P
PrintablesSidious 01
BMW E30, E36, E46, E90, E34, E91 Schluesselanhaenger
BMW Schlüsselanhänger mit E30, E36, E46, E90, E34, E91
- Downloads
- 2,278
- Likes
- 166
- Rating
- 4.75
Search results: e90
Counting matching models…
P
Printablesflatsixguy
Cupholder V2 for BMW E90 E92 E93 etc.
You can now print it on the sloped, upper side to get a much better look! I could reduce the print time and used material by using the shell-command. If you use the textured PEI-sheet, you might get a nice finish on the upper side. So I…
- Downloads
- 2,194
- Likes
- 199
- Rating
- 4.6
P
PrintablesJerryie
BMW E90 M3/kit card
Use the pliers to separate the parts and then assemble the car. The model is on a scale of 1:64. To scale a model from 1:64 to 1:43, you need to use a scaling factor of 148.8% in the slicer Printing this model with multicolor produces a…
- Downloads
- 1,900
- Likes
- 328
- Rating
- 5
P
PrintablesMike770502
BMW E90 E91 E92 E93 Cupholder with lighter hole
I added a 29mm cigarette lighter hole and a bmw logo on top of Fix3D:s model. You should probably use the original model's slicer settings. I used mostly default settings and the print could have come out better:) The bottoms of the holes…
- Downloads
- 1,097
- Likes
- 77
- Rating
- 5
P
PrintablesMitch Muske
BMW E90 A/C Vent Adjuster
I created this for my 2011 E91, but it may fit others. Just pull the other parts out of the vent and snap this one on.
- Downloads
- 740
- Likes
- 73
- Rating
- 4.67
P
Printablesflatsixguy
Cupholder for BMW E90
This is an old version, head over to my profile for the newer, better one! So I was looking for a fitting cupholder for my BMW E90 tray and couldn't find one which wasn't too big. This one fits to your BMW E90 without the big navi and…
- Downloads
- 656
- Likes
- 71
- Rating
- 3
P
PrintablesLGM
BMW E90 E91 E92 E93 Cupholder
BMW E90 E91 E92 E93 Cupholder for 0.5 l PET and RedBull can
- Downloads
- 590
- Likes
- 43
- Rating
- 3
P
PrintablesGandaZSW
BMW E90 WallArt Silhouette Outline
A silhouette of BMW E90. For bigger prints i recommend cutting and then welding/gluing together.
- Downloads
- 526
- Likes
- 57
- Rating
- 5
P
PrintablesJohn Marshall
BMW E90 Cabin filter front mount
Use ABS preferably but it wont get that hot up top where this print is located so anything will work
- Downloads
- 430
- Likes
- 53
- Rating
- 5
P
Printableslambonorbi
BMW E90|E91|E92|E93 Mirror accessory / keychain
I modelled a mirror accessory / keychain for E90 series fans. Easy to print, no support required. Enjoy, happy printing!
- Downloads
- 312
- Likes
- 34
- Rating
- 4.5
P
PrintablesDammDaniel
Bmw E90 Keyring
Has two colors, back color and front color First print the back color then before layer 16 starts (at 0.2mm layers) you change the filament I use the Filament Change plugin from Cura, it stops the print before layer 16 (or what layer you…
- Downloads
- 240
- Likes
- 23
- Rating
- 0
P
PrintablesYangorang
Panel Lock Tool for BMW E90
A little tool I printed to turn those pesky panel locks on my BMW E90….I had previously been trying to use either a big coin or a huge screwdriver but they inevitably seem to mar up the edges of your panel locks until they just get harder…
- Downloads
- 235
- Likes
- 41
- Rating
- 5
P
Printablesdakov
bmw e90 cupholder
1. Print it and then use super glue to connect them. 2. Use double adhesive tape to mount it in place.
- Downloads
- 225
- Likes
- 56
- Rating
- 0
P
PrintablesLuky Longi
Brake Duct BMW E92 E90 M3
It is necessary to make a hole in the original bumper cover and mount the model there.
- Downloads
- 223
- Likes
- 30
- Rating
- 0
P
PrintablesPitrus3D
BMW E90 Car Outline Wall Art
BMW E90 Car silhouette model on a stand! It's perfect as a desk decoration. The model includes a set consisting of a car silhouette and a stand. Dimensions: Car: 209,9 x 61.8 x 3 mm Stand: 127 x 20 x 4.25 mm Settings: 0.2 mm layer 2 walls…
- Downloads
- 219
- Likes
- 35
- Rating
- 5
P
Printableskmax
AirBag E90 Decorative Cap
Hi all! I present the model of decorative airbag cover for BMW E90. I made two models, one with text and one flat without any text. I was never able to print a version with an inscription in acceptable quality. In the end, I drive with…
- Downloads
- 174
- Likes
- 9
- Rating
- 0
P
PrintablesBik_Craft
bmw e90/e91/e92 cupholder
Adjusted the model for it to fit perfectly without cutting imporant parts of the car.
