Counting matching models…
While the world seems to talk about eddy current based sensor probes nowadays, I still like the little PCB Klicky 🥰. So building my 2.4 I just optimized what is out there to dock the probe securely in place. Support me : Please leave a…
A Christmas Update | V4 is Here! 🎄 12/09/2024 This update marks the final version of my iPhone Standby Dock Remix, and I couldn’t be prouder to share it with you all. Creating this has been a monumental task—I went through and completely…
Here is a nice quick print based on a request from @aRoguegumsheild for his #BigBenchyBlowout a small fun stand to display a Benchy. I hope you enjoy. Thanks Bugman If you like what I am doing please consider buying me a coffee or…
A kaleidocycle that prints-in-place! No need to assemble anything; the kaleidocycle comes out of the printer bed ready to use. And no need for supports either. Enjoy! Print instructions The models shown in the photos were printed in PLA.…
Minimalistic Dock for Apple Watch - version 2. Suitable for both USB-A and USB-C type chargers. Model was tested with genuine Apple chargers: plastic and metal one. Both have similar diameter which is 27.8mm and 27.7 mm, with the depth of…
Dock. Charge. Tidy. A charging stand with built-in storage for excess cable — for a tidy desk or bedside table. Tidy cable storage inside the dock. Size-specific versions for your Apple Watch. Easy to print without supports. Choose your…
Added a free-stand base and side frames to four of those modules. Makes a nice display for available filaments and colors. The whole construction came out very stable, but to stay on the safe side I added a bunch of M6 nuts in the base to…
Dr Doom Mask - Marvel Doctor Doom Helmet - Cosplay Props - FREE STL PREMIUM STL File for 3D Printing Follow me>>>: All My Designs: https://linktr.ee/3dprintmodelstore You can support my design work by joining my patreon at here:…
This 3D model was originally created by Scott Yu-Jan and is shared under the CC BY-NC 4.0 license. You can find the original file on Makerworld: https://makerworld.com/en/models/615378#profileId-538769 License:…
Crystal Switch Dock Platform
I designed this mount so there is no risk of the dock and the switch to fall to the floor by a light tug on a cable. The hinge on the back of the Nintendo switch dock lock into place with the slots in the printed wall mount. To mount the…
I made this dock for my Apple Watch Series 4 with 44mm and it fits like a charm. I also tested it out with the 40mm version (3rd image) and it also fitted very good. It also fits all other Apple Watches (also Ultra), cause the format…
A neat box with a unique opening mechanism. Follow the original inventor on Instagram https://www.instagram.com/degreesoffreedomco And visit their website! https://www.enjoydof.com I reverse engineered this model by watching this reddit…
Looking for the perfect gift for a doctor, nurse, or medical student? This pen holder, shaped like a doctor's bust complete with a lab coat and stethoscope, is the ideal desk accessory to add a touch of professionalism and charm to any…
Subscribe Now! Very good model from basti_vapes. Remix to no support free and printed. Time-lapse print video : https://youtu.be/MKl_LkOERvs Subscribe to find out more support free 4K Time-lapse video: Subscribe Now!…
I'll be honest, I didn't like some of the current cut and paste versions of the R2D2 Alexa Echo Dot 3 docks available, some of them had a lot of errors when slicing. I decided to make a "as close as possible" screen-accurate version from…
This is a J1772 adapter dock for the Tesla Model 3. The dock is inserted into the rear of the door cubby and holds the charging adapter in a forward-facing orientation. Since the dock sits in the back of the cubby, it only takes up a…
This 3D-printed pen holder is designed as a stylized doctor’s lab coat , featuring clean folds, front pockets, and medical details like the stethoscope and name badge . A minimal yet characterful desk organizer, perfect for doctors,…
The Steam Controller needs a dock, this our my take on it. It is extremely close to the version we will release in June, except for three things: It lacks the weight to properly stay in place while removing the controller from the magnet…
This is a J1772 adapter dock for the Tesla Model Y. The dock is inserted into the rear of the door cubby and holds the charging adapter in a forward-facing orientation. Since the dock sits in the back of the cubby, it only takes up a…
A modern take on iconic Plague Doctor mask. Print instructions Fits snuggly into 250x210x210 build volume of Original Prusa i3 MK3 in one piece. Alternatively, you can print three separate pieces and glue them together. Single piece needs…
