Counting matching models…
Insert holds: M12BLIDRC M12 battery (in my case M12HB2.5) M12TC2 USB charger Small compartment in the back for bit holder or other small parts Remaining space of the organizer is used to store a SHOCKWAVE Set 38pcs (4932492009) or other…
The MicroTrackRC is a small 3d printed tracked vehicle. It is designed to be easy to print and assemble and use very cheap readily available electronics but still be a very fun project to build and drive. I printed all the parts on two…
Made a quick logo for the End Gate of the Skid Steer Loader made by AN3DRC. https://an3drc.com/e-shop/construction-vehicles/tracked-skid-steer-loader https://an3drc.com/e-shop/construction-vehicles/wheeled-skid-steer-loader recommend…
I reshaped it a little. Also this is pretty high tolerance overall so i recommend printing the bigger one.
This includes the various parts I designed for my custom build/make of Chad's car stand tower. May or may not be useful to you, but hey, here they are! Standard Inserts : 42mm electric screwdriver support: https://amzn.to/3xaRdVm 2x22.5mm…
LDRC Shock Preload Spacers - Fits WLToys Shocks I made these for my LDRC 1899 RC and fit like a glove. 5mm Diameter. Will also fit WLtoys K989 and K969 RC's. Print 100% infill, no supports required. Enjoy!
MIDI_Box_v1 If you have questions: write me an email: [email protected] and give me some days to answer. I dont do daily emails. Thanks. German prefered but english is also fine. All files / and THE SKETCH are on GITHUB:…
THIS IS A REMIX:https://www.thingiverse.com/thing:2543369 Remixed this for a cool bodykit. I applied heat with a lighter from a moderate distance then just pushed the pipe with ma hand. The grilles were fixed in with blue tack(patafix)…
I broke my ACXWA steering arm on my miot and i got a 3d printer so i remixed it with a wider head and bigger holes. If the steering binds at full lock use a zip tie (check image) and that should work very well. Also you its a high…
Printed with PETG at 0.2mm layer height, no supports
Works with most 540 sized Brushless Motors used in 1/10th scale racing. Print standing up with the largest side touching the print bed. No supports needed. You may need to tweak the size or sand a bit if your printer doesn't produce it…
THIS IS A REMIX:https://www.thingiverse.com/thing:2543369 Remixed this for my miot. Maybe good for other ldrc cars idk.
This is pretty high tolerance overall so i recommend printing the bigger one.
Footpeg Adapter, because the original springs are smaller in height. Fits with DRC Footpegs for Yamaha YZ/WR ... on my Tenere 700 with original spring and bolt. Printed with Polypropylen Carbonfiber.
A Remix of the great Gopro mount for the Push Unite Paintball Mask by Maraudrco. I changed the holespacing to fit the Virtue Vio Mask
This is my take on the challange to design the best wheels for Maker's Muse wobbly wheel robot. (They don't actually have to be wobbly.) I went for a more traditional wheel design but with only the ridges being solid. This is to keep it…
Brand DrChop corner LED Lamp. Wall mount for hanging the lamp on the wall instead of on the stand
THIS IS A REMIX FROM: https://www.thingiverse.com/thing:5392125
This is the Microdrift 1/28 scale RC drift car by 3Drcnc Projects. This projects is perfect for some indoor RC fun! It is a small quick project that can be printed in a couple of hours. The design uses cheap electronics that are readily…
I've been searching for a good, compact personal marker light to be seen by traffic or hunters when hiking in the dark and the BRDRC drone strobe off Aliexpress has proven itself to be very suitable for that task. This case allows for its…
This is a low poly model of the Boston Dynamics Atlas robot as used in the DARPA Robotics Challenge Trials in December 2013 in Homestead, Miami. It is based off the model available as open source via the drcsim project (…
This is a deeper battery door for the LDRC 1/18 drift car. The battery that came with the car was faulty, so decided to use a small 2s lipo, I had and make a few alterations so the battery would fit. The battery door is very basic, but it…
Frontend kit for the BPX Bullpup conversion kit for the Tippmann TIPX
I don't usually print stuff without a purpose. I print useful parts for printers, other hobbies or my house. So when I designed my maker coin I didn't want it to be a piece of plastic with no use. This is my maker coin and it has a lot of…
Wheels to go on the LDRC Watanabe Rims!