- Downloads
- 153
- Likes
- 16
- Rating
- 0
P
PrintablesPhoto Type
BMW e90 (2007) headlight dust cover
Headlight cover for car BMW e90 i made from measureing an original you may need to adjust on long side to be a bit shorter but i printed it as is and it worked fine, printed it on elegoo mars 3 with abs-like resin.
- Downloads
- 141
- Likes
- 23
- Rating
- 0
P
PrintablesJoseph C.
BMW E90 Cup Holder Bottom
Right here is the bottom of the cup holder found within the BMW E90 (E9X). I spent well over 8 hours working on this so I would appreciate if you don't use my work for commercial uses. I made about 12 copies of this part before I was…
- Downloads
- 136
- Likes
- 38
- Rating
- 5
P
PrintablesFW
(E90 E91 E92 E93 E87) strut mount dust cover
use TPU or some other flexible filament
- Downloads
- 130
- Likes
- 14
- Rating
- 0
P
PrintablesKrystan Krakowiak
BMW e90 Plug between wipers 7169481
I used petg for this use organic supports
- Downloads
- 104
- Likes
- 13
- Rating
- 0
P
PrintablesSam McLeod
BMW E90 Rear Window Shade Clips
A friend of mine has an E90 and lost the clips that hold the (rear) window shades in, he was looking everywhere for them and couldn't find any at a reasonable price so I had a crack and modelling and printing them for him. They're pretty…
- Downloads
- 103
- Likes
- 17
- Rating
- 0
P
Printablesreinerv333
Kabelkanalecke90° 15x15mm
Kabelkanal Ecke Hochkant für Kabelkanal 15x15mm als Abschluss und als Verbinderprofil.
- Downloads
- 94
- Likes
- 9
- Rating
- 0
P
Printablescryptobits
E90 E9X Mount for F20 F30 8HP Shifter
This is a mount to put an F20/F30 8HP shifter in an E90 that came with an automatic. It is intended to re-use the stock rubber gasket from the original shifter. It needs supports drawn in around the nut retainers on the bottom, I do not…
- Downloads
- 85
- Likes
- 2
- Rating
- 0
P
PrintablesArcaneNomen
BMW E90 Rear Lamp Pin
Did you lose this pin down the tailgate where it will rattle for years? Or maybe you broke it while replacing bulbs? Or it just fell apart after almost 20 years of service? Well I made a (better than) OEM option which is optimized for…
- Downloads
- 79
- Likes
- 19
- Rating
- 0
P
PrintablesMartin Olík
bmw E90 reduction cupholder
jde jen o redukce v napojovem drzaku drzak mam u me v modelech také
- Downloads
- 70
- Likes
- 9
- Rating
- 0
P
PrintablesMixPrinters
BMW E90/91 Touring
Replica of the BMW E90/91 Touring optimized for 3D printing. The model includes the body and individual wheels. For best results, it is recommended to use supports in the wheel arches and at the mirrors.…
- Downloads
- 69
- Likes
- 4
- Rating
- 0
P
Printableskenshin86
Plastic Grommet 51131840154 for BMW E30, E36, E46, E90, E92
E30 (and many other chassis) plastic grommet used in the front grill installation and rear license plate.
- Downloads
- 67
- Likes
- 18
- Rating
- 0
P
Printablesodonnell944
BMW E90 xDrive Transfer Case Mount Insert
I originally started selling these in 2022, but decided to release the files for free. PowerFlex blatantly copied my design in 2024, so now there is very low demand. So, as a gesture to PowerFlex (perhaps a gesture involving a certain…
- Downloads
- 66
- Likes
- 10
- Rating
- 0
P
PrintablesDZa
BMW E90 sac clutch centering tool
This is a centering tool designed for the precise installation of a SAC clutch disc between the flywheel and the pressure plate on a BMW E90 from the year 2011. Due to its adaptable design, the tool may also be compatible with models from…
- Downloads
- 55
- Likes
- 9
- Rating
- 0
P
Printablesreinerv333
KabelkanalEcke90° 15x15mm
Eine Linke und Rechte Ecke für Handelsübliche Kabelkanäle 15x15mm zum Kabeldurchführen mit einem Radius .
