Counting matching models…
Here is my personal interpretation of the Star destroyer. I made this model to fit with my previous resurgent class star destroyer. Once finished this model is 53cm long. The model is designed in several parts to avoid to have support…
Print approx. €7.37–€9.00 excl. taxPreliminary estimate for one variant
Link to improved version A replica of an Imperial I-class Star Destroyer as seen in A New Hope and Rogue One. Print instructions Scale is at 1:1,000. Unless you want a 1.6m long print, you should probably scale it down first. I printed…
Print approx. €6.91–€8.44 excl. taxPreliminary estimate for one variant
Wow, another awesome model from the guys over at https://3dwarehouse.sketchup.com/index.html Print instructions Category: 3D Printing Tests
I have been fascinated by stealth, tumblehome ship designs, of which the Zumwalt-class destroyer is one. I couldn't find a model of one that seemed to be suitable for FDM printing, so I figured I would give it a shot myself. The model…
UPDATED 2025/1 - Thruster aligner spikes and joint pieces modified for a better fit Remixed Venator-class Star Destroyer optimized for easier printing: split into 3 main parts with minimal support needed. Joints are designed to be glued…
Found a low detailed model called chancellor star destroyer so I did some digging and found this one consistent side view, so I decided to try to remake it. Ended up using a valiant as the base and built it up with pieces of veragitor and…
I noticed a saddeningly small amount of models online for the Arleigh Burke destroyers, and so I decided to simply do it myself. This is the flight I variant of the destroyer, and whether or not I'll make the models for the other flights,…
Resurgent class Star Destroyer completely redesigned (around 250 hours of cad work) to be printed in several parts at scale 1:3000. Once finished the ship is 1 meter long. But why 1:3000 scale ? Because I had the crazy idea to print…
This is a 92mm long Omega Class Destroyer from the TV show Babylon 5. It is in scale with the Revell Babylon 5 Station model. It has some very fine detail and would be best printed at 0.05mm or finer. Make sure you print 2 of the outer…
Here's a simple generic "all gun" destroyer model (self-designated Bantam-class), I designed as an exercise in learning FreeCAD. The turrets are print-in-place and can rotate. Just wiggle and twist them after printing to free up the…
this one is printed in 50% of an actual size, if ladders broke off, i included two ladder models to replace them
for the game I am making its a destroyer enjoy :)
UPDATED 2025.01 - Thruster aligner spikes and joint pieces modified for a better fit Remixed Venator-class Star Destroyer optimized for easier printing: split into 3 main parts with minimal support needed. Joints are designed to be glued…
I've printed this successfully at .2mm layer height with a .4mm nozzle. The supports were hard to take off, would probably be easier with a .2mm nozzle.
print it. the holes on the sides are really hard to get supports out of.
A lego star destroyer made with lego which is bigger than normal Legos. You can change the size of the pieces in PrusaSlicer. Can be printed in one or more colors. Some pieces don't fit together very well, so you can use glue.
The way Americans can test/benchmark they're printer just why don't have machine guns and cannons on a boat
Doing my thing of finding great models and loading them with detail. Printing now and will post. For FDM or SLA. Working on a stand. **Not STUDIO accurate, just a fan edit.
Found a low detailed model called chancellor star destroyer so I did some digging and found this one consistent side view, so I decided to try to remake it. Ended up using a valiant as the base and built it up with pieces of veragitor and…
Here's a simple generic "all gun" destroyer model (self-designated Bantam-class), I designed as an exercise in learning FreeCAD. The turrets are print-in-place and can rotate. Just wiggle and twist them after printing to free up the…
From Star_Wars Legends the Eclipse Star Destroyer was the Emperors New Flagship upon his return six years after the battle of Endor. The Ships super laser was two thirds the power of the death star, able to crack the crust of a planet,…
[Updated] After printing version 2 I found that it did not assemble as easy as I wanted. I also was not pleased with the textures on the hull. So Version 3. Older Files still available. Several years ago I attempted to make a Eclipse Star…
A beautiful multicolored painting of a Tank destroyer Jagdpanzer 38(t) Hetzer on the wall or window. The Jagdpanzer 38 (Sd.Kfz. 138/2), originally the Leichter Panzerjäger 38(t), known mostly post-war as Hetzer, was a German light tank…
This one really is just for fun, I saw a post lamenting the lack of Armada scale/ style ships from the Thrawn's revenge series so I decided to take a stab. In this I am attempting to split my models into more pieces for better printing.