Update V1.01 : - Very tiny cosmetic adjustment, Removed the small rounded side edges on the front face as they didn't quite look right to me. It has not effect on the controler or puck fit and is purely to just make it look that tiny bit…
Introduction This is an under-desk laptop dock with an integrated ejection mechanism. Slide your laptop on the rails and plug it automatically to a Thunderbolt cable for power delivery and screen and peripheral connections. And when you…
This design is based on konseben's original design, that was working fine, but i wanted to fine tune it a bit. Print it with at least petg, as pla will melt there under load. here are the changes that i made: made it 0.18mm longer(35.62mm…
If you print at 0.2 layer height, you'll get the same pattern as in the pictures. Below 0.2, the pattern changes, and at
This REMIX Was made to fit an iPhone 13 pro and an iPhone 14 with a standard case. This may fit other iPhone models, but will need to test it at your own risk. DISCLAIMER: Please be careful when ejecting your iPhone. Always have your…
My take at a dock/display stand for the Steam Deck. The back logo is intended for adhesive rubber cut in shaped of the logo for added grip but that has proved unnecessary with testing. I have included the logo to be printed as an insert…
My sister and I came up with this design to hold her documents and papers vertically, in order to save some space on her desk and keep it tidy. The holder has four slots, each one being 10 mm wide. We also added a small tray on one side…
This is a remix of Scott Yu-Jan's iPhone Dock, adjusted for iPhone 12 Mini. For original design: https://makerworld.com/en/models/615378#profileId-538769 Special thanks to @jlf_cleaner_1966931 for the cover photo!
This is a Remix of the iPhone Standby Mode Dock by Scott Yu-Jan . I have changed the dimensions so that an iPhone 13 with a case fits (152x78mm). At the top, there’s a slot for an Apple Watch charger, allowing you to charge your AirPods.…
Update: 26.07.2024 Added “cmf watch pro 2 stand 0,2mm” with a slightly larger opening for the connector. A charging Dock/Stand for the cmf watch pro 2 Printed at 0.2mm layer height in PLA. Tree supports used for overhangs. Not sure, if…
Should not need any supports on FDM, but apply your own discretion and knowledge of your own printer :)
This is a charging station for an Apple Watch SE. It is easy to print and the charger fits inside the stand snug but not tight enough so that it will break if removed. Revision 2 has added the feature of a chamfered hole in the back to…
Just print it laying down on the face. Should take about 2-5 minutes to print. Print at .2mm layer height Have fun
Easy to print and fun to have! Features a slide and lock in Design to hold the Docking station tighter and prevents it from sliding or popping out as easy! You can split the STL's into parts for easier coloring as well if your not using…
👻Overview👻 A cute plague doctor that represents Dark Doctor Studios! This thing isa little creepy, but that is how most things are around here. He stands around 100mm tall. I would love to see a few makes of these. Orca project file, and…
Samsung Galaxy Watch 4, 5, 6, 7 & 8 charging stand printed to hold charging puck. Just insert the puck into the location and run the cable along the tracks. Depending on your print settings, the puck will be a snug fit. You may have to…
Couldn't find a printable document holder to mount on a wall, so i designed one by myself. It suits a good amount of A4 documents (or smaller). It has a honeycomb design to use less filament while still being stable enough. You can mount…
I have .3mf files with my settings I've used over at Makerworld . To split the model into each individual object: (In slicer) Right-click model → split → to object Designed for a full size ATX PSU and a dual PCIe bracket GPU GPU size…
The Airlock Dock & Stacker slide onto the lid of the PolyDryer™ Box and are held with a friction fit. The airlocks can be press fit into the dock and are also held in place with a friction fit. The Stacker version allows you to stack…
This Female Doctor Coat Pen Holder is an elegant and functional desk accessory inspired by a classic women’s doctor white coat . The design features sculpted buttons, pockets, an ID badge, and a detailed stethoscope, all shaped to reflect…
This is design is done by Scott Yu-Jan with OVERWERK. Please check out his video and credit to him for this great design. The difference is this is for iPhone only since I do not have an Apple watch, I have reduced the size for iPhone 12…
Funko pop style plague doctor character. Supports are easy to remove and hat then needs to be glued to the head.
