1,795 models
A new design inspired by the wind and sand of our planet (and other planets to). Used Filament: This model was printed using Urban Grey Matt PLA from FormFutura The FormFutura team was so nice to send us some samples and we had the…
Print approx. €6.26–€7.65 excl. taxPreliminary estimate for one variant
A set of battery boxes to store AA, AAA, C, D, PP3 (6F22) and 23A batteries. You can print one size at a time and I've included the .3mf and GCODE files for the Prusa i3 MK3/S using PETG which is a great material for these boxes. Also…
Print approx. €0.10–€0.12 excl. taxPreliminary estimate for PETGSource material: PET
Kit card model of the two-seater ornithopter from Dune (2021). Can be printed in a single piece kit card or as separate pieces in different colours, at a different scale or to replace a piece that broke. Tested to work at 75% scale for…
Print approx. €1.24–€1.51 excl. taxPreliminary estimate for one variant
A nice and simple wind and sand inspired wall decoration for your home. Print information: Recommended standard base printer settings Recommended using a lower layer hight (0.15/0.2mm) for better results in details Prints very good in any…
Print approx. €1.29–€1.58 excl. taxPreliminary estimate for one variant
NoWalls Standard Dungeon Tiles (OpenLock/MagBall) ================================================== Part of my #NoWalls Modular 28mm Dungeon Tiles Collection UPDATE 2:* Once again I have updated the files. These are now at Version 4. The…
Print approx. €0.23–€0.28 excl. taxPreliminary estimate for one variant
These Rings fit the standard Figure size like you get them from Heroforge. The case fits 6 Rings each. Printing Instructions Basic Rings Just add a Color Change at 1.2mm. PrusaSlicer ≥2.4.0 will automatically suggest this. Exhaustion Ring…
Print approx. €0.88–€1.07 excl. taxPreliminary estimate for one variant
For best effect this bookmark should be printed with a different color from the logo layer upwards.
Print approx. €0.42–€0.51 excl. taxPreliminary estimate for one variant
With thse Spell Slot Trackers you have the number of open spell slots for your caster always in sight. One d6 dice per spell slot level is used to keep track of the number of open slots. This version "Half Caster" has dice slots for spell…
Print approx. €0.98–€1.19 excl. taxPreliminary estimate for one variant
The luxurious Penguin Galaxy edition of Frank Herbert’s original Dune features a beautiful cover by the designer Alex Trochut. This bookmark is a miniaturised homage to the back cover logotype with the letters D-U-N-E stylised in a…
Print approx. €0.35–€0.43 excl. taxPreliminary estimate for one variant
Mark "Detect thin walls" under “Print Settings” to make sure the details are printed correctly
Print approx. €1.93–€2.36 excl. taxPreliminary estimate for one variant
I did not care about being compatible with other tiles. I just tried to make these as versatile as possible. Plan is to build the dungeon as adventurers enter a door/opening. Taking the tiles from already visited places and creating new…
Print approx. €1.38–€1.68 excl. taxPreliminary estimate for PETGSource material: PET
Player board for the Dune Imperium board game inspired by the Shai Hulud mural from the movie. Presented are two 3d models, the smaller one is perfectly sized for the Prusa mini which I own, and the bigger one with extra spaces for the…
Print approx. €4.52–€5.52 excl. taxPreliminary estimate for one variant
Verwendete Nozzle N0.4 Schichthöhe 0.2mm Material PLA Infill 20% Ich druckte dieses Modell mit Stützstruckturen für die Skistockkuhle. Bei der Montage schmolz ich die Säulen auf die Halterung und füllte die Kuhle mit Heißkleber um mehr…
Print approx. €1.60–€1.96 excl. taxPreliminary estimate for one variant
Just a small coin that has the D&D logo on one side. If you want a finer resolution, the one the size of a silver dollar prints really nicely with a bit of ironing at the end as well.
