a nice angle and the knob lets you tune faster by cranking. The desk stand should be printed on end for strength. The cuts are at a steep enough angle to print without supports. You may…
A simple model that can become a multi-color print on any 3D printer by executing a filament hot swap mid print. Just put a pause at the transition layer in your slicer settings, change out your filament when the pause in effect, and then…
This is a puck stand for the Tecsun PL-368 and County Comm GP-7 radios. This stand features a lower cut front to match the lower speaker location of these new radios. The older versions of these radios had the speaker located higher on…
This is actrally my first 3D print design model, simple and work.
My intention was to add text to the model and print individual name-tags, but I never got around to it. So, instead it is the silhouette of a howling wolf.
I just made a new stand for the radio, which improve the stability, and also can be used as a protective case. No support needed.
Holds this precision screwdriver set: https://www.amazon.com/gp/product/B09H2J4DM1 This may violate one of the Gridfinity Design Principals by keeping everything in the case, but I think the design of the case is what I like most about…
Egyszerű Cápa csuklós kulcstartó. Tetszés szerint nagyítsd. Ha tetszik néz be az oldalamra.
Another Volvo ignition charm now featuring the CSU logo. Print Settings Printer Brand: Prusa Printer: I3 MK3S Rafts: No Supports: No Resolution: 0.2 Infill: 15 Filament: eSUN PLA White/Black Notes: Recommended to do a color change at…
Made this for the fun of it, and to show some love to the new organic support. This is made as an ambigram, scale to fit your printbed :) Can be viewed from 2 sides and will show different text :) Enjoy
This print requires a multi Material Printer. There are two spots on the rear for magnets to be glued in place on the rear. I've uploaded each separate stl but also a .amf which can be loaded into slicer at one time. Colors used: Grey,…
Designed intentionally with snug fit With 0.4 mm nozzle 0.2 mm layer height Supports required
Designed intentionally with snug fit With 0.4 mm nozzle 0.2 mm layer height Requires a tiny bit of support but may also print fine without any supports
case insert for the tecsun pl310-et
Seal made for a CSUSB fridge magnet if you have some magnet paper to put on the back
Radio Support for TECSUN PL-880 for better ergonomy. Additionally this is sturdier than fold-out support on the radio that is prone of breaking easily. A slightly lower angle allows vertical position of antenna.
Modified version of Silviu's model that incorporates a wider base for further stability. I have additionally added countersunk holes that can be used to screw / stake down the radio base in order to provide more flexible mounting options.…
3D printable topographic miniature of Raleigh, NCSU - 🇺🇸 United States Capture the beauty of Raleigh, NCSU 's city landscape with this topographic miniature! This 3D model represents the geographic area around the geo coordinates 35.767,…
Made this model after trying KB9RLW's since his version doesn't fit newer Tecsun PL330 models. In case your printer is calibrated to print slightly larger (like mine), I also provide a tight version.
Desktop stand for S-8800 model radio. Has relief holes for usb power cable, antenna and external audio jacks.
Simple stand for the Tecsun Pl-368 with a built in storage for the AM antenna. Insipired by: for dimensions and holder - https://www.thingiverse.com/thing:4371146 and for the layout - https://www.thingiverse.com/thing:5296825
A small hat to prevent the antenna too folded in and cannot be take out.
This screwdriver set (https://www.amazon.com/gp/product/B09H2J4DM1) needed to be on the Skadis board, so I drew up a quick model this morning to mount it.
This is designed to work with the Crave Strong Guard case for the Google Pixel 3a ($12 here: https://www.amazon.com/dp/B07V1R99V8 ). It was designed to replace the hard plastic part with a new design with 2 goals: 1: Hold 2 credit/ID…
Two color drink coaster with the logo of CSU Chico mascot. Print each color separately and snap together. Set at 0.2 mm clearance. Includes Fusion360 file in case you want to edit the model. If you have a PEI sheet or similar and you want…