A dock for holding my kid's Yoto Mini player and the ever expanding collection of cards. The print pictured has some personalizations, the STL file does not have the lettering or flower decals. The bottom surface of the 3 compartments…
My only options for placement of my Nintendo Switch dock were behind the TV or laying down under it. Behind the TV gave us connectivity problems with the controllers. But laying down the Switch without modifications presented several…
I decided to model Dalek from TV Show: Doctor Who, I’m aware that some details are missing, because not everyone has nozzle capable of printing small details. There are 13 stl files, every one of them is described of what color they are…
I was unhappy with the available solutions, so I designed a new adapter to attach to the dock. It replaces the backplate of the Dock and clips in. The Dock can be flipped up to access the cable connections. This adapter is useful if you…
Experience the perfect companion for your iPhone with our versatile standby dock. Charge your device and use it as a clock, alarm clock and organiser at the same time. The dock is available for iPhone 14,15,16 models - simply connect your…
The print is in separate files: - case - camera hump - dock (insert phone, attach cable than fill gaps with hot glue - this way it can fit multiple cables) - dock connector cover Print from 0,3 to 0,05 all settings work.
🦠 Plague Doctor Gnome 🦠 Straight from the darkest corners of history and the quirkiest corners of your garden—this Plague Doctor Gnome is here to prescribe one dose of charm per print ! With a long-beaked mask, wide-brimmed hat, and stoic…
This is a geometrically CORRECT Hirth joint. It includes SOURCE files and DOCUMENTATION. There are a lot of Hirth joints out there. Some are completely wrong, some are very close, but almost none of them are geometrically correct. If you…
I notice that all the Debris that falls of the nozzle lands behind the XL and also on the Power supply and Buddy Box. Ive tried to find a good way to catch all the Debris of the nozzle, that come off when the nozzle parks. Ive tried to…
I modified a version for the miband 7 found here but the author remove is design so i can't create a remix. Layer height 0.15mm for the bottom and 0.3mm for the top. Nozzle 0.6mm. Pla no support.
175x95mm base with 2 100m heights and one 140mm for larger paper
Phone charging dock. It was made to fit Type C cable. Little bit of hot glue will be needed for securing cable in place. Type C connector fits pretty snug so no glue needed there. I recommend to use sticky pads under the phone charging…
This 3D model was originally created by Scott Yu-Jan and OVERWERK. You can find the original file on Makerworld: https://makerworld.com/en/models/615378#profileId-538769. This remix of the model was made to fit the iPhone 14 (without…
This is a mounting bracket for the Dell WD19 dock. Hardware: 2x M2.5x10 socket head screws (The length is CRUCIAL! Longer screws might destroy PCB traces and kill your dock) 2x 4mm countersunk wood screw
My Iron Spider needed a villain. Enter: Doctor Octopus aka Doc Ock. Leader of the Sinister Six, archenemy of Spiderman. All parts print without supports or brims on my printer. Tentacles Each tentacle is a series of ball-socket links. I…
Make your Switch 2 fit inside your TV rack! A Nintendo Switch 2 horizontal dock stand with anti slide features. The stand gently holds the dock in place, see red arrows on photo. Possibility to add 12 mm rubber legs underneath the stand.…
After finding the original HP G5 mount and having had difficulties mounting it under my old desk, i figured i wanted the way of mounting it to be different. screwdrivers up to a width of 10.5 cm in diameter should fit the hole where the…
