P
Printablesdarryl12123
Ecowitt WS90 Wall Mount
Wall mount for a Ecowitt WS90 weatherstation. To mount outside: Print in PETG Screws 4x40mm stainless steel
- Downloads
- 377
- Likes
- 19
- Rating
- 5
Search results: ecowitt
Counting matching models…
P
PrintablesDough29
Ecowitt WS90 Wall Mount with cable hole
Made this remix so we can mount the WS90 by routing the cable through the mount.
- Downloads
- 193
- Likes
- 12
- Rating
- 5
P
PrintablesOndřej Hladík
Ecowitt GW1100 case/mount
Case with holder for Ecowitt GW1100 Wi-Fi gateway. The holder allows you to place the gate anywhere you want. Printing without supports, Infill: 15%. Share your printed model.
- Downloads
- 105
- Likes
- 11
- Rating
- 5
P
PrintablesBenny
Ecowitt WH31 stand
Ecowitt WH31 stand Print Settings Printer Brand: Prusa Printer: I3 MK3S Rafts: No Supports: No Resolution: 0.2 Infill: 15 Filament: unknown PLA Category: Household
- Downloads
- 101
- Likes
- 5
- Rating
- 5
P
PrintablesTeodor Hristov
Ecowitt WS90 - 7-in-1 weather station stand
Powered by Shelly Ecowitt WS90 - 7-in-1 weather station stand for flat surfaces
- Downloads
- 77
- Likes
- 5
- Rating
- 0
P
Printablesdairiki
Ambient Weather (Ecowitt) WH31 stand
A stylish stand for an Ambient Weather WH31 temperature/humidity sensor. I think the thermometer is the same as the Ecowitt WH31. (I believe Ecowitt makes the Ambient Weather product.) Printed on a Prusa Mini+, 0.2mm layer height, 2…
- Downloads
- 63
- Likes
- 4
- Rating
- 5
P
PrintablesAlvomane
Ecowitt WS90 25mm railing mount for 42-45mm M8 pipe clamp | Ecowitt WS90 25mm Geländerhalter für 42-45mm M8 Rohrschellen
EN: With this adapter, an Ecowitt WS90 weather station can be mounted on pipes or railings up to 45mm in diameter using a standard M8 pipe clamp. The adapter has a diameter of 25mm and a recess especially for the WS90 power connection…
- Downloads
- 63
- Likes
- 8
- Rating
- 0
P
PrintablesLyricon
Adjustable stand and wall mount for weather station rain gauge (Ecowitt, Froggit, Fine Offset, Ambient Weather)
My Froggit weather station includes the Froggit DP80 rain gauge. It came with a 32mm, 200mm long, mounting pole and brackets to screw to the rain gauge. This design has a ball that fits around the pole and a joint type stand to screw to a…
- Downloads
- 47
- Likes
- 8
- Rating
- 0
P
Printablesidcrook
Ecowitt WittBoy WS90 Weather Station Sensor Array Birdhouse Pole Stand Adapter
Adapted a birdhouse segmented pole (from a birdhouse mount kit) to use as stand for Ecowitt WS90 weather station sensor array. The adapter fits on end of one segment of the pole. The other end of the adapter is for the 1-inch pole mount…
- Downloads
- 36
- Likes
- 5
- Rating
- 0
P
PrintablesJan Stanka
Ecowitt sensor radiation shield
[EN]: Radiation shield with 6cm inner diameter and 12 cm outer diameter. Harware-less assembly. Print from ASA/ABS upside down, then glue bowls together. Bowls and Cap without supports. The mount with tree supports. [CZ]: Radiační štít…
- Downloads
- 35
- Likes
- 3
- Rating
- 0
P
Printablespapinist
Bird defense\Spike ring for Ecowitt weater station rain gauge
Spike ring to avoid birds pooping in my rain gauge. This fits ecowitt's weather stations\rain gauge (about 11 cm dia.) I got the idea from @halfdink's thing, but designed it completely from scratch. Support me! If you want, you can…
- Downloads
- 29
- Likes
- 2
- Rating
- 0
P
PrintablesBoXJakub
Ecowitt WH32
Sensor stand - wh32 Ecowitt Bardzo Fajny stojak do czujnika pokojowego. A very nice stand for the sensor!
