Counting matching models…
This is a system for draining All® detergent jugs. As these bottles are large and cumbersome with an offset lid, the upper bottle is held at an angle to ensure complete draining and stability. Assembly The straight tube goes on the…
Print approx. €2.06–€2.52 excl. taxPreliminary estimate for PETGSource material: PET
Place this little bin near your washing machine to have detergent pods handy. Designed to hold about a dozen detergent pods (e.g. tide pods) at a time. Hooks fit on standard wire shelving. Included files with and without a decorative…
Print approx. €7.25–€8.86 excl. taxPreliminary estimate for one variant
(deutsche Beschreibung weiter unten) English: Description: This practical adapter allows you to connect two detergent bottles to cleanly and completely transfer the remaining detergent from a nearly empty bottle into a (nearly full) one –…
Searched for one and didn't find anything, so I made one. No support needed if you print bottom up. I used white filament as that's all I had but it would look cool in clear filament. Infill at 20%.
Detergent spoon in 3 sizes for a detergent with an approximate density of 0.577g/cm³ (e.g. Calgon 4in1). 13g spoon holds ca. 22.5 ml 25g spoon holds ca. 43.3 ml 38g spoon holds ca. 65.8 ml With integrated holder so you don't loose the…
General: A simple print for transferring Tide laundry detergent remnants to a new bottle. Why I designed this: I designed this as an entry for the detergent contest. Eventually I will be adding more sizes/brands, but don't have any others…
Reference the original project for more: https://www.printables.com/model/673331-laundry-detergent-cup-drain-remodeled
Description Ever accidentally broken or lost the cup that comes with your large laundry detergent? Look no further, this 3D-printed replacement should get the job done. In most cases, it should also be able to snap back into your large…
Update: 31 Jan 2026 added half-size version My brief was to create something to replace a dish that fills with water and soap next to the sink, with something that will drain away and allow the bottles etc to stay dry This prints in two…
I buy laundry detergent in 9 kg bags from a local manufacturer. I solved the problem of keeping it dry and dispensing it from these bags using a 3D printer. The internal design of the funnel took several attempts to ensure that no…
This is a complete re-build of the laundry detergent lever by PeaRidgeHillbilly. I think that the little button on the top of the laundry jugs spouts are hard to push, and this idea was great. Many have arthritis, and find ordinary items…
Print upright. PETG or PLA. 21.6.2025:I moved the text to the left and right side. It is easier to read for left and right handed people. Other laundry helps Please finde also my scoop for detergent powder:…
In our house, we loathe wasting money on liquid detergents that cost as much as a box of powdered detergent, and clean half as many loads. This dispenser was designed to hold our detergent in a closed box to alleviate some of the humidity…
The Detergent Funnel is a practical helper for washing machines installed in tight spaces, such as closets. It combines a measuring cup with a funnel , making it easier to pour detergent or conditioner directly into the machine’s drawer…
In printed with PETG with 0.2mm nozzle. Print without support. Check and clean the printed object properly to prevent damaging textiles. Other laundry helps measuring cup for liquid detergents:…
Description Ever accidentally broken or lost the cup that comes with your large laundry detergent? Look no further, this 3D-printed replacement should get the job done. In most cases, it should also be able to snap back into your large…
Update: 31 Jan 2026 added half-size version My brief was to create something to replace a dish that fills with water and soap next to the sink, with something that will drain away and allow the bottles etc to stay dry This prints in two…
Cupholder + Ring for wall or cabinet No Support, with screw holes 0.4mm Nozzle PETG , Infill 5-10%
Print, in two parts, slot front panel into channel on front, add a few drops of super-glue for extra strength/stability.
