26 models
Model description The Embraer E195-E2 is a narrow-body medium-range twin-engine jet airliner, that can carry up to 146 passengers, manufactured by Brazilian aerospace manufacturer Embraer. It is fitted with two underwing-mounted Pratt &…
Model description The Embraer 190 is a narrow-body short- to medium-range twin-engine jet airliner, that can carry up to 114 passengers, manufactured by Brazilian aerospace manufacturer Embraer. The Embraer 190 is fitted with two…
https://www.thingiverse.com/thing:489709's Carabiner
Low detail model, can be altered/painted as desired. length determined by using either 160mm or 200mm upper frame.
This bracket allows you to mount a DE19 interface to the top rear of a Xiegu G90. You will have to replace 4 of the original M3 screws with M3x8 screws. You'll need to print two brackets one will need to be mirrored in your slicer. I…
Mounting bracket for BL192 and E192 DC motors from Micromotors. Rafts: Doesn't Matter Supports: Doesn't Matter Resolution: 0.2 mm Infill: 50%
probably a work in progress... I don't like using supports, pieces that would need supports have been split, but whole stls are provided as well - your choice. alignment tabs and slots are used to aid assembling the split parts. the upper…
Printed in PETG with 0.2 mm nozzle. Tested for ca 1500 km with no problems. The fit might be a bit tight and require some sanding on the axle, depending on the printer.
The Embraer E190-E2 is a modern, fuel-efficient regional jet developed by the Brazilian aircraft manufacturer Embraer. It is part of the E2 series, which is the second generation of Embraer's popular E-Jet family. The E190-E2 can seat…
Hey my 3D-Friends! I have designed a easy wall mount for these ASUS-Routers: ASUS RT-BE96U ASUS ROG RAPTURE GT-BE98 ASUS ROG RAPTURE GT-BE98 PRO ASUS ROG RAPTURE GT-BE25000 ASUS ROG RAPTURE GT-BE19000 ASUS ROG RAPTURE GT-BE19000AI Here…
Summary: This is a printable case with a cut (laser or otherwise) switch plate. Its primarily designed to be used with the Phantom PCB and Cherry Switches, but the plate allows for both Cherry MX style and Alps style switches, and both…
A custom skadis support i made, that allows you to mount the router vertically
Since my first published keybboard was The1987 (https://www.printables.com/model/299777-the1987-a-modular-retro-inspired-87-key-mechanical) and it's fairly popular, and its designed around the Phantom circuit board and Teensy 2.0, which…
This is a model of one of the two different brackets. The other one I used was from here https://www.thingiverse.com/thing:5894963 . The handle uses two different brackets. I created this one.,
Needed cheap and fast mount for my HIKMICRO TE19 2.0 to picatinny rail Printed with 0.2 layer height, PET-G, 100% infill on FLSUN V400 recommended to print on 90 degrees for strenght
gonna cut it to fit my printer, will upload pics when done!
A decent-but-not-perfect replacement terminal cover for the Canon LC-E19 battery charger. It fits okay but isn't perfect due to my lackluster Fusion skills. Fits decent enough to provide protection .
I've lost my cover for Thermo scope HIKMICRO TE19 2.0, diameter 45mm so i've made new simple one to cover front lens. Nothing fancy but usable and can be printed without support. I've drilled/cleaned pin hole after print, due small…
I created a mockup for others who are more creative than me to come up with better mount solutions. My solution does not optimize the routers capabilities, but functionally it works for me. Print the mounts on its side with supports for…
Description: Additional cooling by separate 1HE19 front plate/spacer fan for the Qotom Q20300G9_QDNV01. Model 1 : Crafted for folded Penn Elcon 1HE19 R1268/1UK (Blind) (~inner h= 41.6 d=10.2mm). x2 Ruthex M4 thread insert holes 5.6mm @…
A custom skadis support i made, that allows you to mount the router vertically
I've lost my cover for Thermo scope HIKMICRO TE19 2.0, diameter 45mm so i've made new simple one to cover front lens. Nothing fancy but usable and can be printed without support. I've drilled/cleaned pin hole after print, due small…
This bracket allows you to mount a DE19 interface to the top rear of a Xiegu G90. You will have to replace 4 of the original M3 screws with M3x8 screws. You'll need to print two brackets one will need to be mirrored in your slicer. I…
Needed cheap and fast mount for my HIKMICRO TE19 2.0 to picatinny rail Printed with 0.2 layer height, PET-G, 100% infill on FLSUN V400 recommended to print on 90 degrees for strenght
Hey my 3D-Friends! I have designed a easy wall mount for these ASUS-Routers: ASUS RT-BE96U ASUS ROG RAPTURE GT-BE98 ASUS ROG RAPTURE GT-BE98 PRO ASUS ROG RAPTURE GT-BE25000 ASUS ROG RAPTURE GT-BE19000 ASUS ROG RAPTURE GT-BE19000AI Here…
![[Remix]Republic Commando backpack by Jace1969](https://media.printables.com/media/prints/81f98ef6-2286-4ee0-9d58-7e3073b06890/images/11084886_d882fc2e-02b1-413b-afee-a55903b920b3_3151d1ad-b619-410a-9a0a-818d6d4887ba/screenshot-2025-11-04-201341.png)
