Counting matching models…
EDIT: Fixed the issue with the Emissions Box dividers being too tall. So sorry to anyone who had that issue. First, I understand that adding plastic to a game that was made with no plastic might not be what the designers intended, but…
This is a light bar mount for the Voron V0.2 (and probably the V0.1) for the V3D DayBreak NEO-Mini LED sticks. These mounts attached underneath the 1515 extrusions below the gantry and use the same M3 screws and nuts the rest of the…
In honor of the new Kennerspiel des Jahres winner of 2024, here is my insert available for free! If you want to support my work and all of the free designs I donate to the community consider buying something from my Etsy shop or my…
A airsoft chassis with easily detachable hand guard and stock for the v2 gearbox. Uses standard M4/M16 airsoft mechanical parts. Hardware is M4 and threaded inserts. Here is a link to the Onshape document:…
3D printable piece, designed to work with the flywheel puller metal part made by Fetteworst, to pull any Daybreak, Kepler or Pulsar wheels (or any other wheels with the same top geometry) off a motor shaft, without risking bending the…
Bracket for 3030 profiles to mount the Daylight/Daybreak lighting at a 45 degree angle. M6 12mm screw for profile mounting with T-nut. M3 Heatinsert for mounting the lighting - length almost does not matter. Mine had a length of 5mm and a…
flywheel cage for nerf vulcan. 40mm daybreak flywheel compatible. Secure in stock vulcan barrel with tape, glue, or short screws. shell cutting and barrel trimming required
Note that some versions in the pictures are outdated - the stl files have been fixed, but I didn't want to unnecessarily print new ones while the old ones still somehow work (even if not perfect)
An insert that fits One Night Ultimate Werewolf and Daybreak and either of the original boxes. My first copy of ONUW ended up having one of the role cards marked due to damage on one of the edges. As the damage was visible on the back of…
As mentioned in one of the comments on the (amazing) original model by @irmcdermott_603291 , the lid doesn't fit for the emissions box (I also only realised this after printing). I modified the original STL using my limited knowledge of…
I wanted a diffuser for the daybreak neo leds I had on my trident 250 the original file was too short so I adjusted the file to suit the vector3d daybreak neo led strip.
UPDATES: 01/06/2026 Updated tolerances on Upper Front, Rear, and Top Rail, alongside more space for the ESC. Thicker Cage Mount Front, means barrel is less likely to wobble around and come loose Cage Roller added to Cage Mount Front,…
These are spacers for Daybreak and Kepler wheels using Kury's cages. The ideal spacing is 2mm from the top of the cage basin to the bottom of the wheels. These are square so model orientation does not matter.
An organizer for One Night Ultimate Werewolf that also fits the Daybreak expansion in the same box. I have 95x60 mm sleeves, which don't fit with the organizers I saw out there so I made my own. The holes below the cards are to reduce…
Spacers go under the cage and might be finicky. Use tweezers and try multiple times. You will have to cut all of the purple plastic underneath the gray side pieces. There are also a few other cuts that have to be made for talons to fit.…
Organizer for Battlestar Galactica - Daybreak and Exodus to store them in a single box. We rarely use Exodus so that goes to the bottom. I printed two additional english rulebooks, so maybe you will need a couple mm thick filler…
The Daybreak has a different diffusion system, which my ptfe was hitting. This diffusion bar is much better in that regard. I had to remix because the screw was at the wrong spot. I created 3 versions: 2mm thickness (original) 0.6mm…
Daybreak over mounts on top of the Y extrusions. Daybreak under is designed to mount under the front extrusion. Daybreak dual is a combination of the over and under to provide flexibility
The Riot is a 3D-printed flywheeler designed by Chance. Essentially, it is a larger, full-sized wheel version of the Blitz micro-wheeler created by the same designer. These alternative flywheel cages are variations of the original 40.0mm…
A mini-sub from Dolphins at Daybreak
A 40mm flywheel Daybreak compatible cage based on Kuryaka's Daybreak cages. I added the connector posts from BuffdaddyNerf's cage design to mount to the stock cage position. This cage is compatible with the stock cage mounting, Cake's…
Hello, I have created an emissions counter for the game Daybreak or e-Mission.
Made the throwing darts used by Nadia in the game Trails through daybreak 2. Model info Because the weapons in the game are huge so are those. They measure around 60CM in total lenght. Print info All parts can be printed without any…
The Maxim Pro Flywheel Cage is the 3D-printed cage included in our Adventure Force Maxim Pro Mod Kit. Designed to be compatible with Kuryaka's Daybreak full-sized flywheels, this single-stage cage improves performance and accuracy over…
I couldn't find the type of shield I wanted for Halloween on amazon, so I decided to make my own using Tripo AI.
This cage is tuned for the MK3. While the MK3 is an incredible blaster, the stock cage and wheels are very much an entry-level setup (nearly identical to basic worker wheels and cage). FEATURES: • MK-3 OOD Pro Cage • Designed by Luke •…
Protector and holder for the included Crinear Daybreak interchangeable 3.5mm single ended and 4.4 mmbalanced connectors.
UPDATES: 01/06/2026 Updated tolerances on Upper Front, Rear, and Top Rail, alongside more space for the ESC. Thicker Cage Mount Front, means barrel is less likely to wobble around and come loose Cage Roller added to Cage Mount Front,…
Urbosa's Daybreaker shield from The Legend of Zelda: Breath of the Wild! This listing is for the digital .STL files for you to download and print at home on your own 3D printer. Model is split for 250x250x250 machines, and recommended for…
The Riot is a 3D-printed flywheeler designed by Chance. Essentially, it is a larger, full-sized wheel version of the Blitz micro-wheeler created by the same designer. These alternative flywheel cages are variations of the original 40.0mm…
UPDATES: 01/06/2026 Updated tolerances on Upper Front, Rear, and Top Rail, alongside more space for the ESC. Thicker Cage Mount Front, means barrel is less likely to wobble around and come loose Cage Roller added to Cage Mount Front,…
Urbosa's Daybreaker shield from The Legend of Zelda: Breath of the Wild! This listing is for the digital .STL files for you to download and print at home on your own 3D printer. Model is split for 250x250x250 machines, and recommended for…
2 fittings, relaxed and tight 2 length, full and 12.5mm used with the endcaps i made Baffle and mounts are from the following github, included here for conviniece…
