Counting matching models…
A unique 3D printable creation — this Button Hook Dressing Aid, Ergonomic Handle, Wire Hook For Buttons, Daily Living Aid Tested on 8+ FDM printers. Download and print immediately. **What's Included:** - STL File - 3MF File - OBJ File -…
Basic drawer/wardrobe/dressing door handle with triangle model. Based on my previous wheel knob :) For fixing you can use M4 screws.
EN: A simple hook to dressing-room. Hook Dimension: H75 x W20 x D35mm CZ: Jednoduchý háček do šatny. Rozměr háčku: V75 x Š20 x H35mm
Now Free - Yay! Fret End Dressing and Bevelling File Holders Holders for a short file, at a variety of angles. For dressing and bevelling the ends of guitar frets or 100s of other uses, I’m sure. There is a file set at 90° for filing…
The frame and the handle are printed seperatly and should snap fit together. No support needed.
Reinforcement for the paper dressing doll to "not lose one's head".
This is a remix of the original project Particulates Sensor Case https://www.thingiverse.com/thing:2775946 . a very nice frame for luftdaten.info / sensor.community particulates sensor, based on OBO Bettermann T60 junction box. In my…
A soft release button screws into the threads on a camera shutter release to provide a more controllable shot. Four buttons here fit different cameras that I have. Some ‘spikes’ are shorter and fatter. Too long and the button stands too…
Model of my jewelry box for chains and so on. It is 25 x 16 x 2 cm, it is stackable with my special parts (https://www.prusaprinters.org/cs/prints/135871-zarazky-ke-krabickam-na-sperky). CZ: První model z mé série krabiček do toaletního…
Inspired by Tubalcain's video, but lacking a milling machine or nice chunk of steel, I cam up with this. It works on my Record Power 8inch grinder (RS8GB) but probably on any 6" or 8" bench grinder with a relatively shallow (3-8cm) tool…
Adapter to reduce the opening for a hair dryer in a hairdressing salon. From 84mm to 65mm
This 3D-printable double hook is designed for swimmers and triathletes. It’s perfect for hanging wet towels, swimsuits, and goggles in locker rooms, shower stalls, or poolside changing areas. The compact dual-curve design keeps gear…
Another model of my jewelry box - now for rings, pendants and so on. It is 25 x 16 x 2 cm, it is stackable with my special parts (https://www.prusaprinters.org/cs/prints/135871-zarazky-ke-krabickam-na-sperky). CZ: Další model do mé série…
Drilling holes is not always the solution :) Most off the shelf curtain rod holders require holes, or are not suited for my use case. I found some, but looked very flimsy. The dressing was custom-made and uses curtains instead of doors,…
H=30 D=15 Please check in photo. The distance between the holder part and hole is 25mm. Have fun!
Black Cat Halloween Window Dressing. Just doing some experimenting.
This clips were made to dress wire from the three strings of our solar array down to the inverter. Wire for main pairs: ~6.75mm diameter, ground wire: ~4mm diameter. The idea was that the clips attach using 1/8" zip ties, and then are…
Print ya own hinged hairdresser scissors! I made this for a jewellery project, but my printer struggled with the smaller scale. Works perfectly when scaled up though, just keep an eye on the hinge details on your print preview. Mine looks…
Container for storing and providing easy access to alcohol wipes (approximately 50 x 50 mm) for skin disinfection, and venflon adhesive dressings (approximately 130 x 90 mm), designed for wall mounting. Printed at a standard speed with a…
Another model of my jewelry box - now for bracelets (especially circular bracelets) and so on. It is 25 x 16 x 2 cm, it is stackable with my special parts (https://www.prusaprinters.org/cs/prints/135871-zarazky-ke-krabickam-na-sperky).…
A model for dressing your drivers. Requires 2x 608 bearings and a m3 screw.
A unique 3D printable creation — this Button Hook Dressing Aid, Ergonomic Handle, Wire Hook For Buttons, Daily Living Aid Tested on 8+ FDM printers. Download and print immediately. **What's Included:** - STL File - 3MF File - OBJ File -…
Basic drawer/wardrobe/dressing door handle with triangle model. Based on my previous wheel knob :) For fixing you can use M4 screws.
Experience the elegance of classical art with this stunning 3D printable figurine that captures a moment of graceful beauty. This exquisite female figure statue showcases flowing fabric and delicate poses, making it perfect for desk…
CZ: Tento model můžete pověsit třeba na zeď, hodí se ideálně pro rodiny kadeřníků a kadeřnic. ;) Tisk je jednoduchý, bez podpor. V gcode souboru je změna barvy pro jinou barvu nůžek. V nůžkách je otvor pro šroub, aby výtisk držel na zdi.…
Hier findest du eine Box passend für die Dressingtütchen. Somit fliegen sie nicht mehr in der Schublade oder dem Schrank umher und sind immer ordentlich sortiert.
Basic drawer/wardrobe/dressing door handle with triangle model. Based on my previous wheel knob :) For fixing you can use M4 screws.
Dressing table organizer 13 mixed spaces space for cotton pad space for cotton sticks space for makeup brush and other
I made this to hold tire dressing when detailing my car. I needed something that I would easily be able to spray into and dip a brush into without kicking over. I made it with a large base and a funnel opening to catch the spray. I don't…
my print settings: Rafts - Brim: NO Supports: NO Nozzle: 0.6 Resolution: 0.3 - 0.4 Infill: 10% Material: PLA Brand: extrudr Color: white printed on Anycubic Chiron
I have provided these the 90° and 15° free so you can see how they work for you. There is a file set at 90° for filing flush to the fingerboard and one set at 15° for rounding over the edges (although that is steeper than usual). If you…
When your out camping (or POTA or SOTA) and you want to substantially increase the distance of your VHF radio - a J-Pole or Slim Jim is an easy way to do it. This antenna is made from a 54" length of 300 ohm twin lead wire. I'm not going…
A small holder to keep tiny little tupperware salad-dressing containers from going all over my cabinets.
Simple field dressing tool that I redesigned for easy printing.
Very similar to original one, I just modified the perimeter to improve gripping
EN: A simple hook to dressing-room. Hook Dimension: H75 x W20 x D35mm CZ: Jednoduchý háček do šatny. Rozměr háčku: V75 x Š20 x H35mm
The latest installment of my transfer adapter. This adapter fits Ken's dressing bottles and many others. In order to print with a flat lip seat I designed in a custom support. You can delete it in the silcer if you want. I print in PLA or…
Set the tilt angle of a tall dressing mirror. The rear bracket fits over the back of the frame, whereas a small bracket, holding the front, is screwed into the bottom rear of the tiltable mirror. build123d model file allows you to change…