I made this mating connector for a Dewalt 20V battery pack so I could use it in a battery-powered project. For printability I split it into two halves and glued them together. I used ¼" spade terminals as the contacts, which can be glued…
This is a remix of a remix. The original dock can be found on Thingiverse , the author is Crispy3DPrints . The remix by tverhoeven split the model in half so it could be printed on smaller printers, it was perfect for my Prusa Mini+. The…
Unleash Your Nintendo Switch 2's Potential with This Horizontal Dock Stand! Just got your brand-new Nintendo Switch 2? Maximize your gaming space and show off that stunning 4K-capable dock with this custom-designed horizontal stand!…
Edit 9/25/2023: Per the comments, I have revised the micro SD slot to not be so tight, but snug enough to hold the sd card. Additionally, the slot will now only allow the micro SD card to go into it half-way, making it easier to pull out.…
I was inspired by Lewis2e's Nintendo Switch Dock Wall Mount , but then had the idea to remake it from scratch to use it on the IKEA Skadis pegboard, because the original holes weren't suitable for concrete screws and the author didn't…
Update 5 : Es sind 2 Versionen für den 25W Charger (+Silikoncase) online da dieser kleiner ist. Eins mit und ohne AppleWatch Charger. Finden sich im Ordner “ 25W MagSafe ” Update 4 : Eine Version für das iPhone 14 Pro, 15 Pro und 16 Pro…
doctor octopus arms that attach to dummy 13. I used 33 ball joints not including the weapon connector, but you can you less or more. 10/3: I added 4 ball joint connectors so it's much better and added sword holders for the swords from my…
This dock comfortably fits a Yoto Mini 2024 edition player with a silicone jacket. It also features a two-tiered storage compartment for cards and a channel that runs through the dock's underside to keep the charging cable neat and…
Adapted using a super primitive method to fit my iPhone 14 Pro Max with no case. Use the 20 minute fit test to test your phones fit before commiting to the 6.5 hour print. Also includes the slot for the apple watch charger on top to…
Simple to build PS5 controller charging dock that only needs 2 USB C cables and 4 M4 screws, built in fusion 360, easy print that doesn't need support material and simple to follow instructions, compact and elegant design that will look…
Assembly: Assemble as normal dummy 13, but add tentacles. Printing: for the full, Doc Ock vibe, use the AMS-MMU file. If you don't have an AMS or MMU, use the single color variant. Print frame and arms in PETG. Armor can be any filament.
Place your Switch dock in this model for a nice way to store and display your games. UPDATE: As I've accumulated a few more games, I needed to expand the cartridge storage. As a result, there are now two different models to choose from. A…
It is a MagSafe docking for iPhone 12(all series) and Apple Watch. Need M3 x 6mm (4pcs) or M3 x 8mm (4pcs) for connect the upper and lower parts.
The design consists of 4 pieces, thinking about standard printers. Compact stand for Apple Watch (44mm) and AirPods Base to make the support more stable and join it with the iPhone part Wireless charging support for iPhone. Base to make…
I customized the base of the original model by @Rocky00780 from MakerWorld to fit the base of the OLED-Switch.
A birdman medical worker with questionable values. Collect them all! Check out the FULL COLLECTION HERE: https://www.printables.com/@TripleGWorkshop/collections/2198626 Designed to print with Tree Supports on build plate only for EZ…
I designed this to support some document frames which are 9mm wide as well as a lithophane which is 4mm wide. I've included STLs for 2mm through 12mm in .5mm increments with tilt angles set 1 degree less steep for each 4mm of increased…
A replica of the sling ring from Doctor Strange.