Detergent Powder Container & Dispenser Practical container with integrated mechanical dispenser for powder detergents. Enables clean, accurate, and repeatable dispensing. Suitable for placement on a washing machine, shelf, or in a…
(WARNING) ONLY IMAGE IS AI NOT THE MODEL!!! IMAGE WONT ALWAYS SHOW MODEL AS IS, SO THERE MIGHT BE SOME MISTAKES ON THE COVER IMAGE NOT THE MODEL!!! Best use on
Please don't eat the pods! Try this recipe I found for making your own dishwasher pods at home here: Homemade Dishwasher Pods: How To Make Your Own Dishwasher Pods Alternatively, you can follow your own recipe or find one you like by…
Samsung washing machine liquid detergent guide (3D Scan)
Device is very straight forward. I printed at .2 layer height with a .4 nozzle using Sunlu fast PETG.
Generic scoop for powdered laundry detergent with fill lines for Large, Medium, and Small loads. Print with 50-100% infill for maximum durability. Designed for transparent filaments, I used Sunlu natural PETG. Use tree supports!
Einfach Waschmittelbox für 2kg Beutel, wie man sie aus den üblichen Discountern kennt (Aldi, Lidl ect).Die Boxen, die ich hier oder bei thingi fand haben mir alle nicht zugesagt. Entweder unnötig kompliziert designt oder viel, VIEL zu…
Laundry liquid detergent cup holder with raised rim to help keep the cup from falling off. Should print without supports.
So, my mom wanted one of these, and these do exist, but all of em are just too expensive (minimum 100$). So yk, I built one myself that I can 3d print (once I get my printer :P). So basically, its a storage box, or as I like to call it,…
Liquid detergent tray (for clothes washing machine) Manufacture/model: Whirlpool Cabrio Manufacture Manual Notes: Manual states that for liquid detergent you need this liquid detergent try and for powder detergent, to remove it. Without…
This is a Mason jar drain lid designed to let laundry detergent measuring cups dry between uses. The cup sits upside‑down on the lid so leftover detergent can drip back into the jar instead of pooling and hardening. The model comes in two…
Searched for one and didn't find anything, so I made one. No support needed if you print bottom up. I used white filament as that's all I had but it would look cool in clear filament. Infill at 20%.
You can screw one container of Frosch detergent to another one
The release nubbin on our washing liquid tray wore down and no longer latched. This glue-able collar raises the clasp and adds some structure to the bottom side of the original part. You could also repair this with building up a profile…
Il est costaud, il est simple et il fera votre bonheur :-D (réglages et filament utilisé, voir les photos)
Should hold approximately two packages of laundry detergent sheets cut in half, specifically the ones from EarthBreeze.
3D Printing a Replacement Detergent Cup | No Supports Needed! I 3D printed a custom detergent cup in this video after losing the original one. I’ve designed the cup to be printed in two sections to avoid using supports. Once printed, I’ll…
Not exactly a remix, but a holder for this spoon.
“Laundry Bottom” file from source model needed a bigger opening to accommodate Tide detergent lid
I needed a detergent cup to measure 35 ml so made this. The cup can fit about 60ml of liquid but I made a line at 35 so it is easy to see when there is enough detergent. The good thing with this cup is that it doesnt spill. No drops on…
The name “DAWN” in a fun, popular Dish Detergent logo shape. Internal channels for routing a LED strip. This please disable “Print thin walls” in your slicer. This is a one-off design, expect to use a fair amount of super glue to assemble.
I needed a scoop for some powder detergent, couldn't find one I liked so designed my own. Prints without support in the orientation shown on the print bed picture. I used PETG and it's holding up nicely. Thanks to some lovely printers…
This is a laundry soap dispenser holder if you don't have a shelf to put it on. This was designed for the larger Kirkland (Costco) brand dispenser. Category: Household
The wall base is perfect for fixing with double-sided tape. can be printed with PLA or PETG.
Siphon liquid detergent tray for washer Two tray dimensions Normal Short/wide Printing No supports needed. Print backside down as shown below Example Generic white PLA. Sizes Normal: Short/Wide:
Simple holder for dosing caps that come from the detergent and fabric softener bottles. The diameters for the holes are 32mm and 37mm which fits the bottles I've used. Let me know if you need a model of different size.
