Counting matching models…
Ich war es leid drölfzig verschiedene Adapterscheiben zu bevorraten, von denen dann doch wieder keine passt. Deswegen habe ich passend auf den Filament Spool Winder diese universal Adapterscheiben entworfen. Passen auf alle Rollen mit…
For best result PETG or better, 6 layers top and bottom, 6 walls, infill 35%+ cubic. No support needed. orientation as in the photo with these parameters, it will withstand a direct hit from a ball, 1.7 J. I haven't tested higher. You…
Uses two parts with clips that slide into each other. One part goes on the dock and utilizes the two M4 mounting holes. The other part is screwed into the desk and uses any small wood/sheet screw (I use 2.5x10 screws). Printing Both parts…
Description I was looking to hide my Dell Pro Dock under the table to reduce clutter and create a cleaner workspace. It was designed for Dell Pro Dock family (WD25, SD25 and variables) with the goal of preserving air circulation, access…
těsnění je nutné vytisknout z pružného materiálu jinak nejde vložit, případně pasuje originál těsnění Pavliš Hartmann
Sonnenschirm Schelle D25,4 Befestigungsschrauben 4mm Spax
Overview This is a custom-fit mounting rack designed specifically for the Dell WD25 Pro Dock . The design is optimized for vertical printing and doesn't required any support. To limit wrapping during the print, I added a slot on the back…
Under desk or wall mount for a Dell WD25TB4 dock. 2x M4 x 10 socket head cap screws to attach dock to mount 3x M4 flat head screws to attach mount to desk or wall Don't use too long of a screw to attach the mount to the dock, or you could…
Description on reddit: https://www.reddit.com/r/headphones/comments/4060mp/i_have_finalized_my_hd_25_detachable_cable_mod/ If you want design files, ask.
Accurate, jointed model of the Steelex D2580 solid rubber swivel caster wheel. Seems the original product isn't still on Amazon, but this one looks very similar save for the lack of black paint: https://www.amazon.com/dp/B07DGQ8WTY The…
A set of magnetically attached way covers for both the lathe bed and cross slide. The bed covers are meant to hold 100mm flat bellows which can be found on ebay for pretty cheap. They consist of one bottom piece that attaches to the bed…
High-Quality Funnel with a 25mm diameter Are you tired of spills and messes when transferring liquids or dry ingredients? Our premium funnel with a 25mm diameter (D25) is the perfect solution for all your pouring needs! Designed for…
Ich verwende diesen Verbinder, um einen von der Dachrinne kommenden Wasserschlauch mit einem Schlauch zum Wasserfass zu verbinden, die unterschiedliche Durchmesser aufweisen. Der Zulauf von der Dachrinne hat einen Durchmesser von 25mm…
Support HikVision DS-2CD2543G0-IWS
I got very fed up of the belt tensioner falling out of the bottom of its slot on my Proxxon PD250/e lathe, and eventually got round to drawing this thing to fit into the bottom of the slot, and block the tensioner from falling too far.…
Spare cap for Parkside vacuum cleaner PWD25 A2. Cap is ready to use, no seal needed. Three version included. Basic cap - zatka PKS.stl Cap with 3/4 thread - zatka PKS 3-4.stl Cap with 1/2 thread - zatka PKS 1-2.stl Feel free to remix it!
Required parts: 25* Diodes (1N4148) 25* Key switches 25* 1U Keycaps 4* M3x10 socket screws 2* M3x10 countersunk screws 1* Arduino Pro Micro ( I used a type-C clone, that's what the case fits) 1* 128x32 SSD1306 OLED 4* Rubber feet (optional)
This is a remix/mashup of several existing designs I found and modified to my needs. The clips fit on the Aero band nice and snug if you put them on where the band narrows just behind the tilt adjustment knobs and slide the clips back.…
The Makita UD2500 is a great garden shredder, but it lacks a prodder to push loose branches that get stuck in the machine. I created this model that is divided into two parts and assembled with 4x M6 screws Printed in PLA with 4…
Basis CAD: Fusion 360 Printer: Prusa MK4 Layer 0.2 QUALITY Nozzle 0.4 Infill 20% Gyroid PETG (Prusament) Benötigte Bauteile Rillenkugellager 608ZZ Innendurchmesser: 8 mm Aussendurchmesser: 22 mm Stärke: 7 mm Dichtung: ZZ ,beidseitige…
Could not find these any longer so created them in Fusion and printed them out in TPU98. Seems to be working fine so far, and if they do fail I will just put in some new ones :) I printed them flat so the filament would be pulled in a way…
just a simple and quick friction locking diffuser for a Fenix PD25 flashlight. Translucent colors and pure white filaments seem to work best. If you liked and found this print useful, please give it a like.