Print approx. €0.26–€0.31 excl. taxPreliminary estimate for one variant
I created this Thumper prop from images and clips I found online so it's not an exact replica but I believe it is pretty close. There is currently no functionality in this model but I am working on a motorized version that will hopefully…
Print approx. €0.21–€0.25 excl. taxPreliminary estimate for one variant
Bicycle valve caps are notoriously dull. Not this one. Guaranteed to bring a smile to faces when printed in bright color. For the sharpest pixel effect print using 0.25mm nozzle. However the standard 0.40mm nozzle is fine too. Should fit…
Print approx. €0.14–€0.17 excl. taxPreliminary estimate for one variant
My custom Dungeons and Dragons tiles that I designed to print with the least amount of material possible. Trigger warning: unpainted miniatures in the picture. There are optional magnet holes to connect the tiles together, or if you plan…
Print approx. €2.91–€3.56 excl. taxPreliminary estimate for one variant
This is a remix of a cute articulated worm from here: Worm Key Ring by Madistudios - Thingiverse substituting its head with a dune worm. Print in place. Layer height: 0.2mm. Infill density : 15-20%. Supports will be required but only at…
Print approx. €0.86–€1.05 excl. taxPreliminary estimate for one variant
Fits base game with first expansion. There is slot for 3D Printed figurines.
Print approx. €2.50–€3.05 excl. taxPreliminary estimate for one variant
This is a set of trays designed to be a one stop storage solution for Tiny Epic Dungeons. All the content from Potions & Perils, The Stories Expansion, the Minis, and the boss Meeple upgraded tokens will fit in these trays. Please post…
Print approx. €2.08–€2.54 excl. taxPreliminary estimate for one variant
The original board game doesn't have any insert suitable to hold all cards with sleeves put on. Unable to find anything on the Internet, I've decided to start this project and create my own, custom insert that will organize all cards and…
Print approx. €4.43–€5.41 excl. taxPreliminary estimate for one variant
Holder for a ketchup bottle that fits bottles made by Idun (Norwegian company). Store the bottle up-side-down to make it easier to empty. Can of course also be used with similar bottles. I've printer this with PLA. Features: Stores the…
Print approx. €1.41–€1.73 excl. taxPreliminary estimate for one variant
I created and released a few sets of #NoWalls Dungeon Tiles that use the OpenLock form factor. During development I wanted to try out the 5mm magnetic balls for easy connections without the OpenLock clips. I came up with a small…
Print approx. €0.30–€0.37 excl. taxPreliminary estimate for one variant
My take on the D&D logo to put on boxes and stuff
Print approx. €1.79–€2.19 excl. taxPreliminary estimate for one variant
must add supports to model
Print approx. €1.94–€2.37 excl. taxPreliminary estimate for one variant
I did not care about being compatible with other tiles. I just tried to make these as versatile as possible. Plan is to build the dungeon as adventurers enter a door/opening. Taking the tiles from already visited places and creating new…
Print approx. €1.17–€1.44 excl. taxPreliminary estimate for PETGSource material: PET
needs supports
Print approx. €0.91–€1.12 excl. taxPreliminary estimate for one variant
for english please scroll down → für deutsch … hier lesen: Die Spieleschmiede brachte 2023 das Spiel Dungeon Drop inklusive Erweiterung Dropped Too Deep und andere mit dem Verlag Mirakulus heraus. Für diese Spielschachteln sind das die…
Print approx. €1.60–€1.95 excl. taxPreliminary estimate for one variant
Einfache Winkel um mehrere IKEA Trofast Regale übereinander zu stellen und zu verbinden. Es können die originalen Schrauben verwendet werden. Kein Bohren nötig. Druckdatei enthält einen rechten und linken Winkel. Pro Etage werden je 2…
Print approx. €0.62–€0.76 excl. taxPreliminary estimate for one variant
Der Würfel ist in 20, 30 und in 40 mm verfügbar. Schau dir auch gerne noch andere meiner Entscheidungwürfel an: https://www.printables.com/de/social/256636-seemomster/collections/164612
