Search results: dr3

Sort order

Counting matching models…

P
Printableskhyams

RAM Storage Tray for Laptop RAM 16 Slots (DDR3 & DDR4)

After printing yourunwelcome's nice design for full-sized DIMMS, I modified the design to accommodate SODIMM, laptop RAM. DDR3 and DDR4 are different widths so I made it half and half. If you print two to use one as a lid, make sure you…

Downloads
824
Likes
93
Rating
4.89
P
Printablespixelk

DIMM Memory Organizer SDRAM DDR2/DDR3/DDR4/DDR5 (stackable) - Heatsink enabled

Based on djkrice organizer for SO-DIMMs. Fits 10 DIMMs, can fit more if you edit the .scad (it also has the measurement for SO-DIMMs). Can be stacked. The honeycomb pattern on the bottom is to save filament without being detrimental to…

Downloads
627
Likes
47
Rating
4
P
PrintablesPitshaft

RAM Memory Holder (DDR5, DDR4, DDR3)

Storage box for 8 desktop RAM modules (DDR5, DDR4, DDR3) with lid. The lid can be easily lifted or placed on top – there is no locking mechanism. The model comes without any labeling. Labels can be added as needed using Bambu Studio. If…

Downloads
605
Likes
34
Rating
5
P
PrintablesEmrys Boschy

Suzuki DR350 - Gauge Cluster Container Replacement

The Suzuki DR350 dash fixer upperer! I've gotten mine printed in PLA at the moment for prototyping, but the ideal I this case would be a white PETG I think. You will also need 3x M5x30 cap head hex bolt and an accompanying nut. Print out…

Downloads
223
Likes
10
Rating
0
P
PrintablesUnleashTheBeast

DDR2 DDR3 DDR3L SO-DIMM Rack for 40 Sticks

I needed a Rack for a big amount of DDR3/DDR3L SO-DIMMs, so they dont just fly around in antistatic bags and on countertops etc. Also works for DDR2, although I dont know why you dont just throw those away. DDR4 is a bit wider and doesnt…

Downloads
166
Likes
16
Rating
5
P
PrintablesEmrys Boschy

Suzuki DR350 Frame Guards

Print in either nylon or ASA. Both will suck, but they'll do the trick. And you need to angle the left side guard to get it to fit the build plate, but she'll go! I've included DXF files for laser cutting!

Downloads
156
Likes
9
Rating
4
P
PrintablesBaofengMan

Fake DDR3 Gaming Ram Heatsink Case

Print upside down with no supports, any layer height should do.

Downloads
154
Likes
12
Rating
0
P
PrintablesTolga Ozisik

Gridfinity DDR3 ram holder Stackable

Gridfinity based 3 slot DDR3 Ram holder. It is stackable but I am not sure it is universal or not. Please comment if you have any problems and recommendations. I will update!

Downloads
125
Likes
13
Rating
5
P
PrintablesRubenSeiffert

Suzuki DR650 DR600 DR350 brake line attachment (Befestigung Bremsleitung)

This attachment should be printed with at least 3 wall lines and made of UV-resistant material. PLA is not suitable. I printed it myself from PETG-CF and it has withstood the strain on my DR650 RSE for 1.5 years without any problems. Very…

Downloads
118
Likes
14
Rating
5
P
PrintablesVidariondr

DDR3/DDR4 laptop SODIMM RAM tray

Tray for laptop RAM I've made for work. It's designed for DDR4, but DDR3 fits as well (it's a bit of a looser fit). It's designed to be easy to read the label without taking each stick, and easy to take out when needed.

Downloads
113
Likes
10
Rating
5
P
PrintablesEmrys Boschy

DR350 Case Savers

I printed these from PETG at 100% infill. We'll see how they hold up. They need a lot of supports to print properly unfortunately.

Downloads
68
Likes
4
Rating
0
P
PrintablesClarkWorks

Dayton blower(1tdr3) Flange Square to round attachment

A square to round attachment for dayton blower version 1tdr3, my local hardware store doesnt sell any of this attachment, so I decided to do it myself. Ps: the model uploaded curve sides, I'm just using this model for referrence but it's…

Downloads
66
Likes
4
Rating
0
P
PrintablesHaryn

DR350 Bumpstop

Bump stop replacement for DR350 rear shock with 14mm shaft. Printed in TPU .28 with 30% infill.

Downloads
61
Likes
2
Rating
0
P
PrintablesBalder Andersen

DDR5, DDR4, DDR3 RAM holder/tray in various sizes

This RAM holder/tray is meant for storing DDR5, DDR4 and DDR3 Ram The RAM needs to be max 8,334 mm thick, which means that the tray is compatible with most RAM sticks The RAM holder is available with space for 4, 8 or 16 sticks of RAM…

Downloads
59
Likes
5
Rating
0
P
PrintablesEmrys Boschy

Suzuki DR350 - Fork Bracket

Make with 100% infill and ideally use metric hardware for mounting! Replaces SUZUKI P/N: 51203-13E00

Downloads
57
Likes
11
Rating
0
P
Printablesgrappeq

SODIMM DDR3 model

A very basic model of SODIMM DDR3. Hopefully someone might find it useful. The model is 1mm thick - which is roughly the thickness of the RAM PCB. Keep in mind the actual RAM has chips on it, making it 2-4 mm.

