Counting matching models…
A simple cover for a Lutron wall-mounted drapery bracket. The cover enhances the aesthetics of your drapery hardware by concealing the unsightly wall mounting screws on the brackets. Cover mounts vertically against wall overtop of…
Print approx. €0.43–€0.53 excl. taxPreliminary estimate for PETGSource material: PET
Use these covers to hide the ugly support brackets which are used on several models of Forest Drapery tracks. The bottom portion of the cover fits under the bracket against a wall which is screwed in place during installation. The top…
Print approx. €0.22–€0.27 excl. taxPreliminary estimate for PETGSource material: PET
Consists of a 5x3x3 gridfinity bin without lip and an inlay for 12 precision screwdrivers (brand draper) did not wanna make a specific gridfinity bin for these screwdrivers, since i might replace these over time. So i used an inlay, a…
This is tray to hold my Draper Pliers set in my draw using Gridfinity. I bought these from Amazon a while ago, it might work for other models. This was created in onshape from a set of templates I found. This video was very helpful in…
My friend broke the original handwheel for his SIP wood lathe and was distressed to discover from SIP that the part was unavailable. 3d printer to the rescue... I took measurements from the original wheel and made modifications to the…
A quick and simple holder to attach the six piece Draper needle file set to the Honeycomb Storage Wall. Attaches using the “insert-with-M3” part included in the Honeycomb Storage Wall. Ready to print without the need for supports. I…
Holds a Draper 6 Piece Diamond Needle File Set - will likely hold most needle file sets in a 4x2 Gridfinity holder. Measure approx 30mm tall when filled, good for shallow drawers. Replaces a much larger and flimsier tool case.
If you like this model, don’t forget to check out my other creations in my collection — you might find something else you’ll love 😉 Thank you so much for every download, like, and support. I truly appreciate it! 🖨 Technical Information…
Holder for Draper - Socket Adaptor set . After purchasing and realising these would be loose in my work bag, I had to come up with a solution. I chose to execute using cadquery and the cq-editor . To make your own configuration see the…
A remix of the original to put directly inside the HSW connector New version with cut to just slip in
To facilitate inserting heat inserts straight (or at a given angle), this adapts a Dremel Drill Press to carry a Draper soldering iron. Should be quite tolerant of print settings, but I suggest using PETG, 0.20mm Quality, 3 perimeters,…
should print fine with any layer thickness (i've used 0.4 & 0.32mm). width 50mm length 130mm height 30mm 29March'22: model slightly updated from 50.5 to 50mm width as some of my bins seem narrower than others. Also added a new model with…
A gridfinity bin for storing the Draper Redline plier set It takes the standard magnets however the fit is very tight (so no glue required). I used this magnet jig and a rubber mallet to tap (and I do mean tap :D) the magnets in.
I remixed the original model as the inner width (50.3mm) was too wide for my Draper Engineer Square (25.6mm).
Draper Mini Hook and Pick Set Bracket for wall mounting
Just slight changes from the model I remixed with, to fit the Draper-branded screwdriver handler I use (very similar to a different white label I saw Bigclive use.) Also remvoed the magnet holes because those just end up being messy with…
Fixes to multiboard using snaps built in to the model, no need for additonal parts, just click it in to the multiboard.
The original cap on the kit disintegrated and would leak. Designed and printed a replacement and used the original cap sealing disc from old cap. I printed this cap with PLA but PETG would be better. Sliced with Prusa Slicer and printed…
Just a plate of slightly tapered dividers. Simple, but useful. There's a version for each of the three drawer sizes.
A divider for drawers on the Draper Expert 89470 30-Drawer Storage Cabinet ( from Amazon UK ) or other cabinets that use the same drawer size. Note that the fit is intentionally quite tight. If you prefer something looser, you may want to…
My father In-Law showed me a set of old curtains at their house, and mentioned that the style is very old, and that the custom plastic pins needed to hand curtains on them have been discontinued, and are very difficult to get. Using one…
This is a holder to attach to an IKEA Skadis peg board designed to hold the Draper 10209 Universal Battery Tester.
Drapery Pulls I designed these parts so you could feel if you have the correct drapery cord end. These are especially useful for double layers of draperies as when a set of shear draperies is hung with another set. They are also useful…
Holder to prevent a drapery of a dishwasher to spring out.
A drapery track end cap for a Finesse Smart-Touch Motorized Drapery System by Textile Trimmings.
My Draper Tap & Die set didnt come with any storage box So again I made one! Category: Tool Holders & Boxes
Although the original packaging is reusable, the chisel was held in place with a cable tie. This clip fits in the holes for the cable tie and allows you to hang the chisel upright. Printed at 0.2mm, 15% infill, PLA.
Each block measures 33 x 50 x 6.5 mm. Place them under each mounting bracket & stack them up if you require more distance from the wall. Secure them with the same screws you use to mount your brackets.
Although the original packaging is reusable, the chisel was held in place with a cable tie. This clip fits in the holes for the cable tie and allows you to hang the chisel upright. Printed at 0.2mm, 15% infill, PLA.
A simple cover for a Lutron wall-mounted drapery bracket. The cover enhances the aesthetics of your drapery hardware by concealing the unsightly wall mounting screws on the brackets. Cover mounts vertically against wall overtop of…
Print approx. €0.43–€0.53 excl. taxPreliminary estimate for PETGSource material: PET
If you like this model, don’t forget to check out my other creations in my collection — you might find something else you’ll love 😉 Thank you so much for every download, like, and support. I truly appreciate it! 🖨 Technical Information…
A divider for drawers on the Draper Expert 89470 30-Drawer Storage Cabinet ( from Amazon UK ) or other cabinets that use the same drawer size. Note that the fit is intentionally quite tight. If you prefer something looser, you may want to…
