3,644 models
***UPDATE*** I've had a couple of suggestions come in (thank you @Roman_1037762!) that I'd like to implement over the next couple of days. The first of which is a clockwise flow for folks south of the Equator. Or maybe you just have a…
Print approx. €11.13–€13.60 excl. taxPreliminary estimate for one variant
NOTE Check out the improved version of the model at https://www.printables.com/model/574794 ! I like to stress-test prints that I don't intend to “keep forever.” I used organic supports for the two smaller pieces and brim on the elbow.…
Print approx. €1.03–€1.26 excl. taxPreliminary estimate for one variant
Replica of the TIE/d Defender from Star Wars. It comes in two versions. The canon version is based on its depiction in Rebels, the other version is based on its (most common) depiction in Legends. The only difference between the canon and…
Print approx. €1.44–€1.76 excl. taxPreliminary estimate for one variant
Poro from the game League of Legends - Aram I laso made an pad under the poro and a little cookie
Print approx. €0.09–€0.11 excl. taxPreliminary estimate for one variant
PYC3D.ES SOCIAL MEDIA MEMBERSHIPS PYC3D SHOP DONATE TRIFORCE LOGO THE LEGEND OF ZELDA KEYRING Embrace the power of Hyrule with the 'Triforce Logo The Legend of Zelda Keyring'. This elegant 3D model features the iconic Triforce symbol,…
Print approx. €0.38–€0.46 excl. taxPreliminary estimate for one variant
every 3 layers I changed the color: Ocean Blue, Gold, Black, Gold. Gold and Black (Overture filament) PETG Ocean Blue (Prusament) PETG Strong keychain i Put 100% infill for better strength
Print approx. €0.33–€0.40 excl. taxPreliminary estimate for one variant
25 Common Vegetable Stake Labels Size 135mm X 10mm X 1.2mm LAST layer prints the letters so use a different colour filament on that layer if you wish. The biggest challenge for these as they will be outdoors will be the heat of the sun.…
Print approx. €3.39–€4.14 excl. taxPreliminary estimate for one variant
H0 1:87 Model Train Service Port “Lokliege”. You get a single 245mm width or five connectable sizes (100mm, 150mm, 200mm, 225mm, 240mm) to build the width you prefer. It will fit at least all H0 1:87 model trains but maybe usable for…
Print approx. €3.38–€4.13 excl. taxPreliminary estimate for PETGSource material: PET
Description An Apex Legends Gas Grenade from Caustic. It has a lock system to lock the Grenade when its open. You can add magnets for an better feeling. I used 5x1 mm magnets. The magnets are Not necessary. You need 4 M3 Screws and nuts.…
Print approx. €15.49–€18.93 excl. taxPreliminary estimate for one variant
The source marked this model as adult content.
Print approx. €24.66–€30.13 excl. taxPreliminary estimate for one variant
In schwarz drucken sonst spinnt die Hinderniserkennung!! Einfach mit einem 10mm Klettband befestigen, alternativ Isolierband oder Kabelbinder etc. Den Schlitten mit Sekundenkleber in die Aussparungen kleben. Print in black else the…
Print approx. €0.78–€0.96 excl. taxPreliminary estimate for one variant
Bonjour Etiquettes de potager. Le texte dépasse un peu pour facilement changer de couleur en fin d’impression. Ces étiquettes sont fournies en format modifiable Fusion360. @ + Hello Vegetable garden labels. The text protrudes a bit to…
Print approx. €0.99–€1.20 excl. taxPreliminary estimate for PETGSource material: PET
Da ich nicht immer den Gartenschlauch auf die Kabelrolle aufwickeln wollte, habe ich eine Halterung für ein 100er Fallrohr erstellt. Alle Teile können in einem Durchgang gedruckt und anschließend zusammengesteckt (und gerne auch geklebt…
Print approx. €7.31–€8.94 excl. taxPreliminary estimate for one variant
PYC3D.ES SOCIAL MEDIA MEMBERSHIPS PYC3D SHOP DONATE LINK FIGHTING THE LEGEND OF ZELDA KEYRING Embark on a legendary quest with the 'Link Fighting The Legend of Zelda Keyring'. This 3D model captures Link in a heroic stance, ready to…
Print approx. €0.48–€0.58 excl. taxPreliminary estimate for one variant
If you're like me you plant a lot of seeds in your vegetable garden and forget what you planted where. I made these to help me remember. Included is a gcode for a Elegoo Neptune 4 using PETG. In order to get the correct colours you have…
Print approx. €0.65–€0.80 excl. taxPreliminary estimate for PETGSource material: PET
Replacment for Electrical Box Clip A6395450073. In case one of yours broke or went missing. Print in PETG or ABS to ensure temperature resistance.
