Counting matching models…
I was not satisfied with the already available lens-protectors so I made another one. This one is very slim and does not influence the general look of the sight too much. Meant for the cheap EOTech clones from China (e.g. for Airsoft). I…
All files in print orientation Multicolor Inserts: Only for the inserts I included Transparent filament until 0.5mm Filament change at 0.5mm to the reticle color For the other parts, go to: No hardware:…
la hauteur est de 100 mm l'entraxe des vis est de 45 mm le diamètre des vis est de 3.5 mm n'oubliez pas de poster vos photos de vos prints ça fait toujours plaisir !
This project arose from a personal need and is the first one I modeled. It was also one of the first I printed, as I am new to the world of 3D printing. The goal is to hang an Alexa Echo Dot on nails or screws on the wall, making it easy…
A sunshade for generic red dots. Use some double sided tape if it has too much movement.
I made an Alexa Echo Dot 3rd generation wall mount. No Supports needed
He likes to hold your toothpicks, put him on your platter! This delicious little Pee Wee Pig dances his way from a life on the counter to an oh-so-delicious position in your kitchen drawer! Based off the original Japanese Ceramic jar from…
I was not satisfied with the already available lens-protectors so I made another one. This one is very slim and does not influence the general look of the sight too much. Meant for the cheap EOTech clones from China (e.g. for Airsoft). I…
Because my Picatinny rail was too short and the standard off-the-shelf Lens-Protectors did not fit, I designed this shorter version. (mounted on a Tavor T21) The lens is taken over from the normal lens protectors that can bought e.g. on…
This is a remix of the Thin Man by Tosh (thingiverse.com) using LEGO Compatible parts [v1] (120+ parts) by Snity . Print instructions: Infill: Recommended 15% Supports/Brims: Only needed supports in sitting
Since the Pit Viper does not come with a proper mounting for a red dot i decided to make my own. It uses the existing screw that is used to adjust the rear sight, this way no extra hardware is required for mounting. The Red Dot screws tap…
A non-magnifying acessory for a red dot optic to make it look like a hooded scope. Aesthetic only - does not magnify Should fit most red dots with an external diameter of 27.85mm. Scope itself is 30mm so it should fit in other mounts
Nach der Idee eines anderen Users habe ich erst einen Halter für die Standart Kleiderstangen gedruckt (30x15) und dann die Kleiderstange von Gedotec entdeckt. https://amzn.eu/d/1vAkk4a Diese passt farblich besser, ist aus Alu und oben…
Initially I experimented with 5x7 dot matrix fonts for creating text on 3D prints like cards. Then it developed such far that I am now able to generate picture representations in this dot art. The picture shines through the card if you…
thank you to the amazing person who made the original pistol model I just made some red dots clip onto it. it may be a little hard to clip in but once you clip it in it won't be coming out. and go checkout my other models.
All files in print orientation Multicolor Inserts: Only for the inserts I included Transparent filament until 0.5mm Filament change at 0.5mm to the reticle color For the other parts, go to: No hardware:…
I used Bento3d.design to create a box, then modified it in Fusion360 to have recessed pockets for 16 bottles commonly used for DiamondDotz or Diamond Art. The bottles are spaced far enough apart so you can easily retrieve the specific…
I printed a large part in TPU and there were 49 dots leftover on my build plate from the nozzle oozing while going through the probing procedure, and they were difficult to remove, so I decided to make them a little easier to remove.…
This is a dice but with dots instead of numbers I created this one and one with numbers because some people prefer this.
This is a flush multiconnect mounting point, for multiboard small thread, installable with the multitool ( https://thangs.com/designer/Multiboard/3d-model/Multitool-974180 ).
Simple, stable pedestal stand designed for the Amazon Echo Dot Max . These stands elevate the Echo Dot Max to improve sound projection and visibility while keeping your desk or shelf setup clean and organized. Four height options are…
Could not find a 10-sided dice with dots instead of numbers - so here is my version it's about 50x50mm. Best printed on one side. If you dual colour print, I used edge fill in slicer as fastest method to colour. Step uploaded for…
If you downloaded the model, it means you are interested in it. Don't forget to like it, please!
This DragonClaw Hook model from Dota 2 is perfect for cosplayers. It is printed at a scale of 750%, but you can change it to suit your needs. It takes about 800 grams of plastic for the entire model, and it takes about 18 hours in time.
3D model of Megatron’s decapitated head from DOTM. The file includes two models: a standard version and another one feat
3D model of the DOTM axe for Optimus Prime Leader Class. The printing instructions are included in the 3D file. The 3D
The tank cannot transform into a weapon like the original Mechtech toy, it's only for vehicle mode."
Upgrade for Roadbuster's vehicle mode from Transformers DOTM. The front headlights of the vehicle don’t necessarily need to be removed to place the 3D print on top. However, you can still unclip them (no need to break the part — just…
The little house and the barbarian are two characters I created. The little house is from my book (read it for free at https://www.barbara.blog.br/blog/download/category/10/livros-flipbook/ ) and the barbarian is the mascot of my company…
Pretty simple...a 10mm TPU dot for all bumper/grippy feet needs. I used foaming TPU(ultimately 66A) and they turned out great. Ended up printing a 100 or so.