Downloads
53
Likes
0
Rating
0
P
PrintablesMartinMB

Model of Suzuki DR350

I like motocycles too so i modeled it!

Downloads
47
Likes
6
Rating
5
P
PrintablesmozWORLD

Netgear N600 WNDR3400 etc. Wall Mount

Uses 2x #6 screws. Print in anything rigid besides PLA, it will be too brittle and snap in a few months, if you need to bend it again I needed a mount to hold this old N600 wireless router I am now using as a switch. I plan to configure…

Downloads
37
Likes
3
Rating
2
P
PrintablesPrucha Prints

DDR3 Ram Stick

Almost 1:1 replica of a DDR3 Ram stick for PCs made in Fusion 360 with free student licence. Made it cause I felt bored. Enjoy :)

Downloads
34
Likes
3
Rating
0
P
PrintablesUseFullMake

DDR3 ram slot cover

Please print with abs/abs+/abs pro wall should be 2.4mm---top/bottom 1.2mm---LH=0.32mm make sure the thickness is around 1.2mm (Z-height) after printing the model use on your own responsibility

Downloads
30
Likes
3
Rating
0
P
PrintablesGRDN

GRDN's RAM Picture Frame - DDR3 RAM Bracket

Project is WIP Parts of the series: CPUs (available for AMD) Motherboards (WIP) RAM (this, available for DDR3 so far) Memory (WIP) Background Over the last couple years, I came across a number of companies offering (disassembled) tech…

Downloads
29
Likes
11
Rating
0
P
PrintablesMaddComputer

DDR3 SODIMM holder

Once again, the title says it all. Hold your useless collection of old DDR3 laptop style memory.

Downloads
26
Likes
1
Rating
0
P
Printablesbradnotbot

Netgear WNDR3700 v2 router stand

The original stand for this router was only connected by a thin piece of plastic which was essentially non-removable once installed. I made this cradle type stand. It has 3 strips that get glued in which I printed from TPU for some grip.…

Downloads
25
Likes
0
Rating
0
P
PrintablesBlake_Volpex

DDR3 Spacer

Best not to print in PLA as the inside of some servers can can pretty hot, PETG would be fine. This was done in ABS because the printer was already loaded with it.

Downloads
18
Likes
1
Rating
0
P
PrintablesBagUd

DDR3 SO-DIMM 4X CASE (Also fits DDR2)

A compact and practical case designed for safe storage and organization of DDR3 SO-DIMM modules (laptop RAM). This model securely holds up to 4 SO-DIMM sticks and keeps them separated to prevent damage, dust buildup, and accidental…

Downloads
17
Likes
4
Rating
0
P
Printablesdanielkrah

TP-Link WDR3600_4300_4900_C5_C7 mount

TP-Link WDR3600_4300_4900_C5_C7 mount for use with spax.

Downloads
17
Likes
5
Rating
0

Silica updated cap for mordr3d silica tray

I remixed the cap for this design by Mordr3d. The cap in this design only had holes to bolt it down to the lid of the dry box. I added holes where you can fit M3 nuts in making it a little more secure. Print with the M3 nut holes facing…

Downloads
15
Likes
3
Rating
0
P
Printablesjturner490

Cover for Hach DR3900 Analyzer with holes for tubing

I designed this cover for the Hach 3900 series water analyzer, commonly used in water treatment labs. This cover allows plenty of headroom for testing hardware to be inserted into the analyzer well and includes two holes in the side that…

Downloads
10
Likes
2
Rating
0
P
Printables

DDR3 SODIMM holder

Once again, the title says it all. Hold your useless collection of old DDR3 laptop style memory.

P
Printables

DDR3 SO-DIMM 4X CASE (Also fits DDR2)

A compact and practical case designed for safe storage and organization of DDR3 SO-DIMM modules (laptop RAM). This model securely holds up to 4 SO-DIMM sticks and keeps them separated to prevent damage, dust buildup, and accidental…

P
Printables

Suzuki DR350 - Fork Bracket

Make with 100% infill and ideally use metric hardware for mounting! Replaces SUZUKI P/N: 51203-13E00

P
Printables

Suzuki DR350 - Gauge Cluster Container Replacement

The Suzuki DR350 dash fixer upperer! I've gotten mine printed in PLA at the moment for prototyping, but the ideal I this case would be a white PETG I think. You will also need 3x M5x30 cap head hex bolt and an accompanying nut. Print out…