- Downloads
- 26
- Likes
- 2
- Rating
- 0
P
PrintablesMichael Whitley
Ecowitt GW3000 Cover
This is a cover for the Ecowitt GW3000 Gateway. The cover is designed to give the gateway a refined look when mounted to the wall or sitting on a flat surface. It does not interfere with the operation, ports, or airflow. It also contains…
- Downloads
- 21
- Likes
- 5
- Rating
- 0
P
PrintablesDragonClips©
Ecowitt sensor & thermal shield support
for Ecowitt WN32, TN31, WH57, WH32 sensors Pole diameter 34 mm (or wall mount) Printed from PETG layer 0.25 no supports Thermal shield used: https://s.click.aliexpress.com/e/_oCWC4dv (no affiliate links)
- Downloads
- 19
- Likes
- 1
- Rating
- 0
P
PrintablesMikoa
Adapter / Halterung Ecowitt WS90 Wetterstation auf ~ 50 mm SAT-Halterungsstange
Ein Adapter / eine Halterung, um eine Ecowitt Wittboy WS90 Wetterstation auf eine vorhandene SAT-Halterungsstange draufzusetzen. SAT-Stange hat einen Innendurchmesser von 49,8 mm (ohne Schutzkappe auf der Stange) auf Ecowitt 27 mm…
- Downloads
- 19
- Likes
- 0
- Rating
- 0
P
Printableschal
Magnetplate for Ecowitt GW1100 case/mount
This is a magnetplate to screw on the mount. You need 4xM4 ~10mm Screws and 8x6x3 Magnets.
- Downloads
- 19
- Likes
- 1
- Rating
- 0
P
PrintablesCPS_Systems
Ecowitt Gateway Stand Desk Shelf GW1200 GW1000
Ecowitt Gw1000, GW1100, GW1200 IOT Wi-Fi Gateway with Built-in Temperature/Humidity desk stand holder. USB cable end size: 18mm wide x 10mm high x 26mm long Several temporary supports in the cable opening that can be easily removed with a…
- Downloads
- 16
- Likes
- 3
- Rating
- 0
P
Printablesmmmmmgood
Ecowitt LDS-01 Rain Barrel Mount
This print holds an Ecowitt LDS-01 on top of a rain barrel. I purchased rain barrels through rainbarrel.ca and wanted to mount my new Ecowitt LDS-01 laser distance sensor to be able to determine the amount of water in the barrel. These…
- Downloads
- 15
- Likes
- 0
- Rating
- 0
P
Printablesjopi63
Wandhalterung für Ecowitt HP2560 / Froggit HP2000 Wetterstation
Diese passgenaue Wandhalterung ermöglicht es, die Konsole der Wetterstationen Ecowitt HP2560 oder Froggit HP2000 sicher und platzsparend an der Wand zu montieren. Da das Originalgerät primär für das Aufstellen konzipiert ist, schließt…
- Downloads
- 13
- Likes
- 2
- Rating
- 0
P
Printablesjufy111
Ecowitt temp and humidity sensor case WH31/WN31
I wanted to adapt my Ecowitt temperature and humidity sensor so that it can fit in the AMS for my BambuLab X1C. This 3 part enclosure refits the electronica for the Ecowitt WH31/WN31 Temperature and humidity sensor. Dimensions are…
- Downloads
- 13
- Likes
- 3
- Rating
- 0
P
PrintablesMarcin K
Meteorological shelter for Ecowitt sensors
A weather shelter for Ecowitt sensors. A housing designed for mounting the Ecowitt WN31A sensor outdoors. It provides ventilation and protection against rain, and reduces heat radiation from the wall. It should be printed using white…
- Downloads
- 12
- Likes
- 0
- Rating
- 0
P
PrintablesFroeForge
Ecowitt Wittboy 29.5mm pole mount
I still had the mounting hardware for my old weather station installed. The mounting pole outer diameter of the old one is around around 29.5mm ish. The inner diameter on this remixed version of the pole adapter is around 29.6 in the…
- Downloads
- 11
- Likes
- 1
- Rating
- 0
P
Printablesmeisnick
Ecowitt WH40H Wall Mount
A slip on/off interference fit wall mount to allow for easy install and removal for cleaning I found that mounting the rain bucket in a inconvenient or high place made it impossible to clean. mounting on the inside of a overhang beam put…
- Downloads
- 8
- Likes
- 1
- Rating
- 0
P
Printables
Ambient Weather (Ecowitt) WH31 stand
A stylish stand for an Ambient Weather WH31 temperature/humidity sensor. I think the thermometer is the same as the Ecowitt WH31. (I believe Ecowitt makes the Ambient Weather product.) Printed on a Prusa Mini+, 0.2mm layer height, 2…
P
Printables
Ecowitt Gateway Stand Desk Shelf GW1200 GW1000
Ecowitt Gw1000, GW1100, GW1200 IOT Wi-Fi Gateway with Built-in Temperature/Humidity desk stand holder. USB cable end size: 18mm wide x 10mm high x 26mm long Several temporary supports in the cable opening that can be easily removed with a…
P
Printables
Ecowitt WS90 Wall Mount with cable hole
Made this remix so we can mount the WS90 by routing the cable through the mount.