Although there is nothing official about this ship, It looked interesting so I made one. Designed for use with an armada style stand.
Dimensions Length Width Height 1:10,000 scale 160mm 103mm 56mm Version Appearances Ship Stand Imperial I-class A New Hope, Rogue One print_sw_isd_ISD_I.stl print_sw_isd_stand_ISD_I.stl Imperial II-class The Empire Strikes Back, Return Of…
A model of the Vengeance super star destroyer from the Star Wars: Dark Forces games. This Miniature is partly based on the version of the ship used in the Thrawn's Revenge mod for Empire at War. That design was made by Oseritzel and…
This is the City Destroyer, an alien spaceship from the 1996 Sci-Fi movie Independence Day, starring Will Smith. The aptly-named city destroyer was a massive spacecraft used by the Harvesters in the War of 1996 to attack Earth. This…
For 3D printing nerds, hobbyists, and modern naval enthusiasts alike! This is the second model in a series of cartooned versions of modern naval warships. The Zumwalt class destroyer is the US Navy's futuristic behemoth of a destroyer;…
slightly off topic, but still worth sharing, i thought. (let me know, if there is a website similar to printables, only for laser cutting or cnc stuff)
Introducing the Dicey Destroyer Tile! When the trigger gets activated, roll a six-sided die and destroy the tile adjacent to the number that was rolled. If the space that was next to the number is empty, destroy the dicey destroyer tile…
Star Wars Themed Christmas Tree Topper/Star: Years ago I found something similar but it was all in one piece and I was limited by the size of my printer, It didnt have enough room to add lights to it. Each Section is in halves, therefore…
Zumwalt Class Destroyer with Railgun at front. This is a work in progress. Suggested Parameters: Supports: Yes Rafts: No Material: Doesn't matter Infill: Doesn't matter
A simple Navy Destroyer that requires no supports. Just print two of the turrets and glue them in place. Infill of 5 or 10% is plenty.
Welcome to my second printable kit! Destroyer Shimakaze! This model is based on the Shimakaze model in the game World of Warships. Like my previous work, this is a complete remodel, now with additional features and model improvement while…
A decoration piece for Star Wars fans. 1+ meter long version will be uploaded soon! More Star Wars model in my profile, check them out!
Print with supports as you like, glue together at the end. Thanks to the original designer. While I did make some changes, this was just to suit my own wants related to support profiles and the original model itself great.
In a galaxy not so far away, the classic Benchy got a serious upgrade. The Benchy Star Destroyer combines the familiar curves of everyone’s favorite 3D printer test boat with the angular might of a Star Destroyer. It’s the perfect blend…
This print uses 3 unique filaments Swap Instructions: Start with Black At layer #14 (1.2mm) swap to Jade White At layer #25 (2.08mm) swap to Yellow for the rest.
Not gonna lie this is a tough print with plenty of overhangs and bridging however I have designed it so the only section that strictly needs supports are the rear engines so I reccomend placing them yourself. Infill: 10% - 30% Layer…
Star Wars Imperial II-Class Star Destroyer Wall Art / Wall Decor Original Version → ~224x115x2mm Max Version → 245x246x3mm
An updated version of a necron destroyer proxy that I found on cults
Print PIN with PETG or ABS and 100%infill
Winnie the Pooh reimagined as a fierce warrior, wielding two swords with courage and honey-fueled fury. Tree Supports on build plate only Partially Powered by image-to-3D from MakerWorld (https://makerworld.com/makerlab/imageTo3d)
A 3D-printable model of the demon destroyer sword from black clover made by commission and allowed to publishThe model is designed for printability and strength and contains both a full model of the sword as well as one split up into 7…
Light tank destroyer on a unified chassis with other versions of the LT category. The tank is fictional, but you can see some features of real tanks.
