Counting matching models…
Einen Einbauadapter um den Schappach DC100 zum Zyklonsauger umzubauen , den Adapter in den Sauger innen einsetzen und am besten etwas mit Silikon oder Gummiunterlage unterfüttern damit keine Falschluft angesaugt wird , dann mit…
Makita Battery Charger DC10SA & DC10SB: This is a wall mount for the 10,8V or 12V Makita charger similar to the approach of @Jeffeb3 for the 18V charger. It fits with the Makita DC10SA and B. print setting: PETG (but PLA should also work)…
Something to safely wall mount my spare Makita 12v Charger DC10SB using command strips in a more handy location. Includes files for both sets of mounting holes, short with the cord at the bottom. And long with the cord at the side. Note:…
On the Scheppach DC100 the inlet blows straight onto the motor assembly and clogs up the filter. I wanted to change the direction of the inflowing air to get some cycloidal action going. Angling the 100mm hose would require a much bigger…
Adapter to connect a HT Pipe DN 50 to Scheppach DC 100 (Parkside PASA 1200) or similar. Prints without support.
Einfacher schneller Adapter um an einen DC100 von Scheppach, ein HT Rohr anzuschließen, da mich auf meinem YT Channel jemand danach fragte. Ich habe es anders gelöst, deshalb nicht gedruckt. Sollte aber passen. Ansonsten die Parameter in…
A remix of a wall mount for the DC10SB and DC10SA charger with added screw holes for mounting. Yes the holes are not symmetrical, that is because it was needed in my situation and totally not because I made it by plonking down two cones…
This Adapter screws in place of the original inlet with the original screws and without any other modifications necessary. It provides a decent cyclone effect to reduce clogging of the filter. Additionally it reduces the inlet to fit…
This is intended to be used with the honeycomb storage wall The model has an opening for saving filament and inserting the DC10WB battery. Included is a screenshot of the print orientation I used with organic supports. These are the print…
Wir haben seit ca. Zwei Jahre sind diese Absauganlage her und sind eigentlich sehr zufrieden. Was stört, ist, dass die Späne und der Staub sofort vom Rohr in Richtung Saugmotor mit den Filtern fliegen. @Angeregt durch ein Video, wo ein…
Secures the DC107 Digital Angle Finder to the the LIDL/ Parkside Pegboard. You will need to add support for the hooks on the back. This holder fits tightly onto the Parkside board, so be careful not to snap the hooks off while installing…
Passend zu den erstellten Wandhalterungen eine Erweiterung für das Ladegerät DC10WA von Markita. Die Originalen Schrauben wurden Entfernt und durch Blechschrauben 4,5x40mm an den zwei Elementen befestigt. Hierzu ist auch ein Loch…
Das passt in den unteren Kragen vom Fass, ich habe die Füße noch mit Doppelklebeband am Boden befestigt und Filzplättchen drunter geklebt.
DC10WA Skadis Use the universal Pegs from @KimJanosch https://www.printables.com/model/635620-skadis-skadis-universal-peg
These are Team Associated DC10 body mounts. I made these to fit the Team Associated Nissan 400Z body onto this chassis, but they may be useful for you as well. I had no intention of sharing these, so never took formal pictures. Sorry. I…
The stand that comes with the rythmagica TDC10 makes it extremely difficult to move around, having to treat the stand and the drum as two individual units. These legs can be attached with 4 M4x30 screws.
This associated dc10 low profile battery tray reuses the stock components but is less bulky. Works with stock carbon chassis or floating battery mount. Designed with redline lcg 4000 mah packs but should work for others with same or…
Wall holder for DC104 ( and other if they fit ) remote. Can be installed using double-sided tape or you can add holes and attach it with screws . Customization: You can find the Fusion 360 .f3d file in Files Printing: No supports are needed
Can be printed well using PLA, I suggest using more perimeters (4+ at least for modifiers over the screw holes) so you could drill out these for larger screws. Screws length is not a big issue as these will not go against the grid.…
Zur Befestigung werden zwei 5- oder 6-mm-Schrauben benötigt. Die Größe der UPS-Schnittstelle beträgt 32 mm in der Dicke und 105 mm in der Breite. Theoretisch kann dieses Modell als Basis für die Befestigung anderer Mini-UPS oder Boxen…
Wall holder for DC104 ( and other if they fit ) remote. Can be installed using double-sided tape or you can add holes and attach it with screws . Customization: You can find the Fusion 360 .f3d file in Files Printing: No supports are needed
DC10WA Skadis Use the universal Pegs from @KimJanosch https://www.printables.com/model/635620-skadis-skadis-universal-peg
Something to safely wall mount my spare Makita 12v Charger DC10SB using command strips in a more handy location. Includes files for both sets of mounting holes, short with the cord at the bottom. And long with the cord at the side. Note:…
2 models, one with big hole round battery, and one with slightly smaller hole.
Simple wall-mount bracket for DC1018P UPS. Prints without supports, PLA, PETg, etc. STEP file included.
A remix of the Makita DC10WA Charger Holder on thingiverse https://www.thingiverse.com/thing:5792482/files to use the Skadis/ SKÅDIS universal peg https://www.printables.com/model/635620-skadis-skadis-universal-peg
This model is basically a slightly enlarged case for a common DC1036P UPS with internally-mounted non-removable 4S battery pack. The model includes a case compatible with a standard R10 board and POE board and has provisions for a 18650…
A partial replacement (designed for temporary use as a spare). This hinge pin holder lets you keep driving while you wait on an order. It could be modified or strengthened, but I just needed a quick fix for the kids to keep driving! Print…
2 models, one with big hole round battery, and one with slightly smaller hole.