Print approx. €0.58–€0.70 excl. taxPreliminary estimate for PETGSource material: PET
Most of modern beekeeping happens in modular hives. This is a model of one such hive, specifically the “Segeberger Beute” often found in Northern Germany. The model is in scale 1:12.5. I personally don't have such a hive (use wood hives…
Print approx. €1.70–€2.08 excl. taxPreliminary estimate for PETGSource material: PET
Die Bauteile dienen als Halter bzw. das Gegenstück, um die Falle eines Schlosses bei einer leichten Türe aufzunehmen. Bei unserem Wohnmobil ist der Halter ein wenig zu kurz (10 mm) geraten, so dass die Türe nicht schließt. Ich habe hier 4…
Print approx. €0.78–€0.96 excl. taxPreliminary estimate for one variant
Der Wasserhahn meiner Regentonne scheint mir etwas unterdimensioniert und ich habe schon eine Weile Angst ihn abzubrechen. Daher habe ich ihn nur verstärkt. Damit ist ein Bruch hoffentlich abgewendet - und der Hahn liegt nun besser in der…
Print approx. €0.70–€0.86 excl. taxPreliminary estimate for PETGSource material: PET
Die modellierten Bauteile dienen als Ersatz der Spiegeldichtungen, wenn man Spiegel an den Lenkrädern Montiert hat und die Standartmäsigen Spiegel abmontiert. Der Ersatz wurde an einer Yamaha YZF-R 125 Baujahr 2023 montiert und sieht sehr…
Print approx. €1.66–€2.03 excl. taxPreliminary estimate for one variant
Print with supports, PETG material for greater strength, 0.2mm layer height. No complaints for two years. The blue one in the picture is my holder, which is similar.
Print approx. €2.96–€3.62 excl. taxPreliminary estimate for PETGSource material: PET
It has to parts. An adapter for your Somfy remote control wich fits perfectly into a Busch Jaeger power outlet/light switch and a lid to cover it. You assamble it this way: 1: You put the adapter into the Busch Jaeger part, from behind.…
Print approx. €0.28–€0.35 excl. taxPreliminary estimate for one variant
Bonjour Etiquettes de potager. Le texte dépasse un peu pour facilement changer de couleur en fin d’impression. Ces étiquettes sont fournies en format modifiable Fusion360. @ + Hello Vegetable garden labels. The text protrudes a bit to…
Print approx. €0.99–€1.20 excl. taxPreliminary estimate for PETGSource material: PET
These food identification sticks are designed to help guests with allergies or dietary restrictions easily identify dishes at gatherings. Simply insert the sticks into the plates to clearly label the food. This eliminates the need for…
Print approx. €0.47–€0.58 excl. taxPreliminary estimate for one variant
6 corner connectors for a box rain gutter Description : We have built a 6 corner garden house with a box rain gutter. But the corner connectors are only available as an optional accessory for a price I did not want to accept. So DIY…
Print approx. €2.52–€3.08 excl. taxPreliminary estimate for PETGSource material: PET
Este modelo sirve para decorar un acuario, su atractivo diseño le da un aspecto muy natural dentro del entorno.
