26 models
Case for the Apple //e testing keyboard. Depending on how your printer is setup some rework after printing maybe require. Mounting holes are for heat inserts (m3) and should be cleared out to 4.2mm but test first. the tactile switch parts…
I modelled a simple holder for the Subaru DST-i diagnostic interface which I mounted to the side of one of my tool cabinets. It has 2 mounting holes which are 25mm between hole centres, and are 6mm in diameter. I'm not sure how many…
This is a small, purpose-built diagnostic test model created to reproduce a repeatable bridge-related surface artifact observed on a Prusa CORE One. The model is intentionally simple and minimal. It is not meant as a functional or…
Commodore 64 Diagnostics / Dead Test Cartridge Case has been designed for the “ C64 Dual Dead Test & Diagnostic Cartridge & full test Harness ” designed and sold by Melbourne Console Reproductions. The LED is visible through the case and…
This is tested, and provides some protection for the leds and capacitors on a Dangerous Things RFID Diagnostic Card.
I designed this hanger/holder for Shimano diagnostic tool SM-PCE02 and cable hooks,easy access to take it out or it can seat permanently in the holder with cables attached,no supports were needed for the hooks on MK4S(printed on the back…
Please view this video by the original author to show how to print this. This tests much more than a 3d Benchy Boat. UPDATE: I was scrolling through Printables and found this attachment i thought looked cool! Please check them out! (I…
Case for the Apple //e testing keyboard. Depending on how your printer is setup some rework after printing maybe require. Mounting holes are for heat inserts (m3) and should be cleared out to 4.2mm but test first. the tactile switch parts…
This design provides a holding fixture for 3d Printed color and mono plates that are used for print quality characterization in our lab. Printer: Prusa Mini+ with Input Shaper Setup: 0.4 Nozzle; 0.2 layer height; Print Setting: 0.2…
I modelled a simple holder for the Subaru DST-i diagnostic interface which I mounted to the side of one of my tool cabinets. It has 2 mounting holes which are 25mm between hole centres, and are 6mm in diameter. I'm not sure how many…
Nebavilo mě, jak se všude válí. Takhle má své místo. Je potřeba mít pro zámek magnety 6x2x2 a pro panty 2x šroubek M3x30 a odpovídající matičku. Lepší by byla zajišťovací, ale tu nemám. Na fotce mám ještě neupravenou velikost pantu u…
I found this link and it was something I could use: https://github.com/mnh-jansson/m18-protocol/ Awesome, thanks Martin Jansson for the work you've done (C: Remember to check the link to find a TTL-Serial adapter that works with the M18…
This is a small, purpose-built diagnostic test model created to reproduce a repeatable bridge-related surface artifact observed on a Prusa CORE One. The model is intentionally simple and minimal. It is not meant as a functional or…
Stand for thick tablets (eg. car diagnostic tools, otofix, launch)
Simple slip-on cover for the Hex GS-911 OBD-II port cover. While the device comes with a carry case, this might be useful for those looking to minimise space taken up on an adventure. This is a snug fit; if the tolerances are a little out…
We at SCOPES Education care about public education on Coronavirus related issues. We wanted to help explain how the diagnosis process is being done in a simple way. The result is an analog game called virusSCOPE that uses 3D printed parts…
Diagnostic Dice for your automotive conundrums, Having a problem with a car that won’t start, grab your No Start Die. What about an overheating issue? Reach for your Overheating Die and give it a roll. We have 6 dice to help in your hunt…
Diy version of the pressure pulse sensor. Sensor - Rs components part number - 721-4944 - Murata - Piezoelectric Diaphragms 35mm. O rings were changed to flat seals.
The purpose of this tool is to gradually apply a known force to a CNC router, so that the deflection may be measured as a function of applied force. (The deflection measurement is separate and not part of this design.) This can be used as…
This is the diagnostic table that was featured in Prime's death scene: it obviously doesn't work very well, as he died. But you can relive your sadness with this two-piece model that can be printed in resin or fdm! It's a pretty…
This is a Pulse Sensor case intended for use with a cheap piezo buzzer and 3/8" ID hose. Using an oscilloscope you use it to sense changes in pressure. There are tiny ½" deep screw holes to mount the buzzer, but it also press fits fine.…
You need to print this cube:- at 0.2mm layer height on a 0.4mm nozzle (or smaller) with 0.4-0.46 line width out of a non-silk material (silk expands when it comes out of the nozzle!) The screw and rod parts snap off to test in the screw…
replace broken strap for BMW 20 pin diagnostics port (my car is a Z3). ensure you print in a material safe for the area the cap will be. one model is for TPU and another for harder plastics i recommend ASA print with enough Top/Bottom…
I made a plug that will go into the diagnostic connector to make it easier to access the pins in it. I had some 14gauge romex wire used when remodeling our basement for all of the electric boxes and lights. It was thick enough to let the…