Print approx. €0.38–€0.47 excl. taxPreliminary estimate for one variant
This is a complete set of organizers for all cards and components of Dungeon! the board game to keep your table tidy and allow you to focus on the game. Each tray has an optional lid that you can use to store everything in the respective…
Print approx. €3.21–€3.93 excl. taxPreliminary estimate for one variant
ENGLISH: Since the door handle cover on my workshop door was finally broken due to age, and probably also due to a strong, accidental blow, I quickly drew a new one. Maybe there are some people who need something similar. You are welcome…
Print approx. €1.20–€1.46 excl. taxPreliminary estimate for PETGSource material: PET
Display stand for Trekkie's Gom Jabbar model (scaled to 160mm) labeled in Orthodox Herbertarian font . This is my first model, so I'm afraid I used primitive Harkonnen techniques (TinkerCAD), but it's functional. Photos are of a quick…
Print approx. €1.17–€1.43 excl. taxPreliminary estimate for one variant
Based on the 2014 movie, “Edge of Tomorrow” , which was an adaptation of the Hiroshi Sakurazaka novel, “All you need is kill” (2004) , this remix adds to the excellent model provided by Captain Crunch. This was a multi-week project, but…
Print approx. €2.04–€2.49 excl. taxPreliminary estimate for one variant
I printed it with 0.25 nozzle and 0.1mm layer hight, but you can try it with 0.4n too! I made it with a wood containing filament just for testing the small nozzle. It was not the best settings because the lack of retraction, but I wanted…
Print approx. €0.61–€0.74 excl. taxPreliminary estimate for one variant
Eine Lehre um sich die 17° vor OT Markierung auf dem Lüfterrad schnell und einfach zu erstellen um damit dann die Zündung einzustellen. Gedruckt in PETG im Profil 0,15mm Structural. Viel Spaß beim Drucken! Wenn Euch das Modell gefällt…
Print approx. €0.29–€0.35 excl. taxPreliminary estimate for PETGSource material: PET
Wegen der mechanischen Belastbarkeit wird das Infill mit 100% empfohlen.
Print approx. €0.22–€0.27 excl. taxPreliminary estimate for one variant
NEMA17 Verbindungsbox / Nema17 junction box Top: GX16 coupling Button: PG16 cabel gland M2 screw and melting nuts nedded The clip is missing…online soon
Print approx. €1.61–€1.97 excl. taxPreliminary estimate for one variant
Das Beladen des Filaments zum Buffer ist wegen der Beengtheit erschwert. Mit den an der Decke montierten weiten schwenkbaren Einlass-Trichtern wird dieser Vorgang erleichtert. Durch die Zwangsführung in der Mitte der Spule wird ein…
Print approx. €0.15–€0.18 excl. taxPreliminary estimate for one variant
Y-connector to mound on the opposite side of the wall as the wall-duct . With the Y-connector you can attach 2 hoses to connect e.g. 2 air conditioning units. inner diameter 3,94in Y-Verbinder zum Anbringen auf der gegenüberliegenden…
Print approx. €5.89–€7.20 excl. taxPreliminary estimate for PETGSource material: PET
sorry about the smudge, I used very old and dirty filament
Print approx. €1.72–€2.10 excl. taxPreliminary estimate for one variant
This is a 33 hour print on the INDX. This is part of a Pinball Topper project I am doing, and the sculpture is based off the Princess Donut from the pinball being made by Multimorphic. Donut is a Tortoise Shell Persian, and let me tell…
Print approx. €30.98–€37.87 excl. taxPreliminary estimate for one variant
This remix of the Prusa Core One dust filter offers a sturdier and more user-friendly solution for the vent openings. Improvements over the original design: Reinforced cover construction for better durability Increased clearance between…
Print approx. €0.62–€0.75 excl. taxPreliminary estimate for PETGSource material: PET
Just for fun, a Munchkin Dungeon meeple.
Print approx. €0.22–€0.27 excl. taxPreliminary estimate for one variant
Der Würfel ist in 20, 30 und in 40 mm verfügbar. Hier gibt es einen kompletten Noten Entscheidungswürfelsatz: https://www.printables.com/de/model/220176-noten-entscheidungshilfe Schau dir auch gerne noch andere meiner Entscheidungwürfel…
Print approx. €0.38–€0.47 excl. taxPreliminary estimate for one variant
Use ABS or ASA. Try it without support.
