12 models
A simple under desk mount for a Western Digital EasyStore external hard drive. Each side secures to the underside of the desk with 2 screws. Features For extra peace of mind , you can add a velcro strap to the back to prevent any chance…
Western Digital hasn't changed the form factor of their My Book/easystore hard drives for a very long time. Shaped almost like a “D” from the side, you can run these hard drives vertically or horizontally. I generally prefer to run mine…
The pins holding the hard drives in Asus easyStore h340 are starting to break for me. The rubber is is old and snaps in half when handling. So I made 3D printed replacements. Installation The pin is keyed. Put it in and rotate 90° to lock…
@RetroFrog's original design did not fit my WD EasyStore HD, so I redesigned it to fit these hard drives.
This is a simple 2-part stand for a pair of WD easystore 3.5" external hard drives that incorporates a 120mm PC case fan for cooling. The newer easystores have a nasty tendency to overheat, and this solves that problem. You can screw the…
Once you shuck the drives from an EasyStore enclosure, you're left with a perfectly good SATA to USB adapter board. Now the PCB can just be clipped into this simple case for reuse without risking shorts! This is a simple press fit, but…
This is a wall mount that fits the WD EasyStore series of external hard drives. It was designed so you can put 2-3 wood screws in it and then a velcro strap, zip tie, etc through the slots to keep the drive in. Those are optional though.…
I had one of these old NAS's lying around as the motherboard went quite a few years ago. I stumbled upon people reviving the case by adding a low powered cpu/motherboard into it. This is to be used in place of the front panel PCB. I had…
I designed this shroud to keep my 14TB EasyStore cool as it would consistently run around 55C which is way too hot for a drive. After this mod, my temps are typically 31C which matches that of the drives in my computer case with dual…
3.5" hard drive case for shucked WD Easystore controller boards. Use boards from Easystore externals with any 3.5" drive. Connected with hex screws, you'll need: M3x4.0mm, OD4.6mm Heat Staking Threaded Inserts M3 x 16mm Hex Socket Head…
This is a blade remix for the amazing https://www.printables.com/model/186619-modular-mini-server-case I needed a blade that fit the WD - Easystore 5TB I use for my Plex media. I kept it easy to print by printing each piece and just…