Print it on a Prusa MK3s+ using standard 0.2mm quality settings and prusament PLA white. The bottom of the part will later face outwards to have a nice finish facing the room.
I chop chop the box off(check image), melted the hinges of the battery's door and used superglue with baking soda to reinforce the chassis which also adds weight more to the rear. Also wrapped it up with some electrical tape so it looks a…
Adapter to fit snow tracks of the WPL C14 C24 C24-1 B14 B24 to the LDRC Unimogs (P06 and LD-1201). A little longer center screw is needed. I recomend to open the tracks mechanic inside (2 srews) and grease it to lower resistance. As the…
Instructions: You must cut off the battery box for this conversion to work! Look at pics for more info. | some support* |
Ducktail spoiler for LDRC RX-7!
I wanted a metal bucket and I cant weld thin aluminum sheet. Modified the original bucket file to accept a 1mm aluminum sheet while retaining the overall appearance of the original bucket. Will Need: 12 - 3mm x 6mm cap head screws 12 -…
It looks a lil messy but it works just fine (╯°□°)╯︵ ┻━┻
A cover designed for exterior purposes to protect it. Printed with asa black
Decided to make a body instead of buying an ir60 and cutting it up it works great for me feel free to remix and make it look better I’m no modeling expert lol
Will Need 2 - 80mm M4 spacers 2 - M4 x 10mm socket head 2 - M4 x 16mm socket head
Round tires BBS Rims
This is a fixed angle (30) camera mount for the Foxeer Box. It is heavily inspired be the Brain3D-GoPro mounts. I have Brain3d's blessing to post this design on thingiverse. Currently, i have two versions available. One is for the new…
LDRC 1297 front electronics shelf
You need to resize the file to fit the rc...
Keep your 4DRC Mosasaur Dinosaur RC fully protected with the AzureDragon Battery Cover Lock 🐉 This 3D-printed part is designed to securely lock the waterproof battery cover, ensuring no water leaks into the electronics while you enjoy…
Extend the axles for wider wheelbase. Holes to use screws to bind to axels on sides. Print horizontal for strength.
LDRC 1297 Top Battery Cover. Part was missing in kit, so I designed this.
LDRC 1297 Top Battery Cover - large.
🏎LDRC 1/18 Drift Chocks!🏎 Any Drift Car For 1/18 Scale
Projekt stroje na drcení platového odpadu Žáci sami přišli s tímto nápadem, vytvořili postup
spoiler that you can slide on the ldrc nsx
AERO LDRC Modded Wing ____________________ Changes: -*just looks cooler -Skull Logo -AERO Logo -Spoiler
Fillers for the holes that were meant to have the spoiler on! If you don't want a spoiler, this is meant for you!
An exhaust pipe for 1/18 RC drifters. May need to do a bit of tinkering. (photo is what it is based on)
I broke my ACXWA steering arm on my miot and i got a 3d printer so i remixed it with a wider head and bigger holes. If the steering binds at full lock use a zip tie (check image) and that should work very well. Also you its a high…
I wanted a metal bucket and I cant weld thin aluminum sheet. Modified the original bucket file to accept a 1mm aluminum sheet while retaining the overall appearance of the original bucket. Will Need: 12 - 3mm x 6mm cap head screws 12 -…
Will Need 2 - 80mm M4 spacers 2 - M4 x 10mm socket head 2 - M4 x 16mm socket head
Replacement tyres for the LDRC LD1804 1:18 drift car. I printed these out of TPU and as such the design is tight on purpose, as I didn't want them to slide off the rims. The car feels much more energetic on rubbery tyres than on plastic…