Print approx. €0.22–€0.27 excl. taxPreliminary estimate for one variant
Do you ever forget whose turn it is to roll the dice in Dungeons, Dice & Danger? This simple player token is the perfect solution! Just place it in front of the player who rolled last, and you'll never be lost again. The token is small…
Print approx. €0.20–€0.24 excl. taxPreliminary estimate for one variant
Dungeon Keeper 2 Coaster - For Single Extruder Dual-Color Printing Top Side: Features the iconic DK2 Horned Reaper design. Bottom Side: Displays the classic Bullfrog logo. Important Information If you see the warning: “A filament…
Print approx. €0.74–€0.90 excl. taxPreliminary estimate for one variant
Quick release cable, IDC Connectors holder Post connector for 26 Pin. Schnellverschlussverbindung, IDC-Steckerhalter, Pfostenstecker für 26 Pin Die awh 24g-e202-idc 24 Pin steckerleiste sind schwer zu bekommen darum bau ich sie aus 26 Pin…
Print approx. €0.99–€1.21 excl. taxPreliminary estimate for one variant
A insert to hold the cards and tokens for “Harry Potter - Kampf gegen die dunklen Mächte” by Ravensburger Games. Fits the original box (german release). Einsatz für die Karten und Tokens vom Ravensburger Spiel “Harry Potter - Kampf gegen…
Print approx. €4.15–€5.08 excl. taxPreliminary estimate for one variant
This model is based on SRTM 90m projected in WGS84 at 1:200000 scale when printed at 210mm x 250mm x 5.7mm (Like on a Prusa MK4). This means at the designed scale, 1cm on the model represents 2km. The horizontal contour bands represent…
Print approx. €23.89–€29.20 excl. taxPreliminary estimate for one variant
Atomic Skibindungsplatte 10mm Atomic ski binding plate 10mm - if you a a shorter leg, you need a plate
Print approx. €7.09–€8.66 excl. taxPreliminary estimate for one variant
This is a simple mask for SCT collimation. It can be printed in different materials of your liking (gluestic recommanded for PLA). Pictured is PETG leftover filaments used but I suggest you print it black of use anti-relfection material…
Print approx. €1.59–€1.95 excl. taxPreliminary estimate for PETGSource material: PET
Like those only selfprinted: https://www.amazon.de/dp/B09MKQ2WHS/ref=cm_sw_r_apan_dp_3J570R1WP7Q4HK9AA3YS?th=1
Print approx. €8.44–€10.32 excl. taxPreliminary estimate for one variant
Ersatz für alte Kermi Heizkörper Verkleidungsklammern
Print approx. €1.73–€2.12 excl. taxPreliminary estimate for one variant
connecting corners for 8mm thick panels Printed with 0.15mm Profile 205c° PLA -----------------Deutsch------------------ Verbindungsecken für 8mm starke Platten Gedruckt mit 0.15mm Profil 205c° PLA first time doing any type of cad…
Print approx. €6.69–€8.17 excl. taxPreliminary estimate for one variant
Die abgebildete Leiste besteht aus einem 3'er Set von Magnetleisten, der Länge 45 cm. Durch die Biegeradien ergibt sich eine Gesamtlänge von knapp 138 cm. Jedes Blendenteil ist 23 cm lang, das passt dann sehr gut zu den Leisten. Die…
Print approx. €1.49–€1.82 excl. taxPreliminary estimate for PETGSource material: PET
Ein Podest damit man in einen Elektrokasten einen PI Zero 2W über das Netzteil stabil einbauen kann. Rastet in die vorgegebenen Löcher in der Box ein. A mounting platform that allows a Pi Zero 2W to be securely installed inside an…
Print approx. €0.73–€0.89 excl. taxPreliminary estimate for one variant
ein Gefäß für 10 bis 15 ml Aceton in das ein Stück Stoff z.B. Mullbinde eintaucht. Ein Ventilator sorgt für schnelleres Verdunsten und gleichmäßige Verteilung des Aceton- Dampfes. Bei Zimmertemperatur ist ein Modell aus ABS in 1/2 bis 3/4…
Print approx. €0.12–€0.14 excl. taxPreliminary estimate for PETGSource material: PET
Dune Crysknife Of Paul Atreides Gcode has split knife upright with dowels and organic supports.
