Counting matching models…
This is a simple holder for fallkniven DC4 whetstone, but will fit similar whetstones of similar size. Could be scaled to fit whatever size you have. I printed it in PLA and TPU, both work great. If you need a similar holder for any other…
Print approx. €0.69–€0.85 excl. taxPreliminary estimate for one variant
Wanted a simple guide to sharpen all my knives. Created few prototypes before having this last version which is the most convenient for me.
Wanted a simple guide to sharpen all my knives. Created few prototypes before having this last version which is the most convenient for me.
ABS printing, nozzle 0.4, layer 0.15, filling 75% concentric lines. After printing, press the bearing into the central part 10*5*3.
A simple design to hold a Fallkniven DC4 sharpening stone. Printed in PLA, 0,2mm layers, 15% infill. Un suport tout simple pour pierre à aiguiser Fallkniven DC4. Imprimé en PLA, couches de 0,2mm, remplissage 15%.
Canister fall off when emptying it? Maybe your missing this part on your Dyson DC41 . Print out this part, cut a ballpoint pen spring in half put under the button holding down while sliding in and viola' - you have fixed your waste…
Accurate DC42 IR probe board model for use in assemblies and fitting. Dimensions taken from https://miscsolutions.wordpress.com/mini-height-sensor-board/ (see 'Appendix: Board Dimensions') Pins and capacitor legs extend realistically on…
Designed for a HE3D K280 delta printer; would doubtless work on K200 and many other Chinese deltas that use a E3D clone hotend having a square cold-sink block with 4x unused mounting holes on the reverse side to the fan (17mm apart). It…
Adapter to mount a DC42 Differential IR height sensing board instead of a BLTouch. Should fit all extruders with a BLTouch mount, as long as there is enough space for the board. The board is a bit wider than the BLTouch. The photo with…
Holder to mount David Crocker's Mini Differential IR height sensing board on the (old style) Creality print heads as used on the CR10/CR10s/Ender 3 and similar printers. See https://miscsolutions.wordpress.com/mini-height-sensor-board/…
This model connects the brush rollers on a Dyson DC41 to the drive motor. I needed to replace one of the bearings on mine and was unable to remove it, so I had to design a replacement for the pulley also. Be sure to print this out of a…
I have a Dyson DC41 Animal vacuum cleaner. I like it because I have 2 dogs and it works great on dog hair. However, the plastic piece used as the release button for the canister, has broken twice. That little plastic part is sold in the…
A mount for DC42's Mini Differential IR height sensor and an x-axis extender bracket to prevent the IR sensor connector from hitting the linear bearing bracket. there are 2 versions of the Ir mount, one for use with a m3x16 bolt and one…
Remix of boweeble's hotend mount to add support for the DC42 IR probe. Category: 3D Printer Parts
This is an E3D Titan mount for the HyperCube CoreXY 3D printer, with a DC42 IR probe. I have designed it with M3 threaded 4mm knurled inserts for the main mounts. For the time being - use the NoPCB option (the other option is for my as…
Je n'ai pas trouvé le nom exact de cette pièce... mais si vous l'avez perdu comme ma maman (allez savoir comment ??), voici mon fichier STL qui fonctionnera à merveille ! Je l'ai modélisé à partir de ma brosse DC35, et ça fonctionne aussi…
Just a way to hang all DC45 accessories to a wall or a cabinet side. Print with 4 o 5 perimeters, 0.3mm layer height, 50% infill, with flat side on bed. No support required.
I really liked the box, but the ESP32 I had laying around didn't have any holes for screws. It also came with all of the pins mounted, and I didn't want to remove them. So I put in a "shelf" that the ESP32 snuggly straddles leaving enough…
Big Update After a while even with PETG the close distance to the Volcano Block made one of the Arms soften and hang a bit. Also I tested multiple hole Sizes and learned that I underestimated the static pressure that is working against…
Adapter bracket to suit the thing http://www.thingiverse.com/thing:510957 and an IR sensor https://miscsolutions.wordpress.com/mini-height-sensor-board/ Oct 1st made a second revision of the bracket as i was concerned that the sensor was…
Printed parts for Precision Kossel printer described at https://miscsolutions.wordpress.com/dc42s-large-kossel-build/ Category: 3D Printer Parts
The hose broke on my Dyson - at first, I just heard a high pitched squeaking sound, with some loss of suction. Upon inspection, I saw the tab holding the "internal hose" (best guess is part number 920682-01) had broken, allowing the hose…
This is a holder for the Fallkniven DC4 Diamond/Ceramic Whetstone. The stone should fit tightly into the slot. Print Settings Printer Brand: Prusa Printer: I3 MK3S Rafts: No Supports: No Resolution: 200 Infill: 60 Filament: Generic PETG…
Satsana Fan duct remixed for usage with DC42 IR probe. To install probe unsolder dupont pins and solder a low profile connector to the back of the board or 3 wires coming directly out of the back of the board. Install with capacitor…
This was migrated from my Thingiverse profile and is from 2016. Hot end heat sink enclosure and ducts for Ormerod 2 quick-set dual-nozzle setup with dc42's improved differential infrared height sensor board . A removable shutter allows…
Based on the parameterized rugged box design from Whity I made this remix to fit 2x Dyson DC31 Batteries snuggly with a divider and a bit of a taper to slot them in. This is for my spare batteries for my old (but still going strong!)…
Just pop out the old lever, and install this new one. For best results, wait until the original one breaks. Print instructions Print with supports, because of the little axel bit that overhangs. I printed this with PETG because I hear…
I have a DC41 and I found the upper side cyclone gasket that someone had made but could not find the second underside gasket so I modeled one. Hopefully it helps someone else. Print with TPU
My dust collection setup features DN75 tubing at its base. Recently a DC4 shopvac fell into my hands for cheap and I like its power and compact size a lot. It does, however have a 90mm opening. This adapter allows those cheap DN75 tubes…
A simple heavy duty wall mount holder for Dyson DC series cordless vacuum cleaners. A recess holds the power cord just in place. Just store your Dyson and forget it until next utilisation. Tested with Dyson DC34 vacuum cleaner. It's the…
I broke the mechanical switch so i had to act ,.. Print Settings Printer Brand: Ultimaker Printer: Ultimaker 3 Rafts: Doesn't Matter Supports: Yes Resolution: 0,1 Infill: 80% Filament: Yes PLA, CPE, PETG Maximum importance !!! Category:…
Micron 3DP - DC42 IR Sensor Custom Section Category: 3D Printing
Gasket for Dyson DC41 Cyclone. The foam gasket is prone to failure resulting in a loss of suction. Replacement foam gaskets are available to buy online but there's no challenge in that so thought I'd have a go with printing flexible TPU.…
A wall mount to hold a Dyson DC44 (or similar) equipped with a battery adaptor.