XRAY XB2 2026 Shock Tower Cover Modeled on the 6-dot tower. If using pliant material, this will work on the 4-dot as well (just bend it a little) If using rigid material like PPA-CF, this will only fit the 6-dot. The attached 3mf file…
A printable, magnetically mounting version of "squiggles n' dots" rank badge. Print in orientation provided, insert 6mm magnets in the holes (press fit), paint and enjoy.
As I dont like the original Carpio 2.0 feet, I made this base to use eight dot skates up to 8mm to make it more suitable for e.g. glass mousepads like I use. As printed pins might break off too easily when removing the rubber, Ive added a…
Ehdrien's Mini Faux Red Dot Sight as rear sight for Sig P250 Blowback. Check out Ehdrien for Red Dot internal Parts. https://www.thingiverse.com/thing:4832756/files And check out the genius behind the Sig P250 Blowback model.
Remix of the linked model with stronger holding arms.
SINGLE DOT FIBEROPTIC SIGHT FOR AIRSOFT GLOCKS (G19) Unique design eliminates the need for a front sight, and multiple dots. When the sight is on target the dot glows in ambient light, when off target the dot is obscured by the walls of…
Steinchentrichter (passend für Artdot- und China Runddosen)
Cestovní vodotěsná krabička na podpalovače. Do krabičky se vejdou 3 kusy podpalovačů o formátu 2x2x2 cm a cca 35 sirek. Doba hoření jednoho podpalovače je cca 8 minut. Vnitřní vložka pro podpalovače je ze dvou části, aby bylo umožněno…
I didn't like all high profile red dot mounts for the Umarex TP 50 Gen 2 with the picatinny rail, so I designed my own one. Mount comes with two screw sizes. One of M4 screw, the other one for M3 screw. Center to center distance between…
A compact and sturdy holder designed for DIY electronics and robotics projects.
made some changes to the original model to better suit my canadian outlets, figured i would remix it for others.
Used tinker cad to clean up what appeared to be overhangs on rear of model
Description: Modern decorative storage box featuring a stylish dotted surface texture and clean minimalist design. Perfect for organizing office supplies, cosmetics, small tools, or everyday household items. Features: Elegant dotted…
I am a big fan of Dota 2 and I would like to model and paint all the figures from Dota 2 starting with necrophos, I hope you like the model, the base is made through AI and I made a few adjustments in Blender
A bubble dot 3D printed lampshade with a soft, rounded texture that diffuses light into a warm ambient glow, printed in support-free vase mode for a seamless finish. The shade sits on a compact faceted base with flat geometric faces.…
Hey there! Check out my website to see the latest products I've designed—now available for you! Don't miss out, hit the link and explore what's new! My Shop: https://buymeacoffee.com/cc3dprojects/extras My Website:…
If you are looking for a lens cap that fits your E-Mount lens without the hassle of aligning the dot when screwing it on, you might want to check out this model. It is a universal lens cap that screws on and off easily, and protects your…
Dobry den, Vítejte na mém profilu, plném modelů a miniatur :-) Já jsem Ainon3Dprint tvůrce modelů a tiskař Mám tu pro Vas pero, tuzku pro konzoly typu nintendo (Nintendo DS, Nintendo DSi, Nintendo 2DS, atd). Tuzka je vyzkousena a funguje…
Alexa Stand Echo dot 3 Voronoi - Base para Alexa echo dot 3 al estilo vonoroi
Print with .20mm layer hight and Organic supports if you use prusa slicer you will need a LED and one of these flat batteries to build this idk pic whatever LED color you like. Maybe not white tho. The guy who originally made this for…
la hauteur est de 100 mm l'entraxe des vis est de 45 mm le diamètre des vis est de 3.5 mm n'oubliez pas de poster vos photos de vos prints ça fait toujours plaisir !
This project arose from a personal need and is the first one I modeled. It was also one of the first I printed, as I am new to the world of 3D printing. The goal is to hang an Alexa Echo Dot on nails or screws on the wall, making it easy…
Clock with dot matrix,esp8266 , am2320 , mq135,ldr,ds1302 Screen light level can be adjusted with ldr. Note: LDR and AM2320 slots may need to be filed I used voltage regulator with lm317.
Introducing Pixel Fidget Dots! Tired of the same old fidget designs? So is everyone and their mom! That’s why I’ve put my unique spin on the classic Pixel Fidgets to bring you something truly special. Meet the Pixel Fidget Dots – a fun,…
Shims for my VectorOptics Frenzy 1x20x28 Reflex sight, which uses the TEK footprint pattern. Mounted my sight on my Chiappa Rhino and found that the height over bore meant I had almost completely used up my vertical adjustment. Comes in 1…
This is a lighthouse lantern that you can mount 6 2mm LED dots - suitable for projects with the Pimoroni TinyFX board . Lighting the LEDs in sequence produces a nice sweep effect. Depending on the tollerances of your printer the LED dots…
A sunshade for generic red dots. Use some double sided tape if it has too much movement.