Print approx. €0.98–€1.20 excl. taxPreliminary estimate for one variant
Bas-Relief of Stilgar (Javier Bardem) from the Movie Dune
Print approx. €20.77–€25.38 excl. taxPreliminary estimate for one variant
Update 28 July 26: regarding the seal at the bottom of the pot A user pointed out to me that the actual wall thickness at the bottom of the pot was not thick enough, resulting in a sealing problem. It took me a while to respond, and I…
Want to access even more models not found here ? Interested in supporting my efforts making free models for the world to enjoy? Check out my patreon page here: https://www.patreon.com/mz4250 or support me on Printables Clubs! Patrons have…
0.15 to 0.2 mm Layer 5 to 15 % Infill Support Free For extralarge version glue the parts is recommended Optional Teeth 0.1 layer Under 55 mm/s
This is a model of the Atreides Signet Ring from the movie Dune. You can find more of our Dune models like the box of pain or bull statue here The download contains the model ready to be 3D printed. It is placed on the print bed as we…
38 cm length, 25cm wings, articulated 7$/month >>> PATREON
i adapted the model to have a spot for magnets in the base. statblock https://www.dndbeyond.com/monsters/16957-mimic
The organizer includes the following components: 4 player boards (identical models except for using different letters: D, U, N, E) These can be printed in different colors, using a color swap to make the iconography more visible. Inspired…
A collection of the most common condition, status and effect rings for your D&D and PF gaming table. Sized to fit around medium bases or hang over larger miniatures. Included step and fusion 360 parametric source files so you can play…
This tile must be printed without support. I personally print it at .2 layer hight. It is a part of a set dungeon tiles that can be found here: https://www.printables.com/social/482937-pieter-stobbe/collections/384219 . I love to share…
Masterful Dungeons Stone Floors are designed as part of a fully modular dungeon system built for tabletop RPGs like D&D and other TTRPGs. These floor tiles are double sided , with each half connecting to each other with a allowing full…
I made this Volksvagen Baja Bug / Dune Buggy in Fusion 360 check out my other designs: https://www.thingiverse.com/soarpix/designs If you have any questions, let me know in the comments =) HAPPY PRINTING! Post-Printing Also check out my…
awesome Owlbear miniature The base features holes for magnets
TL;DR: No-lid-lift, suitable for vertical storage, fits sleeved cards (see last page of pdf), fast setup, and teardown insert for the boardgame Dune Imperium including its both published expansion. Pro Tip: shuffle the required components…
Persian Cat inspired from the book Dungeons Crawler Carl. We made it as a present for our friend :) How we put the glasses onto the cat: We put magnets on the 3D model inside the cat's eyes and on the back of the glasses. We have a store…
The Next Evolution of Dungeon Tiles Dynamod creates 3D printable dungeon tile systems that are highly modular with dynamically changing parts, making table top gaming more engaging than ever before. This is a sample pack, get all the STL…
I designed this 7 part dice set for a friend to turn into a mold for resin casting. Would not recommend to print these for direct use since it would be hard to make them "fair". Also recommend to print on a resin printer or very small…
Young Elf Druid Size: Medium (Elf) Type: Humanoid (Elf) Alignment: Neutral Good or True Neutral (common for druids) Armor Class: 16 (leather armor and shield) Hit Points: 33 (6d8 + 6) Speed: 30 ft. STR: 10 (+0) DEX: 12 (+1) CON: 13 (+1)…
brainrot udin din din dun
This tile must be printed without support. I personally print it at .2 layer hight. After printing you can easely snap the door loose and file away some loose material on the bottom of the door and underside of the door frame. After that…
This tile must be printed without support. I personally print it at .2 layer hight. It is a part of a set dungeon tiles that can be found here: https://www.printables.com/social/482937-pieter-stobbe/collections/384219 . I love to share…
Tired of displaying your GameCube lying flat on a shelf, lifeless and dull? Here's one stand that will make your GameCube come to life. This stand captures the instant in the boot animation, where the cube dunks down into the center.…
Want to access even more models not found here? Interested in supporting my efforts making free models for the world to enjoy? Check out my patreon page here: https://www.patreon.com/mz4250 Patrons have access to all my files in one…
Masterful Dungeons Modular Walls are designed as part of a fully modular dungeon system built for tabletop RPGs like D&D and other TTRPGs. These walls are separate pieces , not integrated into floor tiles. This allows you to freely…
There is a addition to make it move like the one in the movie! https://www.printables.com/model/807628-dune-thumper-functional With the release of Dune Part 2, I challenged myself to model a 3D printable model of the Thumper as seen in…
I really like this Model, printed it, painted it, Love it!
