Counting matching models…
This is a dustcover for the battery mounting plate for the Pendix eDrive e-bike system. Print instructions In the 3mf files for both PLA and PETG I added modifiers for the following. 1) first 2mm is printed with 100% infill because this…
Print approx. €2.65–€3.24 excl. taxPreliminary estimate for PETGSource material: PET
For holding the LTT Linus Tech Tips Scribedriver Bolt Action Pen. Has room on the back for 8mm wide magnets. Make sure to use strong magnets as there are 2 layers of space between the pen and magnet. I taped in the magnets instead of…
Print approx. €1.08–€1.31 excl. taxPreliminary estimate for one variant
This model could share some of it's looks with another great wall mount. Some of their ideas I used in my design. Although I drew every line myself. There is one problem I have with mounting a gaming console of over 3kg's on my wall. I…
SafeDrive & MagSafe Mount V2 for BMW i3 Compatible with the latest version of Safedrive and older MagSafe pucks (non-braided cable versions). Fit for iPhone 15
SafeDrive Mount for BMW i3 Compatible with the latest version of Safedrive
My single complaint about the Scribedriver is that they are too thin for my hands, making them uncomfortable to write with. To solve this, I 3D printed pen grips out of TPU for the Scribedriver. The TPU material still comes out harder…
Designed to comfortably hold ikea drill, but might work other tools. Main objective was to be securely hold the tool and as a space saving measure on my workbench. It came out somehow satisfying to use , because it happens to fit the tool…
This model could share some of it's looks with another great wall mount. Some of their ideas I used in my design. Although I drew every line myself. There is one problem I have with mounting a gaming console of over 3kg's on my wall. I…
I was actually thinking about this last night, and realized there was already a stamp contest. This was fun to make!
SafeDrive & MagSafe Mount for BMW i3 Compatible with the latest version of Safedrive and older MagSafe pucks (non-braided cable versions). Includes a loop on the back of the arm for securing cables with a zip tie.
Remix of model from @3Driv_2738116 - Customized for the screwdriver in the MK4S Kit Customized the fit and flair for the screwdriver provided in the MK4S printer kit. The square recess holds the screwdriver tight in the mount so it…
SafeDrive & MagSafe Mount V2 for BMW i3 Compatible with the latest version of Safedrive and older MagSafe pucks (non-braided cable versions). Fit for iPhone 15
SafeDrive Mount for BMW i3 Compatible with the latest version of Safedrive
I designed a Screwdriver Holder for my wallmounting system. It fits diffrent sizes of Wera Screwdrivers. I uploaded the fusion files too so that you can redesign it for your kind of screwdriver you have. I designed it for that system:…
I lost the crank handle for my silent cocking device for my Carbon Express Piledriver crossbow, so I designed and printed this which worked great.
Just print it in your favorite color. Material does not matter so use whatever you have available. I just use some blue PLA from Redline. 2 Perimeters are enough.
I wanted to store the set in a drawer, so the existing gridfinity solutions didn't work. Since the tray fits 16 screwdrivers but the set only includes 15 screwdrivers I filled the additional slot with a dummy with Proxxon label.
My single complaint about the Scribedriver is that they are too thin for my hands, making them uncomfortable to write with. To solve this, I 3D printed pen grips out of TPU for the Scribedriver. The TPU material still comes out harder…
Made a Safedrive holder for Bmw x5. it fits the small compartment in front of the cupholders. It prints on the back with supports. should use painted supports for the inside, the cap on the side is to both get the support out, and to feed…
This is a Holder for eight Screwdrivers and two Pliers. The Screwdrivers are from Wiha, the Part No. 42991 and one 01352. The two Pliers are from Knipex these are, in my scenario 3522115 and 3512115, there also Fit some others from Knipex.
Install the rails on the wall, put the holders on the rail in the desired arrangement and slightly tighten the bottom screw. Anytime you can loose the screw and adjust/rearrange/add/remove single holder. Includes also some yellow chisel…
Info: This is box for wera screwdriver from Aliexpress. Screwdriver came only within plastick bag so I made this box to hold it. Box have some holes for handle to protrude so box itself doesnt have to be so big. Box can carry handle of…
This prints as a single piece and then folds shut with a nice snap lock mech. Don't try to print this as separate pieces as you will never be able to put them back together again as the hinge has tight tolerances and is designed to be…
I had an old USB 2.0 500Gb Hitachi portable hard drive that I no longer had a use for. The hard drive had been taken out (it's easier to use a SATA/USB desktop dock for my occasional needs) and it was just gathering dust. But since I…
___________________________________________________________________________________________ In the previous episode... Using the innards of my redundant Hitachi Simpledrive USB HDD, I previously created a TPU case to hold the PCB and the…
This is a good way to always have a screwdriver on the go. It can also hold 3 bits so that is another bonus. In order for this to work you will need a 6x2mm magnet that will hold the bit in. Due to varying printer tolerances, let me know…
Mount your safedrive unit safely and securely on the drivers display in your BMW i3. The unit is slightly angled towards the driver to improve visibility and avoid glare from the side window. The safedrive unit is held tight and the mount…
A really simple model of a bracket to attach the SafeDrive unit to the center console of a Tesla Model 3
A slim mount to allow you to attach and detach an external hard drive from the back of your laptop (of course you could use this mounting system for a lot of things, but this is what it was designed for.) Lock Dimensions: 50mm x 65 mm x…
A really simple mount to attach the SafeDrive unit to the top left corner of the center screen of a Tesla Model Y.
This model allows to make a hyperdrive solenoid automatic or select fire. Without any computers. Hardware, 1x lever switch 2x M4x20 screws 1x XT-30 conncector Installation guide can be found here: If you have issues make sure you have the…
Made these to hold my LTT screw driver in place on the honey comb storage wall. Uses the standard inserts for the HSW and should be a press fit. I am learning Fusion 360 on the side so if there is there anything you notice that could…
Print at your own Settings (No support needed) Adding 4 M3 Heat inserts and your are ready for better Airflow please Add The Meshfront bevor
Simple display stand for the LTT Scribedriver Bolt Action Pen Assemble with a tiny bit of super glue.
Simple remix of 2 models https://www.printables.com/model/561810 https://www.printables.com/model/993887
