Counting matching models…
EDIT 2023/8/5: Forgot to add my wire tie beam it keeps the cables up from the plate. EDIT 2023/4/7: Finally made my own clone of the effector from scratch out of FreeCAD. No Spacers required now. Much cleaner and got back 10mm of height…
MGN12 carriages for SeeMeCNC's barbells. For each carriage you will need 4 McMaster M3 Heatserts https://www.mcmaster.com/94180a331 4 M3x16 Screws (Mount to MGN12H car) 2 M3x20 Screws (Barbell) 2 M3x12 Screws (Belt Retainers) 1 M3x12…
A mount for the Mosaic Palette 2 on the Ultibots D300VS delta. It should work with any delta that has a slotted extrusion on the exterior corner of their printer. The filament can then feed from the floor, freeing up valuable desk space.…
My modifications to the D300VS+. Great printer these modifications just trim up the printer nicely. Also includes files I used to calibrate my D300VS+ after the build. Highly recommend the Hardened Hob Gear for the Titan Aero, I was…
My Dust cover for the Ultibots D300VS+ inspired by AndyFromSpaces dust covers for the Micromake D1. Added a step and FreeCAD file so that others could use it to modify for other large 2040 vertical slot based delta printers. This is part…
Still was having issues with getting good bridges and overhangs at fast printing speeds so I decided to just go with brute force cooling with two 5015 fans . Works like a champ, can work too well. Make sure your hot end has a sock and you…
This is a ball-cup arm upgrade set for the Ultibots D300VS, for use with Trick Laser/SeeMeCNC fixed-width barbells and Trick Laser Ball-Cup Arms, as well as the stock Ultibots micro extruder. It should be possible to use this set with…
