Counting matching models…
This is a replacement part for the rain gauge cone on the Davis Vantage Pro/2 weather station. It prevents debris from entering the rain gauge and potentially blocking the rain gauge. It sits directly on the bottom of the cone and can be…
These are 3D scans of the Eggheads from UC Davis. The scans were done using Polycam on an iPhone.
This is a 3D scan of the Mrak Hall Egghead from UC Davis. The scan was done using a Canon mirrorless camera and Mushroom. There are 3 STL files: Main egghead scan Mini version of the egghead Egghead modified to work as a pencil holder…
Designed this active fan kit for the Vantage Pro 2. Try printing the parts without support, worked for me. Additional parts required: 3x M4/M5x100 screws 3x M4/M5 nut 2x Distance/standoff bolts M3x30 (or use Abstand_25mm.stl) 1x 1767 12V…
Designed this so I could move the rear lights from the stock location to accommodate the fitting of saddle bags without Interference, bolts to back of number plate bracket. printed with ABS
Davis, for all its expensive glory, decided to cheap out on the hundreds-of-dollars console with a stupid afterthought kickstand. Replacements are available, but they end up being like over $30 shipped, for a ridiculous flimsy piece of…
Davis and Sanford quick release plate. Has 0.79mm (roughly 1/32nd of an inch) indentations on the top to allow for adding 1/16 inch rubber (or similar) pads to help prevent camera twisting, leaving approx 1/32nd of an inch sitting above…
This adapter installs by removing the clevis pins attached to the jib furler and the hardware that comes with the Davis Telo-Cat. Allows for the Telo-Cat to be easily removed when not in use.
1:1 and 1:8 scale model of a brodavis. The model features detailed feather texturing along the model. I recommend printing it at a finer layer height or with a resin printer. The files are pretty large, they may take a while to load. 1:1…
This tripod quick release was designed to attach to a Davis and Sanford (Tiffen) ProVista tripod with an FM18 Fluid Head. The four mounting holes will accept ¼-20 nuts. Use with nuts if offsetting the telescope to one side of the tripod.…
Convert from treadle to a motor using these parts that are held on with magnets. The bigwheel keeps the speeds appropriate for this old machine and makes low-speed control easy. It uses 24 ¼" cube magnets to hold it in place. The machine…
I made this to be CNC machined and used as a bumper sticker. Can be 3d printed though of course.
Way back when I first got into video, I bought a mid-range ENG tripod from B&H during a sale. The tripod was a Davis & Sanford Provista 7518 with FM18 head (#DAPVT75) and B&H bundled it with a free Davis & Sanford W3 dolly (#DAD3) for…
Specific mount plate for Davis & Sanford Vista Attaras (mouthful), intended for use in the Hadley Tripod Mount M5 Metric Remix. For remixing use this onshape link.
A mount, that centres the sensor of the DAVIS346 event camera, pair with some wing nuts and rails for experimentation.
Made a simple keychain for UC Davis Category: 3D Printing
Do not use PLA. ASA is recommended but PETG could be used. The 17mm ball takes a 4mm x 30mm bolt to strengthen the mount.