EN: For my old BD250 impact drill from Black&Decker, I reduced the recess to a 22 mm radius using the great idea from 3D-Kalle . Material: HT-PLA / PLA Layers: 0.3mm Supports: recommended in the area of the recesses for the spirit levels.…
Made a simple adapter to make it possible for LED-light mounting. This design requires you to remove the original debris shield.
[pl] Redukcja do foteli wędkarskich z d36 na d25 i odwrotnie. Pozwala założyć różne akcesoria do krzeseł. [en] Reduction to fishing chairs from d36 to d25 and vice versa. Allows you to attach various chair accessories.
Realized that my bike was missing this part and the only supplier for reproductions does not ship to my country. I re-made these from pictures of the internet together with measuring my original filter. If someone has the original and…
This is an adapter to mount a Raspberry Pi 3B+ (or any RPI with the same mounting pattern) in a BCN D25, W27, or W50 printer (It might also work on an R19 Sigma or Sigmax, but I haven't checked yet). The mount and Pi replace the original…
This is a Cap for your Ugreen 100W CD254 Charger. It helps to Protect the plug part.
This is a case for the Audio-Spectrum-Analyzer VFD2515 to be able to use it as standalone device. I placed the input sockets on the backside of the case to hide the cables. To power it direct from the STB standing below I used an…
Boat rod holder to D25mm handrail and for four rods
I recently upgraded my Quest 3 Headband from an elite style strap to the recently released (2026) BOBO VR M3 which I now love. Link to headset: https://www.bobovr.com/products/m3 For my previous strap, I simply cut a notch in the band so…
These are spacers used to adapt the GD25 Mast Tip to a spike like the Dude Spike 2.0 or the spike mount Chameleon Delta Loop. I have printed at 100% infill, you do you. Here is a video showing it with the GD25 and the dude spike 2.0
Rain sensor holder ZTS-3000-YUX-N01-H for D25mm pipe. In the published version, instead of a washer, there is space for a nut. Uchwyt czujnika deszczu ZTS-3000-YUX-N01-H na rurę D25mm. W opublikowanej wersji zamiast podkładki jest miejsce…
Uses two parts with clips that slide into each other. One part goes on the dock and utilizes the two M4 mounting holes. The other part is screwed into the desk and uses any small wood/sheet screw (I use 2.5x10 screws). Printing Both parts…
porte savon et son blocage, a monter sur tube de douche de diametre 25mm soap dish and its blocking, to be mounted on a 25mm diameter shower tube Print Settings Rafts: Yes Supports: No Resolution: 0,2 Filament: zortraxx PETG and Nylon…
simple box for PWM regulator Cytron 25Amp 7V-58V High Voltage DC Motor Driver
I designed this model in Onshape with the primary goal of freeing up space on my desk by securely mounting the DAC. The mount is intended to be screwed into the desk for a stable and permanent solution, but for those looking for a more…
I'm new to 3D printing, but I think I have a good mind for it. Most of my designs will be built for function. New Version 3 added with a crossbar for added screw support and proper distancing to not block front ports.
I needed some kind of bracket for a D25mm furniture pipe, and based on this bracket, I made this remix. I made it out of a double shelf bracket, I was afraid that a single one might not hold.
Приспособление представляет собой деталь, позволяющую сделать из болта с гайкой М8 и обрезка мебельной перекладины (труба25мм) корончатое сверло для вырезания круглых заготовок линз зеркал итд диаметром ~24 мм с помощью шуруповёрта с…
porte savon et son blocage, a monter sur tube de douche de diametre 25mm soap dish and its blocking, to be mounted on a 25mm diameter shower tube Print Settings Rafts: Yes Supports: No Resolution: 0,2 Filament: zortraxx PETG and Nylon…
Proxxon multi holder pd250e, Print Settings Printer Brand: Prusa Printer: i3 MK3 MMU 2 Rafts: No Supports: Yes Resolution: 2 Infill: 15 Filament: universa pla yellow Notes: Proxxon multi holder pd250e, Category: Hobby
porte savon et son blocage, a monter sur tube de douche de diametre 25mm soap dish and its blocking, to be mounted on a 25mm diameter shower tube Print Settings Rafts: Yes Supports: No Resolution: 0,2 Filament: zortraxx PETG and Nylon…
Držák čelovky Boruit
Adapter for using a CSS Audio LD25x tweeter ( https://www.css-audio.com/online-store/CSS-LD25X-XBL%5E2-25-mm-Silk-Dome-Tweeter-p144557321 ) in a Sony SS-TL5 speaker