Laundry/kitchen detergent scoop. Holds 30ml. Has a nice sturdy handle and sharp corners for getting into corners.k
Hungarian cleaning/detergent brand. This was the original/official logo. --- Resizable: YES --- Original Designer: János Kerényi - Year: Unknown
Just a 2 Tbsp laundry scoop. Small and easy to print.
A simple scoop to measure the amount of dishwasher detergent. I use this scoop to track how much detergent I shall use for prewash and the regular program without needing a scale. This scoop is calibrated for the cheap brand of detergent…
Brought this pump off Amazon to dispense washing detergent from a big 5L bottle. Didn't fit, so made this adapter out of PLA. Learnt how to model the threads using these links…
A simple two part shovel to filter liquid or fine substances. I used modifiers to use the infill as filter Mesh and I recommend something below 30% infill for the modifyer.
Fusion 360 file included. I didn't like other designs because some of them were a single piece and others took a lot of filament. You should be able to change the parameters in the file, I'm not sure how well the model will hold up if…
This is pretty self explanatory, I live in a large house and discovered someone was using my laundry detergent without my permission, I thought this would be a lot more effective than a passive aggressive note or something. The lid for…
This is a funnel specifically designed to fit the detergent tank opening of Kärcher pressure washers , particularly the Kärcher K4 . The funnel is shaped to fit snugly into the tank , making it easy to fill without spills. It also…
Cup for liquid laundry detergent with pour spout. 3 level markers inside cup. Add a length of wire to form a loop to hang from the dispenser valve. This project was an effort to improve on the cups supplied with the detergent, which are…
Detergent scoop A simple detergent scoop with a hook perfect for hanging on the detergent jar
This is a complete re-build of the laundry detergent lever by PeaRidgeHillbilly. I think that the little button on the top of the laundry jugs spouts are hard to push, and this idea was great. Many have arthritis, and find ordinary items…
Print upright. PETG or PLA. 21.6.2025:I moved the text to the left and right side. It is easier to read for left and right handed people. Other laundry helps Please finde also my scoop for detergent powder:…
This is a remix of a Tide and Gain jug/bottle detergent cup holder. Mine recently broke so I added some supports so it could be printed in PLA or any other filament than TPU. It didn't need supports. I printed it on my Elegoo Centuari…
This is a remix of a Tide and Gain jug/bottle detergent cup holder. Mine recently broke so I added some supports so it could be printed in PLA or any other filament than TPU. It didn't need supports. I printed it on my Elegoo Centuari…
This Laundry Detergent Drip Tray mounts on the shelf below the spout of your laundry detergent to catch drips . The mounting clips slide onto a shelf up to 13/16" (21mm) thick and can be screwed into place if desired. It is intended for…
This is a simple and effective holder for your laundry detergent cup. Just put it around the nozzle of your laundry detergent and your cup becomes hands free. I would recommend printing with model lying on the back. It will need less…
🧼 Detergent Wash Cup – Clean & Easy Powder Scooping! This detergent scoop was designed to make powder dosing simple and mess-free! With its ergonomic handle, you can easily grab and scoop detergent without spills or sticky packaging.…
Laundry detergent sheets are a convenient way to clean your clothes without all the mess of liquids or powders. This convenient pocket pack lets you safely and securely transport laundry sheets when traveling or camping or just heading to…
My wife saw this on YouTube and asked if I could make something like that. What a question :)....I have a 3D printer, I have filament....of course I can :) And I made it :) I don't know if it's really successful, but she's happy with how…
Designed in Fusion, a hanging shelf for the detergent measuring cup of a 150fl oz Tide (or similar) detergent container to catch drips and easy hold while measuring. It should fit any bottle of this type where the ring it sets onto is…
Detergent always spills down the side after pouring. This catches it in a convenient tray, reducing cleaning. 2 sizes