Print approx. €1.33–€1.62 excl. taxPreliminary estimate for one variant
Smaller than the original with more cuts for string/rope securing and two holes. I'm using this in a greenhouse for attaching cucumbers, tomatoes etc to maintain vertical grow with jute string, ideal for infinite grow by unwinding the…
Print approx. €0.48–€0.59 excl. taxPreliminary estimate for PETGSource material: PET
very importand to print the treads in detail or else they wil not work. i printed it with variable layer height
Print approx. €0.89–€1.08 excl. taxPreliminary estimate for one variant
A simple brush holder for a othen seen brush sold in A..Z
Print approx. €1.14–€1.39 excl. taxPreliminary estimate for one variant
Um einen PSU-lock zu bewegen habe ich mit OpenSCAD ein Tool gebastelt, dass den PSU-lock aufnehmen kann und einen Knopf dazugestellt, damit die Finger nicht abrutschen. <…
Print approx. €0.32–€0.39 excl. taxPreliminary estimate for PETGSource material: PET
The design is based on a yarn "live laugh love" sign but with the words of Gricko from the DnD group, Legends of Avantris
Print approx. €3.76–€4.60 excl. taxPreliminary estimate for one variant
Diese robuste Klappenlösung wurde für ein standardmäßiges Kellergitter entwickelt (z. B. vor Lüftungsschächten), um bei Bedarf einen Schlauch oder Kabel nach außen zu führen – und den Durchgang bei Nichtbenutzung effektiv gegen Tiere zu…
Print approx. €1.47–€1.79 excl. taxPreliminary estimate for PETGSource material: PET
Bei den neueren Workmates werden sogar die Kunststoffteile eingespart: Der scharfkante Hebel zum Ver/entriegeln hatte früher eine Schutzkappe - Hier meine Version zum Nachrüsten. In gelb die Version für Stanley, orange für Black&Decker.…
Print approx. €0.43–€0.53 excl. taxPreliminary estimate for one variant
For a good result, print the ground plate with 0,15mm layerhight.
Print approx. €3.94–€4.82 excl. taxPreliminary estimate for PETGSource material: PET
This model replaces the switch rocker of the BuschJaeger Balance SI series and allows the use of a Hue Button instead. A small magnet (ø = 15 mm, height = 1,6 mm) is inserted on the back so that the Hue Button holds magnetically. Due to…
Print approx. €1.05–€1.28 excl. taxPreliminary estimate for one variant
Needed a cookie cutter for graduation party. Have to do the school mascot of course!
Print approx. €1.41–€1.73 excl. taxPreliminary estimate for one variant
Cake topper to celebrate someone attending or graduating from Dickinson College (Carlisle, PA, USA). Printed in PLA on a MK3 + MMU.
Print approx. €1.39–€1.70 excl. taxPreliminary estimate for one variant
Wenn die Regenrinne außermittig ist und nicht in das originale Loch passt.