P
Printables
Ecowitt sensor radiation shield
[EN]: Radiation shield with 6cm inner diameter and 12 cm outer diameter. Harware-less assembly. Print from ASA/ABS upside down, then glue bowls together. Bowls and Cap without supports. The mount with tree supports. [CZ]: Radiační štít…
P
Printables
Ecowitt WittBoy GW2001 Pole Adapter
Adapter to mount the GW2001 to a 1.5in pole. Allows the heater cable to be passed though. I've printed in white PLA with a spray UV coating.
P
Printables
Ecowitt HP2551 Skadis Mount
Skadis mount for Ecowitt HP2551. Fits into the holes in the back of the device. Attached mlrkey's skadis mount (https://www.thingiverse.com/thing:5257623) Print with supports
P
Printables
plate for ecowitt Weather station
I made that plate to mount my Ecowitt WS2910 on top of a wooden structure. I printed it in PETG but ASA would maybe be even better. I used Spax 3.5 woodscreew to mount it.
P
Printables
Ecowitt WH43 wall mount
A wall mount for my Ecowitt WH43 which should be used indoor only. I decided to ignore it by creating a wall mount for this. The mount has holes for zip ties as well. Should be printed with a material which doesn't care about weather…
P
Printables
Easy view stand for Ecowitt WS2910
A simple print for the Ecowitt 2910 console. This stand lifts the console up and positions the screen at 10º tilt, so it's viewable from more locations. The original stand tilts the console back too far. Print on its back. No supports…
P
Printables
Ecowitt WS69 Detachable Mount and Bracket
I use this to bring our weather station sensor down for cleaning as it is mounted 4m above the ground. Current design uses a survey level pole for the cradle, but it should be easily adaptable to other poles. Consists of: A mount to fit…
P
Printables
Ecowitt WH57, WH32 holder
Simple holder WH57, WH32 for pipe diameter 60mm printed from ASA275 layer 0.2 without supports 2x UV stable binding strip 280x4,5 mm
P
Printables
Ecowitt WH57, WH32 holder - radiation shield
Holder WH57, WH32 for pipe diameter 60mm printed from ASA275 layer 0.2 without supports adhesive for bonding plastic, I used Loctite 406 screew 4x M3x10 innox 2x UV stable binding strip 280x4,5 mm print 1x part A, 7x part B(B+), 1x part…
P
Printables
Ecowitt Thermometer Holder for P1P ARC Enclosure
Designed for the W31, but other similar Ecowitt models should also fit. Made to attach behind the door handle in the Bambu P1P ARC enclosure, to position the sensor at the top of the chamber to monitor the active print area temperature.…
P
Printables
Fence Bracket for ecowitt WH57/WH32 Solar Shield
The bottom and fence bracket are connected with a dovetail and use a single M4x20 countersink screw to secure the bottom to the bracket. No nut is needed since it will make its own threads. This will make a solid connection. Print the…
P
Printables
Bird spikes for Ecowitt WH40 rain collector
Bird spikes for the Ecowitt WH40 rain collector, which has a 182mm diameter. I didn't have metal wire at hand, so I used PETG and printed some spikes using the “cylinder primitive” in Orca / Prusa slicer. Onshape link