🧼 3D Rotating Dispenser for Liquids – Organized, practical, and sleek! Say goodbye to messy bottles: this clever 3D-printed rotating dispenser lets you organize up to 4 different liquids in one compact, tidy module. Thanks to its rotating…
This Detergent Cup Hanger is designed for practical laundry organization. It snaps onto standard wire shelves or pipes and provides a round tray to hold your detergent cap or measuring cup right below the spout of your detergent bottle.…
Printed in petg, faces offset .15mm each, and may seem too loose at first but will snug up for a friction-fit when placed on the detergent dispenser. Designed to fit Tide 150-170fl oz containers and or similar brand/sizes. The opening is…
My table washing machine has a square compartment for 8g of washing detergent. I created this scoop for a quick and easy way to get the needed detergent in a single scoop! The print should be printed with the scoop opening on the build…
🇬🇧 ECOVACS T50 Detergent Funnel – No More Spills! This custom-designed funnel fits perfectly into the detergent tank of the ECOVACS T50. It allows you to pour cleaning fluid easily and cleanly, avoiding splashes or messy overflows. Tested…
Print it, fill it, throw it. Fill this pod with a maximum of 35ml of any washing machine liquid you want and throw it in the clothes. That's it. Foamex will slowly release the washing machine liquid as the clothes are being washed; it's…
cap for my laundry detergent jar. a cap with an inner diameter of 136.5mm and you put it on like a cap
This is a replacement cap for a dishwashing detergent bottle utilizing the 45mm wide mouth design, this should work for all of the 75oz cascade bottles and any other detergent that uses the same cap design. This print makes it easy to…
Print with the flat side that has holes facing down, it's set up that way for an easy support-free print. Otherwise use support for best results.
If you print this model, please share pictures! Your feedback is highly valued. Consider following & liking if you enjoy my work! --- Smart Detergent Powder Enclosure with Scoop Holder Tired of messy detergent? This 15 cm x 20 cm…
You will need Three M4*6mm screws to assemble. Two for hinge's, one for handle. Door has built in printing supports. FOR PERSONAL USE ONLY! THIS FILE CANNOT BE SOLD OR DISTRIBUTED FOR ANYTHING OTHER THAN PERSONAL USE!
A simple, no-frills 3D-printed stand that holds laundry detergent bottles at an angle to reduce waste—easy to design, fast to print, and solves a common everyday problem with minimal material.
Drainer for ALL detergent cup to prevent the sticky buildup from forming in the cap. This threads on in place of the vent cap. and prints as 3 parts, the support blocks have a ~.1 mm gap between them and the actual object, use variable…
This detergent measurement cup has three measurement divisions for e.g. water hardness or level of soiling of the clothes. small: 25g/40ml medium: 60g/90ml large: 120g/150ml Print settings Height: 0.2mm Infill: 15% Support on build plate…
Simple, yet durable detergent spoon/scoop for big packs with spikes to brake piles if detergent become solid. Works fine with PLA/PETG. No supports needed
if you print this model, please share pictures! Your feedback is highly valued. Consider following & liking if you enjoy my work! --- This is the long handle version of model I made here Key Features: convenient 15ml, 30ml, 45ml, and 60ml…
I was tired of the laundry detergent running low and not coming out of the handy little pump anymore, so I designed this. Simply glue the legs to the plate, add the optional TPU grip plate, and off you go! Tips: Supports not needed Use CA…
My first attempt with PLA was not stable enough for me, so I printed it again with TPU for AMS. This made it perfect, and the slight flexibility makes it very easy to handle. It's also great for potting and repotting plants. The model is…
This is a 3D printable measuring scoop designed specifically for laundry detergent powder. Its ergonomic handle and slanted design make it easy to scoop and pour detergent without spilling. The model is optimized for FDM printers and can…
works with tide and gain and Kirkland branded-all free and clear not tested other detergent bottles
This is a simple design thats using less material and standing vertically with a small footprint. This holds about a package worth of sheets or 18mm of sheets. 3 walls and 15% infill are ideal.