Print approx. €3.35–€4.10 excl. taxPreliminary estimate for one variant
Dies ist eine Halterung für eine Gemüseschaufel, die nun beim Kochen immer griffbereit ist. Die Halterung ist mittels zweier Powerstrips Large (Haltekraft 2 kg) befestigt. Die Aussparungen ermöglichen das einfache Entfernen der…
Print approx. €2.00–€2.44 excl. taxPreliminary estimate for PETGSource material: PET
Tactile image of asexual reproduction by vegetive propagation. Context Sciences, technology, engineering, and mathematics rely on illustrations and graphs to convey their knowledge. However, blind people are limited to texts (if literate…
Print approx. €0.10–€0.12 excl. taxPreliminary estimate for one variant
This spacer helps you to keep a distance between 8 mm and 15 mm while flooring. It does not allow distances lower or greater. It only works in combination. Note that the numbers on the spacers indicate the thickness if you combine both…
Print approx. €8.21–€10.03 excl. taxPreliminary estimate for one variant
100x160mm sign, to advise visitors about the negative entropic effects thy may experience in your shop. Mesh and Solid (may print easier) models provided. Best with color switch above 1mm, as with included gcode. Pictured in S hadowbox…
Print approx. €1.49–€1.82 excl. taxPreliminary estimate for one variant
Ein variabel zu befestigender Griff, um lange Tage mit der Legeflinte angenehmer zu machen! Sehr stabil entworfen, es werden zum verbinden von Griff und Schale noch vier M6 x 35mm Sechskant Schrauben benötigt. Zum drucken die Schale auf…
Print approx. €2.35–€2.87 excl. taxPreliminary estimate for PETGSource material: PET
Der Standardanschluss für Schläuche des GFP Glashauses hatte ein paar Nachteile: der Schlauch hält auch mit Panzertape nicht wirklich. Wasser, das bei den Glasscheiben in das untere Querprofil fließt, landete im Trageprofil und nicht in…
Print approx. €9.24–€11.30 excl. taxPreliminary estimate for PETGSource material: PET
This design is my attempt at creating the ultimate 3D Printable BOTW Master Sword. This Master Sword was meticulously designed in Fusion 360 so that all parts can be printed without support material, and the final piece can be assembled…
Modeled from scratch, inspired by lwx007's design: Thingiverse #5685812 I saw some comments about difficulties with the original model requiring assembly or gluing, and decided to make a model that can be printed in a single piece and…
It's been exactly 5 months since I published my first 3D print design. Back in August, I uploaded my design for a fully 3D printed Master Sword from The Legend of Zelda: Breath of the Wild. I had been working on that design on and off for…
Vegeta bust for Dragon Ball fans
Notes: Printed with supports: Drone Body 1 Printed without supports: (everything else) Always print: Drone Body 1 Drone Body 2 Drone Shaft 1 Drone Shaft 2 Drone Tail For Regular wheels print: Wheel 1 Wheel 2 For TPU/Dual colour wheels…
How I printed it: 0.12 Layerheight (The Model is really detailed) 40% Cubic Infill Make overhangs printable in CURA No Supports needed (If you really want supports , then id recommend to support the Chin and to use Tree-Supports) Printed…
If you like my work and want to support me bringing you new content please consider supporting me on Patreon https://www.patreon.com/FotisMint Pre-Supported .stl and .lys files for resin included by Charro Zuck support services. Comes in…
Category: Toys & Games
Unleash medieval mayhem on the battlefield with this 28mm trebuchet sample. Test it before you trebuchet it! This is the Free Sample version of my functional 28mm trebuchet — a simplified, working model designed to let you try before you…
Boundary wire install tool robot mower - Verlegehilfe Begrenzungsdraht Mähroboter If you like it --> press like it :-) Tool to install the boundary wire for your lawnmower into a groove. Groove can be done with the tool in my other models…
Wandhalterung für den Bosch 4A e-Bike Charger (Smart System ab Modelljahr 2022 BPC3400), Befestigung mittels 2 Senkkopfschrauben ø 4mm.