Masterful Dungeons Props are designed as part of the fully modular Masterful Dungeons system built for tabletop RPGs like D&D and other TTRPGs. These props are standalone pieces , intended to be placed freely on top of the floor tiles or…
!! You will find more for free / pay what you want in my ko-fi shop !! Ruined dungeon walls for the MagHex system for use in Gloomhaven and Frosthaven. Contains a 3x3 mm MagHex base. Prints well on .2 and even on .3 layer height.…
🌟 Presenting our newest creation: The Dune Sandworm Coaster! 🐛✨ Inspired by the movie of Dune, this 3D-printed coaster adds a touch of sci-fi into your everyday routine. Say goodbye to ordinary coasters and embrace an interactive…
Masterful Dungeons Clips are designed as part of the Masterful Dungeons modular dungeon system. These clips are used to securely connect tiles and components while still allowing fast assembly, disassembly, and repeated reconfiguration…
Insert for Dune Imperium with the expansion Rise of Ix. Fits in the existing card board insert. Designed for sleeved cards. The wall thickness is optimized for a 0.6 nozzle but can be printed with a 0.4 nozzle as well. Each file indicate…
Dungeons & Dragons 5th Edition Values and Concepts: Suggested Name: Kaelen Vancruz Race: Draconic (Draconic Bloodline: Bronze - Lightning Breath, or Gold - Fire Breath) Bronze would give him lightning breath, which could be visually…
This tile must be printed without support. I personally print it at .2 layer hight. It is a part of a set dungeon tiles that can be found here: https://www.printables.com/social/482937-pieter-stobbe/collections/384219 . I love to share…
I spent two months making all 13 Keys from the Golden Vault and now I'm sharing them! I was inspired by the beautiful art work in the adventure book and I thought it would be really fun to have real keys to hand to my friends! I have…
Orc Warriors (x5) Size: Medium Type: Humanoid (Orc) Armor Class: 13 (leather armor, shield) Hit Points: 15 (2d8 + 6) Speed: 30 feet STR DEX CON INT WIS CHA 16 (+3) 12 (+1) 16 (+3) 7 (-2) 11 (+0) 7 (-2) Darkvision: 60 feet Languages:…
I designed this snap-on gadget for Norwegian (Idun) ketchup and mustard bottles earlier this summer. I use this snap-on lid a lot and it makes it so much easier to balance the bottles on its head so I can easily use all of the contents.…
Based on the blade used by Duncan Idaho in the desert tunnel. Intended to be assembled with two ¼" (6mm) dowels. Overall length is approximately 30.5" (776.4mm). There are two versions of the STL. One has been broken into parts with a max…
Sandworm based on Dune 2021. Roughly the same size as the first player marker in the board game Dune Imperium. ~43mm in diameter. Designed to fit into my Dune Imperium insert https://www.printables.com/model/272184-dune-imperium-insert
This tile must be printed without support. I personally print it at .2 layer hight. It is a part of a set dungeon tiles that can be found here: https://www.printables.com/social/482937-pieter-stobbe/collections/384219 . I love to share…
I made a low poly version of my Princess Donut model! You can use it either as a Persian Cat model or just as Donut. NOT AI. Modelled in Zbrush / Blender. Rendered with Nomad Sculpt. I made this model as a gift for my friend who is a huge…
![Dune (2016) Bookmark [REMIX]](https://media.printables.com/media/prints/678296/images/5333641_0dbc8582-410d-49f9-aa4a-75932a4b03cb_6573fa64-e4ef-486f-a0df-b12dd4e97e35/dune.jpg)