Remix of my other stand that had the logo extruding from the front. This one was made with Hatchbox wood PLA. I really love this stuff. I took the PS Vita Stand by LordLeXaT and cleaned up the front and added a different PS Vita logo,…
This is a very simple and easy-to-print rack to hold three chopping boards for household cutting boards and devices to a maximum of about 12mm (half inch) thick, for either drying or storage OR you can customise to suit your own devices…
Want to access even more models not found here ? Interested in supporting my efforts making free models for the world to enjoy? Check out my patreon page here: https://www.patreon.com/mz4250 or support me on Printables Clubs! Patrons have…
Document file size 25x12x25cm. Firmly holds folders with papers. Printed on Bambulab P1S - 0.28mm layer, 15% infill. Pořadač na dokumenty velikosti 25x12x25cm. Pevně drží složky s papíry. Tisknuto na Bambulab P1S - vrstva 0.28mm, 15%…
🔵 Sonic Screwdriver of 9-10th Doctor 🔵 This screwdriver had the 9-10th Doctor and briefly in Season 5 the 11th Doctor. For a long time I wanted to create a sonic screwdriver of 9-10th doctor but I didn't have a time, today I finally had a…
We are excited to introduce the new model for the Xbox Series X! As always, you do not need any support to print both parts. Installation on the console is straightforward and does not affect airflow. All buttons and slots are accessible.…
Just a simple, easy to print, under-desk mount for an HP G5 USB-C docking station. No supports needed. You'll have to print two of the support pieces to hold the dock bracket.
COMMERCIAL LICENSE // UNLOCK ALL FILES DISCORD SERVER // HELP REQUESTS FILAMENTS USED // AMAZON EQUIPMENT Print both the foot-back and foot-front twice. Print with or without Apple Silicone Case Please make sure you choose the correct…
This deckbox is made of three main parts, which assemble by using 16 neodym magnets (6*3mm). UPDATE : Added some additional parts (window, top and front text panels), which can be glued (otherwise, you can try to paint the white parts of…
Fits iPhone 13 with case and supports lightning cable charger.
This is a remix of my Anker charging pad dock. https://www.printables.com/de/model/134220 This adjustable Qi charging station can be adjusted to any phone size. In addition, it is possible to charge the phone vertically or horizontally.…
Create a mysterious and unsettling look for Halloween with this detailed plague doctor mask. Inspired by historical plague doctor masks and steampunk aesthetics, the design features a long curved beak, round eye lenses, mechanical…
A wall mount for the Nintendo Switch Dock. Allows access to USB ports. Power LED is visible. Can be printed without supports except for the cut out for the LED, which I think does need some small supports (did for me, anyway). Attaches to…
This is a remix from "Nintendo Switch Lite Charging Dock" by TechnoGeek3D ( https://www.thingiverse.com/thing:3920260 ). Made it wider and extended the plug hole. You will need some supports for the plug hole. (Last picture shows the…
Based on photos and videos if the CO toy, which seems accurate to the actual prop. Made in tinkercad For people looking for better screen accuracy, I'd recommended this model Knurled rings by @Wilko, link:…
Hello everyone! I would to share with you my idea for placing Switch's dock horizontally. It's good idea, if your Switch is placed in some low TV cabinet. I also designed anti-slip feet printed out from flexi filament, whitch help keep…
Created a mount to have the HP docking station mounted under a desk. As HP have several products called “HP G4”, this model is for the HP G4 Thunderbolt dock. The dimensions of the dock are 98 x 98 x 68 mm I printed this with PLA as I…
Hey guys…it's been a while since I uploaded any new freebies! Here's one of our most popular oldie-but-goodies! Many (most) of our models are support-free for FDM and resin. Nothing to do but print and play! We do have FREQUENT…
I really like the design of the magnetic PFTE couplers and I wanted to use it for a drybox. However I don't have MMU, only one tube is used at a time. So I designed a terminator to dock the tubes when not in use. To be used with M4 screws…
- Flipper Zero Short Base(7cm) - No Text - Flipper Zero Long Base (10cm) + Text Printed in PLA Fits Flipper Zero with silicone bumper No infill required Layer Height : 0.2 / 0.28mm 5 Top/Bottom Layers 3-4 Walls Minimum Print on side with…
A simple charging dock for your Apple Watch, to your night stand or desk.
I wanted to display my iPod Classic 160GB and in Parallel have it on a Dock, so I created a small stand where you can put in the 30pin cable and charge it well. Printed with PLA and 5% infill (you could do more for stability)