From the depths of meme brainrot, the legendary sahur drummer is finally printable! Tung Tung Tung Sahur brings chaos, tradition, and pure internet energy into one glorious, unhinged figure. Whether you know him from the streets or the…
K/DA exploded into the music scene with their hit song “POP/STARS.” Fans of K/DA can’t get enough of their unconventional flair, from the trademark tails (which fans suspect are real) to otherworldly decor in their studio. “Our songs are…
Link, Purah, and two Zeldas. They’re definitely going to need supports, and I also recommend scaling them up nice and big before slicing, assuming you want the fine details. Have fun with these, and if you want to see more, give a like…
Akali makes appearances next to other street performers in cities she is visiting. Combining mixed martial arts and the beat of her own rap lyrics, she delights audiences with her bold lyrical rap and punk ninja style. She started…
Prologue: In the 10 or so months since I posted my Master Sword design, I've had countless requests for some sort of wall mount or display stand design. There's even been several designers that have published their own displays for the…
https://www.myminifactory.com/users/terrain4print?show=store Access to all new models for $2 per month I have a subscription service on MyMiniFactory, a tribe. I make miniature wargaming and roleplaying game terrain for your home 3D…
Preview of completed ball: https://imgur.com/gallery/P5iGYgX ~Important update 2022-01-29~ The bottom hinge for the split version was erroneous, uploaded a new version, name ending with “(fixed)”. Also added optional stuff, a ‘Heavy Ball’…
This is a model of Link from The Legend of Zelda: Ocarina of Time. You will have to scale, rotate, support and slice the model per your preference. I uploaded this model originally as a very inexperienced modeler, and the model had errors…
Popandsicle’s Master Sword is totally genius. The sword prints without supports, doesn’t require glue, and looks amazing. Plus, it’s free! However, the original model is designed so that all pieces fit on a Prusa Mini. This is really cool…
A remix of these amazing models found here: http://www.thingiverse.com/thing:463063 To print, lay them on their backs, have supports on, use a brim, and have the "Combine all" option selected in Cura. Want to access even more models not…
I liked the design and idea, but I definitely don't like supports and multi-part designs unless necessary.
Shower Squeegee Holder, Diameter 26mm, Width 26mm Material: PETG Walls: 4 perimeters Infill: 15% I welcome all feedback! I'm eager to see your finished models. Happy printing!
The RE-45 is a staple of the Frontier war, initial appearing in the hands of IMC soldiers as a effective suppressent for local dissent and providing cover fire for advances. Eventually it made it into the hands of Militia forces and again…
Build Videos P1: https://www.youtube.com/watch?v=nPZfvoYlkRc P2: https://www.youtube.com/watch?v=hSb7K_NrlCI Hey everyone! This is my model of the Wingman from Apex Legends, it's pretty accurate, I've made a few videos on how I designed…
⛪ The Temple of Time ⏳ We have updated & improved this original model to have better detail & to make it easier to print. Watch how it was done on YouTube ! The original base model was created for MMU by MiniWorld3D collaborator artist…
Wall-mounted Hylian Wingcrest from the Legend of Zelda series. This was modeled by me based on a 2D image of the crest. The model includes a slot on the back so that it can be hung on a wall by a single nail.
This is a model of the Hylian Shield from The Legend of Zelda: Breath of the Wild made specifically for multi-extruder printers. Please be aware that the colourized version of this model was not designed to be printed in pieces on a…
ENG: Add some juice and get rid of those nasty bugs. You dont need to add much... the funnel is very deep.
The mallet winding machine was developed and built for me by Mr. Fabian Buschulte as part of a student project at Reutlingen University. Apart from a few roller bearings, thread inserts and screws, as well as the purchased counter, it…
Accurately bending leads on radial, through-hole components like capacitors and resistors has never been this fun! :D Inspired by the fancy tools used by the talented Marco Reps in his GPS Nixie Clock video , I modeled a Biegelehre from…
This is the Signal Disruptor / Mute Jammer from Rainbow Six Siege. The model is Printed seperately and assembled after printing. Since Thingiverse only supports single file downloads due to increasing incompetence, I had to include…
Hylian shield keychain from the Legend of Zelda! This one involves multiple filament color changes so I have added a gcode file or you can reference the photo.
Miss Fortune League of Legends STL for 3d printing by CG Pyro collectibles fanarts customs figures Sarah Fortune, captain of Aguasturbias famous for her looks but feared for her brutality, is a stern figure among the port city's hardened…
Includes: Link (Not the archery pose, don’t have that one. Sorry!) Default Link (Unequipped) Zelda Ceremonial Zelda Mipha Daruk Revali Urbosa Sidon Yunobo Teba Riju Paya Purah Kass All with or without a platform! They’re definitely going…
If you download the model, please don't forget to leave a like. Thank you! <3 Experience the might and pride of Vegeta with this low poly geometric 3D print. The design encapsulates the formidable Saiyan warrior in crisp, angular lines,…
Eren Jaeger in Titan Form. mix of the 3 best versions I have found. Head/Midsection/legs.