It's an Imperial Star Destroyer from Star Wars, but in Pride colors. The coloring is from the Intersex-Inclusive Pride Flag by Valentino Vecchiette , which itself is based on the Progress Flag by Daniel Quasar . There are three version…
Fits nameplate with slots sized: 4" Wide 5/8" High by 1/16" Depth (89.5 mm wide, 15.875 mm high, 1.52 mm depth or 4" Wide 1" High by 1/16" Depth (89.5 mm wide, 25.275 mm high, 1.52 mm depth) Multiple build plates in the .3mf offer single…
My 3rd attempt at making this work better. The previous version printed well, but I did not like the hull texturing. Also thought that it would print better in more pieces. Added Planetary Ion Cannons. More surface turrets, More landing…
Additional modules to convert the 28mm Crassus tank to a Destroyer Tank Hunter like vehicle. Both the Laser Destroyer main armament and a Vanquisher Main Battle Cannon is provided. In addition, the Vanquisher barrel can be removed to make…
Build your empire one ship at a time with this scaled up Mini Star Destroyer! Scaled up to 250%, this is the first model in a series I'm making to create a whole scaled up mini star wars fleet! Supports are optional for all parts except…
Oppenheimer quote from the Hindu sacred text the Bhagavad-Gita Category: Other
Destroyer from the movie Thor It's better to print more because it's hard to tear the supports off by hand.
No need to tighten your grip and let more Falcon tubes slip through your fingers with this stylish Imperial Star Destroyer 15 mL conical tube holder. The base and the top click together (it's a snug fit but it's nice and secure once…
I took the time to assemble the necessary parts for the Lego Star Destroyer 30056 using ChatGpt. I found many of the parts this way, but I had to design a few myself. The project includes all the required parts. You can find the correct…
Includes 3 different versions. 1 designed for SLA/Resin printing. 1 designed for Filament printing 1 designed as a split model with alignment pins for printing it large
For 3D printing nerds, hobbyists, and naval enthusiasts alike! This is the third model in a series of cartooned versions of modern naval warships; the DDGX, which is a concept for the US Navy's next generation of destroyers. In the…
I've printed this successfully at .2mm layer height with a .4mm nozzle. The supports were hard to take off, would probably be easier with a .2mm nozzle.
A simple stand made to display Star Destroyer models. It is made for a 50 cm long Destroyer but can work with anything as long as it scaled properly.
English : A connector that you can use to connect the shoulder and arm of the "Tamashii Nation Atlas Destroyer" figure. Français : Un connecteur qui sert à relier le bras et l'épaule, pour la figurine "Tamashii Nation Atlas Destroyer".
print it. the holes on the sides are really hard to get supports out of.
A lego star destroyer made with lego which is bigger than normal Legos. You can change the size of the pieces in PrusaSlicer. Can be printed in one or more colors. Some pieces don't fit together very well, so you can use glue.
Mini sized model of Arleigh Burke-class Destroyer. Its design is based on Flight III. Supports are needed for printing.
ISU-122 1:100 scale model Soviet heavy self-propelled gun built on the IS tank chassis and used during World War II as a powerful tank destroyer and assault gun. All parts are arranged on a flat card and can be easily removed and…
The way Americans can test/benchmark they're printer just why don't have machine guns and cannons on a boat
Have fun to make nad paint it prints perfect without support see image CURA 75deg max you can print in multicolor Color change nad just paint the Hair PLEASE see the other GAME stuff i got in HERE AND Please leave a like after download!…
Doing my thing of finding great models and loading them with detail. Printing now and will post. For FDM or SLA. Working on a stand. **Not STUDIO accurate, just a fan edit.
Print in place Tank Destroyer vehicle for miniatures, wargames, classic plastic army men, and more. Feel free to scale it up or down to match your preferences. The wheels can spin when printed at larger scales, but results may vary.
Star Wars - Vehicles - Imperial Star Destroyer
“This shell was built for war.” MODEL: DESTROYER SERIES: LOCUS DESTROYERS are designed for aggressive conflict resolution. They are military-grade tools of war engineered to seamlessly integrate a mobile combat suite, providing a RUNNER…
Jagdpanzer IV Tank Destroyer Model Scale: 1:72 The Jagdpanzer IV was a German tank destroyer used during World War II, known for its low profile, sloped armor, and powerful anti-tank gun. Built for defensive and ambush combat, it became…
Elefant (Ferdinand) Tank Destroyer Model Scale: 1:72 The Ferdinand, later renamed Elefant, was a heavy German tank destroyer developed during World War II. Known for its massive armor and powerful 88 mm gun, it was designed to destroy…
![Christmas Death Star with Star Destroyers [updated]](https://media.printables.com/media/prints/1094427/images/8275006_e22b69a3-4684-41a9-a4eb-9657efc12f39_4d9bfe76-9a1f-4692-972c-6a2d5f69f210/star3.png)
