Counting matching models…
Thanks to blueOcean for making this tool mount. I traced it in OnShape and removed the french cleats and added some screws. The charger fits perfectly. Don't mind the multiple colors, I ran out of filament in the middle of the print.…
I created this model for a friend, as he didn't like the much simpler wall mounts like this as they utilize the holes of the rubber feet, which have to be removed. And the charger is fixed permanently to the wall and can not be quickly…
I designed this holder to attach my charger to the wall. The rubber feet must be removed and the housing screws unscrewed. After that, the holders are placed and screwed in again with 4x40mm or 3,5x40mm countersunk screws with a rough…
A simple flat mount for the most common Makita chargers on the market, no need to try and line things up like with the single foot models or like the dual tilted ones. This model is easy to print and easy to use. To install charger, screw…
Printed on its side for strength, this Makita DC18RC battery charger slides into the mount with a solid clunk. The original model did leave some excess tolerances, causing the charger to lift a few millimeters when removing the battery. I…
Makita DC18RC wallmount 2 files (sorry only gcode available) Petg 0.2 / time: 6hr Flex 0.2 / time: 1hr Charger easy to take off, if needed
You need 3 M3x10 or M3x12 Screws and 3 M3 square nuts to screw the parts together. I suggest to first insert the square nuts in the bottom part, than mount the bottom part with 2 6mm countersunk screws at the wall and than screw the upper…
French Cleat - Makita Charger DC18RC Support A French Cleat Support for the Makita Charger DC18RC Designed to fit a plywood French cleat size: ¾" ~ 18mm BENEFITS: Fast to print Easy to use Perfect fit Designed for FDM Printing No support…
A really sturdy Skädis mount for your DC18RC charger. STEP and F3Z files are attached if anyone wants to play with the design, minimise it, enforce it or anything really. I find the current design stable and sturdy without any wiggle room…
These stands for Makita DC18RC battery chargers has a much higher angle as others around. I use them as stand, but they can also be used as wall-mount. Also, they can be used normally or upside-down. When used as a stand, there is enough…
Passend zu den erstellten Wandhalterungen eine Erweiterung für das Ladegerät DC18RC von Markita. Die Gummipuffer und die dahinterliegenden Schrauben wurden entfernt und durch Blechschrauben 4,5x40mm für die Montage ersetzt. Hierzu ist…
I was missing mounting options for my Makita DC18RC charger using openGrid . So, I took inspiration from existing wall mounts and designed these brackets, which work with openGrid using Multiconnect. This mount uses 7x5 openGrid tiles and…
Description This bracket allows you to mount a Makita 18v battery charger (DC18RC) on the wall to get it off the shelf/workbench. It includes cutouts to allow air to get to the vent on the back of the charger and circulate under the…
I printed these vertically with supports (grid) so that it is stronger. The first time I printed it laying flat, but the round nubs broke off very easily. In addition to this you need the std_base_hook_mini.stl from @TJDesign.
Best print with PETG: stronger and temperature resistant compared to PLA. Print vertically as shown on image, supports needed. I used to have this model, but after some time charger started to fall out, so introduced "full encasement"…
Wall mount brackets for the Makita single battery slow charger [DC18SD] and the quick charger [DC18RC]. Each mount is in two parts and there is a slight difference between the slow and quick chargers. Each mount needs five wood screws to…
Die Gummifüße des Ladegeräts können einfach entfernt werden. Die vier Schrauben, die unter den Gummifüßen zum Vorschein kommen, müssen entfernt werden. Die Schrauben werden gegen M4 30 mm Senkkopfschrauben ersetzt. Damit sich nichts…
This is a remix of the model created by @blade_512558 who made a perfectly fitting wall mount for the Makita DC18RC battery charger. I wanted to have this for my honeycomb wall, so I added some of the required fasteners Please note:…
[EN] Description A minimalist and sturdy wall mount holder specifically designed for Chinese clones of the Makita DC18RC charger. This bracket allows you to mount the charger securely on a wall or workbench using two screws. Compatible…
C'est un support pour chargeur de batteries 18 volt de modèle DC18RC. Ce support ce fixe au mur grâce à 6 point de fixation pour vis de diamètre 4.5. Il est recommandé d'utiliser une attache de collier afin de le maintenir sur le support,…
Makita DC18RC charger holder for Honeycomb storage wall. Has holes for 6pcs M3x16 SHCS bolts. Mounts in to the original HSW M3 nut holders.
I printed this very well designed Makita charging mount However, I found that the rubber feet designed to support the mount were too short and with the battery on there, the charger would on occasion slip out and fall. Instead of…
A simple flat mount for the most common Makita chargers on the market, no need to try and line things up like with the single foot models or like the dual tilted ones. This model is easy to print and easy to use. To install charger, screw…
There's a lot of DC18RC mounts out there. Here's another. No screwing into the charger itself. These feet need to be printed in TPU. Ya pop out the original feet, jam these in, and screw the little “ears” down with #8 screws! The charger…
One stop shop for a wall mount for the DC18RC charger. Standoff is 12mm long(8.2mm diameter instead of 8.1mm from original) with a 3mm base to tie them all together. Has a 4.5mm through hole for 8G screws and a 1.5mm chamfer hole. The…
Bracket for Makita Charger DC18RC for mounting on IKEA Skadis pegboard (Might fit other charger models also) Use the original Makita charger rubber grommets on the bracket. These will hold the charger in place, but you may also detach it…
Wall mount for Makita DC18RC battery charger. Requires no modifications to the charger, i.e no need to remove rubber feet, or any screws. Printed in PETG for a little flex and resilience, but PLA/ABS, etc should be fine.
used tree supports. Printing from PLA basic
A drill guide for installing the Makita Battery Charger DC18RC wall mount . I made this from quick measurements of the wall mount while attached to the charger. For me it turned out a bit of a tight fit for the lower studs, so please…
