32 models
Sliding Cleat Style connector that utilizes the 'Big Thread' holes on Multiboard tiles. This BigThread remix is designed with a unique Octagon Inset making use of any of the Multiboard Push Fit Hooks or Push Fit Pegs as a screw driver.…
This is 3D printable model of the Declaration Class XCV-330 Enterprise from the Star Trek. It is a kit. The different colored parts are separated for easier printing. Pieces of some details need to be separated into separate models in the…
Basic sideclamps for holding materials on a CNC table with a star knob using a ¼" or 6mm hexagonal bolt. Print layer .20, 15% infill in tri-hexagonical and aleatorial seam for strenght, 3 walls. You can use a washer and a bolt to keep…
This is a model of the chute and declumper for the DF64P espresso grinder. You habe to “pre Bend” the declumper to have the optimum result like in one of the pictures. I recommend PETG with a layer height of 0.12 and 100% infill. I would…
This is a card case with a clean silhouette. It opens with a sliding mechanism and closes securely with a slight click. Since it has a stopper, the slide will not fall off. There are three size variations in height: 10mm, 15mm, and 20mm.…
3D printable version of this declumper for the DF54 that prevents clumped grinds from making their way into the chute. I printed this in PETG and after a few weeks of use it's been a considerable improvement over the (bent) plastic sheet…
I haven't had a chance to print this but I have included two different base models that use the SlideCleat on the Multiboard. I think the clearances should be good. If you print this submit a picture and let me know if I can use it
I was getting some clogs and kept having to take apart the extruder. The small needles were not helping and when I googled a tool for it there was a Declogger tool called NoClogger. It was €10 but then €16 for shipping!!! Pfft. Not gonna…
I had some sideclicks sitting around that were meant for Firesticks, but have since moved on to Google Chromecasts. I know they sell new ones that are white and fit perfectly for 28$, but I already had one sitting in the drawer just…
Multiboard organizer for drill bits using the SlideCLeat System
Made a holder for the sideclick's original mounting points. It's intended to have some adhesive foam inside the cradle, but the sideclick attachment seems as good as factory. I designed it to be oriented almost vertically, so there are…
This is a Klingon inspired badge/thing with a custom declaration. Was printed on Geeetech A10M. Print Settings Rafts: No Supports: No Resolution: 0.2 Infill: 20% Filament: Generic PLA Gold/Silver Notes: Printed at 200% as I was using up…
UPDATE 7/23/2020 I've revisited this design and made it so that it can now be printed in pieces. This has MANY benefits. It prints in less than half the time, it no longer needs supports, and I believe that the pieces are all stronger…
Adapter that allows the Sideclick remote control to attach to the newer triangular shaped Nvidia shield remote control.
This is using the slidecleat to attach it to the Multiboard
John Hancock, Benjamin Franklin, John Adams and Sam Adams so far. Just a project idea. Feel free to contribute with other signatures if you have time. SVG is a little sketchy. Let me know if you have a source with little clearer text.…
These are designed to click onto the factory SideClick mounting tabs, and fit snugly onto the Roku Voice remotes. They are designed to print with no supports, with the flat on the bottom of the remote flat to the bed. Simple, strong,…
This is a rework of my previous shelf. It will fit on the Multboard with the Slidecleat
If you find my designs useful, please consider sending a tip . Update Nov 2025: Added a 2nd version which has recesses for adding an o-ring - Images online seem to show early versions of the mount used an o-ring, later ones like mine…
I liked the idea of this cable guide from skislalom1. Since I pack up and move my telescope mount regularly, I wanted to be able to remove or place the cables quickly without needing to cut or replace a zip tie. Yes, there are reusable…
I had a sideclick that was used with a roku but changed over to Chromecast with Google TV and I didnt want to buy the google remote version of the sideclick so i made one. Its a two part build with the blank side that can be used if you…
Very basic remix with an added hole to run declogging pins, etc. without needing to remove the guide to do so. I ran mine with support, but I'm sure you can go without it if you run the overhangs slow enough? I'm a beginner so don't take…
I wanted a dummy attachment for my Sideclick - and... voila Category: Other
The Creality nozzle declogger is a great tool that's available for very little money. The idea is that you poke this thing into a heated nozzle and boom, it declogs things. Unfortunately it doesn't come with a cover or a sheath or any…
just needs a 1/2-20 heat insert to screw into the declination bracket. and 4 10-32 pan head screws to attach to the middle ring of the hadley telescope print with at least 4 perimeters for strength
Battery Connector replacement. Replaces the original contacts with easily available ones that come along Hailong 4-pin connectors. Fits the original battery holder with 8.0mm pin-to-pin pitch. You'll need to order Hailong connectors like…
Replacement of missing declination axis end cap for Celestron Advanced VX (AVX) mount. I'm working on restoring a Celestron Advanced VX Mount that is missing many parts and decided to share the models. The rest of the models from this…
With wireless devices and docking stations everywhere, desktops can quickly become cluttered with cables. This cable management holder is designed to tidy up your workspace and make desk cleaning a breeze. This also has a changeable…
If you find my designs useful, please consider sending a tip Update Nov 2025: Added a 2nd version which has recesses for adding an o-ring - Images online seem to show early versions of the mount used an o-ring, later ones like mine didn't…
I had a sideclick that was used with a roku but changed over to Chromecast with Google TV and I didnt want to buy the google remote version of the sideclick so i made one. Its a two part build with the blank side that can be used if you…