I added carefully placed negative volume cylinders in order to have the necessary screw holes that would otherwise have to be drilled into the model. The position of the holes is probably not perfect but it worked for me. Feel free to…
Ein Gehäuse für meine Wohnzimmerlampe. sobald der Diffusor gedruckt wurde wird dieser auch eingefügt Print Settings Printer Brand: Anycubic Printer: All-metal Mega Rafts: No Supports: Yes Resolution: 0.15 Infill: 20 Filament: Anycubic PLA…
This is a simple holder for your Amazon Echo Dot 3. It attaches to the Multiboard using 2 x 9mm T-Bolts. I prefer the bolts over the snap because the weight of the Echo Dot might pull the snap off the Multiboard. Tuck the wires behind the…
Check out this simple and efficient method to wall-mount your Amazon Alexa device! Perfect for DIY enthusiasts, using 3D printing with the Ender 3 V3 KE. Budget-friendly and creative innovation at its best! 👉 Follow me on Instagram for…
Tiny Dotted Succulent Planter Size : ~ D85x70 Happy printing! Please check also my other designs. If you would like to support new product development or obtain commercial license for my designs, you can do it here:…
passende Einpressmuttern: https://www.amazon.de/gp/product/B07ZZHL4RY/ref=ppx\_yo\_dt\_b\_asin\_title\_o02\_s00?ie=UTF8&psc=1 Category: Other
Samples printed at .24mm layer height, 3 perimeters, 4 top and 3 bottom layers with 25% lightning infill. Examples printed in: PolyMaker Polylite Brown (base color), Printed Solid Brad's Orange Glitter, Polylite White, & PolyMaker Dual…
Wanted to make a little stand for my 3rd Generation Echo Dot and didn't like any of the models I could find online, so I made my own! It can be printed both right side up and upside down (caddy for the echo dot facing the print bed), I…
0.3MM Layer, 15% Infill (Or Higher) - No Support/Brim Required. Multicolor print friendly.
I purchased a Revopoint 3d Scanner awhile back and it came with a lot of marker dot stickers. I wanted to at least make these reusable since I do a lot of scanning on metal parts and sometimes non-metal parts. The sheets of stickers do…
Prints great in PETG or PLA. If you're going to print it in TPU, 100% width is too loose on the sides. For a little bit of squeeze on the sides, reduce the with to 99% of original. The photo is of the TPU print.
Holder for doTERRA kids collection bottles Print settings: Printer: Prusa Mini Nozzle: 0,4mm Material: PLA Layer Height: 0,2mm Bed Temperature: 60°C Nozzle Temperature: 215°C Infill: 15% Supports: no
Very tight fit for an Echo Dot 3 holder , for IKEA SKADIS I've made a second, better fitting version. to be found as a second download. Enge Passung für einen Echo Dot Halter, für IKEA SKADIS Board. Ich habe eine zweite besser passende…
I found it very annoying to drag around a screwdriver to zero in my optic when at a field, and when used, would often slip off of the screw making me constantly have to look at the screw when adjusting making it more difficult to properly…
I made an Alexa Echo Dot 3rd generation wall mount. No Supports needed
Nouvelle version de l' INBOX PARADOXE ! Transformez facilement votre Alexa Echo Dot en l'intégrant à votre décor intérieur avec cette nouvelle InBox Paradoxe Mark II, s'inspirant des transistors radios vintage. Vous pourrez personnaliser…
Cable box for the Echo Dot 5 power adapter Supportfree power adapter with this dimensions: 70 x 41 x 38mm (approximate)
Cable box for the Echo Dot 3 power adapter Supportfree power adapter with this dimensions: 51 x 51 x 35mm (approximate
I tweaked the original design: Faux shell ejection port, dotted ironsights, overall design, minimal slide play
Picatinny adapter for Holosun HS407c, also works with the HS507c, Trijicon RMR, and ADE Stingray red dot sights. Requires 1x 3/16" diameter pin to press fit the mount on the picatinny rail Print Settings Printer Brand: Prusa Printer: I3…
Just a simple case with a snap-in lid for the BlueDot BME280+TSL2591 . I also added the blend-file if you want to modify it for your use case.
Split it as sometimes its hard to print long objects with abs and asa
This is a slider sign with two simple circles that can be assigned any color you like in a multi-color print. The sliding cover prints separately from the body and easily snaps into place.
This can help students transition from using objects to help them with addition (or subtraction). I had a wonderful teacher who switched me to this method when I was struggling with math. She had large version on the wall, and I thought…
![Zinc 2.0 dotted sight slide [minimized slide wobble]](https://media.printables.com/media/prints/1047086/images/7945689_8bcab319-80f4-4acc-9a2f-a28a3a91b632_4d0defd6-c0da-48f2-967d-3204dcf95f6c/screenshot-2024-10-23-042140.jpg)