- Downloads
- 42
- Likes
- 3
- Rating
- 0
P
PrintablesMarek Giża
BMW E90 Hella adapter remove high beam bi led conversion
This is my modified adapter for BMW E90 headlights with Hella housings , designed specifically for Bi-LED projector conversions where the original high beam mechanism is removed . The goal of this modification is easy installation, better…
- Downloads
- 40
- Likes
- 6
- Rating
- 0
P
PrintablesAntony Brotherton
Console Ashtray cigarette adapter accessory plate for BMW e90/e91
When I bought my e91 it had no front console cigarette lighter which meant I had to use an after market accessory plugged into the armrest socket. The unit was then wedged between the console and the passenger seat. Less than ideal. This…
- Downloads
- 31
- Likes
- 2
- Rating
- 0
P
PrintablesFrontier
C23/E90 gimbal lock system (Typhoon H Plus / H520)
Gimbal lock system (pin and clip) for the C23/E90 camera for Yuneec Typhoon H Plus / H520. Print Settings Printer Brand: Creality Printer: CR-X Rafts: Doesn't Matter Supports: No Resolution: 0.1 Infill: 100% Category: R/C Vehicles
- Downloads
- 29
- Likes
- 2
- Rating
- 0
P
PrintablesYPUpro
REPAIR part for E90 E91 Air vent grille (64 22 9 151 167)
To repair a broken mount for a lever, you need to bore the wheel for the repair part, then drill a through hole for the fastener (in my case, I used M2 screws, i.e. the hole should be 2 mm) after positioning the part, drill a second one…
- Downloads
- 21
- Likes
- 6
- Rating
- 0
P
PrintablesJohn
Gridfinity N (E90) Battery holder
Holder for a little known battery size that I couldn't find anywhere. This is a 1x1 Gridfinity holder for five N (E90) batteries.
- Downloads
- 20
- Likes
- 2
- Rating
- 0
P
PrintablesSable147
5x Sennheiser e904 Tray
A tray that holds 5 Sennheiser e904 microphones so that they take up minimal space in the case drawer without flying around. It features a space for 19mm spike tape for labeling as well as slots to easily grab the mics.
- Downloads
- 15
- Likes
- 6
- Rating
- 0
P
Printablesgmerick
Bruce Patterson’s “Cube90”
Description on the Pyrigan blog. Adaptations: Voxel size =34 (this is a larger puzzle). Only a sample of pieces are uploaded as STL, the full 90 piece set are in the Zip files, sorted by G Bell's coloring scheme in his .xmPuzzle file. I…
- Downloads
- 15
- Likes
- 3
- Rating
- 0
P
PrintablesLOAFFETTE
iPod Mini BMW E90 holder
A 3D printable iPod Mini holder for the BMW e90, with a hole for a 30-pin connector to go through the bottom. Use PETG
- Downloads
- 12
- Likes
- 2
- Rating
- 0
P
PrintablesMarc Bogadi
CamShaft-Idle90°
example HappyHare Servo Config selector_gate_angles: 172, 149, 122, 65, 39, 15 # Optionally set default list of gate angles (overriden by calibration) selector_bypass_angle: 95 # Optionally set default servo angle when bypass is selected,…
- Downloads
- 10
- Likes
- 1
- Rating
- 0
P
PrintablesArtman
BMW e90 sedan keychain wheels
Please like before downloading the model . Thank you so much for your support ✌ 3 stl. keychain car siluet
- Downloads
- 6
- Likes
- 0
- Rating
- 0
P
PrintablesDorinyan
LightBase900 Baseplate
I used this plate to create a flat base to build a japanese garden on. Split in two parts so it fit my SV08, connected with 3xM4 flathead screws. Feel free to remix, adjust or just go nuts. Fusion360-File provided.
- Downloads
- 5
- Likes
- 0
- Rating
- 0
P
PrintablesMax D
Joyroom bluetooth adapter handsfree holder for BMW E90
Holder for the Joyrooms bluetooth adapter / handsfree, for bmw E90. Hope to solve some mounting problems. Feedback is always welcome! If you find this model useful, a rating or a comment would be highly appreciated.
- Downloads
- 5
- Likes
- 2
- Rating
- 0
P
Printablesnagelwerkstatt
ESX VE900.7SP dummy
A simple dummy to test if it would fit. https://esxaudio.de/ve900.7sp.html
- Downloads
- 3
- Likes
- 0
- Rating
- 0
P
Printables
BMW e60-e90 Sport Air Filter Adapter – Custom 3D Printed Intake Adapter
This custom-designed BMW intake adapter is engineered to connect a sport air filter directly to the intake system, providing improved airflow and a cleaner installation compared to universal solutions. The model features a smooth 180°…
P
Printables
Clip Interior BMW E90 Clip Dashboard
Clip for BMW E90, E91 or E92, for dashboard trims. Original color of clips Blue. Print Settings Printer Brand: Creality Printer: Ender 3 Pro Rafts: Yes Supports: Yes Resolution: 0.2 Infill: 20% Filament: Generic ASA Generic ASA Category:…
