Counting matching models…
UPDATE: I have now uploaded a 1 piece model (combined) as well, which is 230x75.6 so it can be printed on Prusa MK3/MK4. A 1 piece or 2 piece mount for VRS DFP controller box. I have printed the 2 piece edition with PETG on Prusa Mini and…
An easy to make speaker enclosure for a 40mm speaker. This speaker is often packed with the popular DFplayer MP3-player. The holes in the lid fit M3 countersunk screw. The holes in the box are tapped with an M3 tap. If you like my designs…
I have made a holder for the DFPlayer to be able to install this safely and the SD card but is still easy to reach. The DFPlayer is held with two M4 screws and washers in position, the holes are printed accordingly with thread and I…
Printed rest side down with full supports. Will need a M5 x 25mm or M5 x 30mm flat head bolt.
I wanted a box to store some of my batteries and found this rugged box parametric from @whity. I just modified it to reflect the Nordfpv logo and made it in a size that fits some 2S and 4S standing up, and use 25mm screws instead of 30mm…
Rumble motor mount for VRS DFP pedals (brake + throttle). Designed for Xbox rumble motors that are, in my case, connected to an Arduino Uno. Use M5x10 screws, preferably hex so it's easy to mount them, with an allen key, on the pedals…
Holder for Cuisinart DFP-14BCWNY 14-Cup Food Processor slicing disc and shredding disk as well as the plastic stem adapter thingy. Print instructions Category: Kitchen & Dining Summary Holder for Cuisinart DFP-14BCWNY 14-Cup Food…
A rugged box adapted for 1S batteries from different sizes. I created place for my 260-530 mah 1S batteries. There's 2 inserts, one for smaller batteries ~260-300mah, and one bigger, for 450-530mah batteries. You print which ever works…
I created this bracket to mount the power supply of the VRS DFP 15 Wheelbase to my simrig. Supports in the corner are necessary! Both sides can be identical.
A simple naked gopro case for the GEPRC Cinelog 25. This is designed to fit in the original base that comes pre-installed with the Cinelog Print Settings Printer Brand: Prusa Printer: I3 MK3S Rafts: No Supports: Yes Resolution: 200…
Transducer mount fits both pedals, but needs spacers on each side for the brake.
Bike clamp (34.9 mm) quick release (QR) for 70 mm wheels mounted to VRS DFP wheel base. Preferably print with 100% infill and 7 perimeters (for 0.4 mm nozzle). PLA or PETG shouldn't matter. I'm using PLA for my QRs. I use a bike clamp…
Need to print one of each mount and two of the bushings. Additional parts needed: ASC81587 Shock Kit MIP23400 Piston Kit 60W Associated Shock Oil (800cSt) 80W Associated Shock Oil (1000cSt) Starting setup: Throttle Pedal - 60wt oil, green…
After building the laser engraver by infectedfpv26, I found the Sculpfun S9 on Bangood was on offer, so I bit the bullet and purchased it. only thing then , of course the laser mount was incompatible with the S9 so I designed this.…
This is a holder/mount for the power supply unit of the VRS DirectForce Pro 15 Nm. It is designed to fit the Sim-Lab P1X Pro Sim rig but is likely compatible with most 4040 aluminum extrusion profiles. Support needed V2 This is an…
This is a remix with the base a little bit thinner than the original and adding the Nordfpv logo Print Settings Printer Brand: Prusa Printer: i3 MK3 Rafts: No Supports: Yes Resolution: 150 Infill: 15 Filament: Sain Smart TPU DOesn't…
A stand for 4 screwdrivers. The holes are 19mm
I have experienced that the original feet look good but break pretty easy when light force from above is applied which can easily happen while working on the floor on the machine. So I have made some more sturdy feet which can no problem…
Printed with PLA, 0.25mm layers and 30 % gyroid infil. Supports needed for the top. Holes are M8 spaced in 40 mm pattern to fit standard aluminium profiles. One row is for even amount of channels in the profile (e.g. 8040), the other is…
Update as of December 29, 2021: corrected some mistakes, lowered focusholder and shifted buck converter up for more clearance to heatsink, sdapted measures for long laserholder to get better clearances added a little 3.5mm addon for the…
I love the weBLEEDfpv Band-Aid tin for my lipo's, but I didn't like them flopping around inside. So I made this insert to hold 10x 1s batteries for the can.
Made this for my Elf with the UndergroundFPV Frame. Fits ok. maybe i find the Time to get it perfect. Category: R/C Vehicles
I wanted a box to store some of my batteries and found this rugged box parametric from @whity. I just modified it to reflect the Nordfpv logo and made it in a size that fits some 2S and 4S standing up, and use 25mm screws instead of 30mm…