Ripped from Volibear's model. He juggles 'em :) EDIT: JPfeil made a remix with the internal geometry fixed and a better looking exterior, go check it out. Print Settings Printer Brand: Creality Printer: Ender 3 Rafts: No Supports: Yes…
Description This upload contains several CAD models of electrical switch components compatible with Busch-Jaeger Reflex SI . All parts were independently modeled based on real measurements of existing components. They are not original…
Link Statue - Trophy: Legend of Zelda USE Linkandshield files. They are fixed. Keeping old ones up just in case
An inexpensive clip for cage/string training tomato plants or other garden plants. Designed to be printed in PETG or other outdoor-friendly filaments, the 100% size is ~25mm in diameter once printed and clipped closed, and can hold tight…
Diese kleine Falle im Apfeldesing lockt die kleinen Fruchtfliegen an und sammelt sie im inneren. Durch den Trichter wird ihnen der Rückflug erschwert. Im Inneren könnt ihr zb. in einem abgebrannten Teelicht Obst oder eine Mischung aus…
This remix is a mashup of @Popandsicle's excellent BOTW Master Sword Hilt and @xenonjibei's TOTK Corrupted Blade! All credit for the designs goes to each of them. If you have already printed @Popandsicle's Master Sword then you should be…
The Legend of Zelda: Majora's Mask The widest section of the inner dimensions of the hollowed out side of the mask is slightly larger than the average mans face. If you have a large head you may need to enlarge it which would require you…
Subscribe to find out more support free 4K Time-lapse video: Subscribe Now! http://www.youtube.com/iczfirz https://youtu.be/qtqErycp1b8 Addiction to 3D Printing? Watch these time-lapse! https://youtu.be/-ZsXFX6hjXk…
A hidden character from Apex Legends, now 3D printable. You might need to scale it up a bit.
This is our version of the Raven's Bite Heirloom from Apex Legends. The file was designed to print on our Prusa Mini, which has a 7"x7"x7" build volume. This is the whole version of the model. If you wish to print the cut-up version as…
Please download the original author's model here: https://www.printables.com/model/321247-hyrule-triforce-wingcrest-legend-of-zelda , which I had honestly forgotten that I had not made. My deepest apologies to the original author, Ian.…
Ich habe hier einen Regenschirmhalter für VAG modele Konstruiert Dieser wird ganz einfach am Top Tether eingeklippst Gedruckt habe ich das ganze aus ASA mit 3 Wandlinien und 15% Füllung
If you like my work and want to support me bringing you new content please consider supporting me on Patreon https://www.patreon.com/FotisMint Pre-Supported .stl and .lys files for resin included by Charro Zuck support services.
This collection of miniature figures, mostly around 32 mm scale (though Barthal may be a bit big for his kind), represents the standard pregenerated characters included in the BF1 Morgansfort multimodule for the Basic Fantasy RPG. It…
This keycap was modeled from scratch using one of the keycaps from my MX Cherry Red based board. I converted the Rainbow 6 Siege Logo to an SVG, and using a series of extrusions, splits, and cuts, ended up with a custom key where the R6…
Ah, Gen 9 is here! With Scarlet and Violet come two new legendaries (so far...) which are just awesome! Here is Koraidon
Model of Pathfinder from Apex, ripped from game files. Lyche Slicer warned me about holes in the model and my print ended up without an arm so your mileage may vary.
![Wingman | Apex Legends [Easy Print] w/ Stand](https://media.printables.com/media/prints/1665/images/10571_fce427a2-90e3-4947-9ee5-8dde5f2aa2ec/img_0178.jpeg)
