68 models
Usage: Collectible decoration Humorous gift or parody piece Custom addition to a Funko Pop–style collection Print Recommendations: Suggested scale: ~1:18 (around 10 cm tall) Print with supports (especially for the head and arms)…
7-Eleven is a popular convenience store chain that has been around for decades serving up snacks, coffee, Slurpee's, and Big Gulps. There are stores all over the globe, each with their own unique offerings. Most of the US locations stock…
💖 Support Me If you like this model and want to use it for commercial purposes, you can support me on Patreon and get a commercial license: https://www.patreon.com/cw/MonsieurPierre A stylized 3D figurine inspired by Eleven from Stranger…
Table tennis adapter for Quest 3 To assemble the adapter, you will need: 2 M4 screws, length 15 to 22 mm 2 heat set inserts for M4 screws (mine are 8 mm long) Glue to fix the racket and the two handle halves together. You can align the…
Blue is an option with a slight upwards orientation which might benefit forehand strokes. Purple is an updated model labeled V2 which has an orientation inbetween solidslime V2 and Wasyl adapter.
A highly detailed 3D statue inspired by Eleven (Jane Hopper) from the TV series Stranger Things . The scene captures her iconic moment of intense concentration, channeling her telekinetic powers as energy rises around her. The pose,…
Design in OpenSCAD to be printed all at once on a Replicator and snapped together. Just print and put together - no need for glue! Print instructions Category: Props Instructions Print Peel off platform and the thin first layer Insert one…
I'm working on a Japanese Diorama for Hot Wheels in 1:64 scale. Its flat on top to make it simpler to print and I don't know a easy way to divide a building for parts then to reconstruct it afterwards . If you know please remix. I have…
I was poking around Thingiverse looking for something that would be suitable for a Halloween costume and noticed that while there was a great 10th Doctor Sonic Screwdriver no one had uploaded one for the Eleventh Doctor! So here it is,…
Advantages over the previous one: - lighter (46 g with screws, depending on print settings...) - lower center of gravity (less head weight) - the position of the controller's top plane is respected in relation to the hand-held position,…
Commercial use is NOT allowed for this model
This is made completely from scratch by looking at the pictures. I'm a complete beginner at CAD modeling and made many prints before I was satisfied with it. For me it works quite well but one can always create new profiles for this…
Rails for mounting a 3.5 hard drive in an Antec Eleven Hundred (1100) case.
This is a remix Of the “Tool box parametric'' by ‘’yanev'' made for the ObdEleven Nextgen scantool. With inserts for the scantool, with a nice logo on the lid. I printed the inserts in TPU 95a, but all materials work.
Commercial use is NOT allowed for this model
Left handed version of joshuacant's Quest 3 paddle adapter
Stranger Things Series - Eleven in Jean Jacket
Eleven owls for teachers and librarians - wall arts 20 cm, coasters 10 cm, toppers (two colours), seven bookmarks (three colours) No need for multicolour system like MMU3.
I made this for a basic 1:64 diorama. A blank sign, seperate sign inluded Please adjust size to your needs. Let me know if you have any feedback or suggestions
A new 3D figurine generated by AI, a Chibi Eleven. I print my models on a slightly ageing printer. I try to find the best quality/time ratio for my prints. I print these models in fairly small formats, and the quality of the camera…
Stranger Thins Series - Eleven at the Beginning
⚙ RECOMMENDED 3D PRINT SETTINGS Material: PLA or PLA+ recommended Layer Height: 0.16 mm for finer detail; 0.20 mm for faster prints Infill: 10–15% recommended for most models Wall Loops: 2–3 Supports: Enable where necessary based on model…
Inspired by the Kinder Joy Funko Pop Stranger Things surprise figures collection. Generated with Bambu Lab AI (image to 3D) and manually painted in the slicer for maximum color accuracy, up to 5 colors with the Bambu Lab H2C + Vortek…
Simple slide-on cap for OBDeleven next gen. The model comes in three tolerances. I use 015 and it should fit. I recommend printing from PETG If anyone has a problem, they can use 02 with a larger tolerance or 01 with a smaller tolerance.
Man benötigt noch 6x M3*30 Schrauben. Das Feld neben dem Dongle ist für eine Beschriftung vorgesehen. (Benutzername, Passwort etc.) Alternativ kann auch Schaumstoff für den oberen Inlay verwenden. Der druck ist leider nicht perfekt…
Antec Elevenhundred HDD and SSD rails. SSD rails untested since there's nowhere to use them with :) (yet). Meaning the SSD rails are just a miniature versions.
Eleven – Stranger Things https://www.hi3d.ai/share/7ac994b78280452792928b3694f4c6a3?inviteCode=Y8Axoeva9P&shareType=history_model
Llavero inspirado en Eleven de la serie Stranger Things
I made this for a basic 1:64 diorama. i was inspired a rural 7 Eleven Store in Japan. Please adjust size to your needs. Let me know if you have any feedback or suggestions
Fun sign with Pippin's legendary list of meals! Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm The Model is 134.82x200mm in size You may print at higher layer heights below the Min Depth of 0.48mm The Max…
I made this for a basic 1:64 diorama. likely need some support on the opening Please adjust size to your needs. Let me know if you have any feedback or suggestions
Hole diameter is 5.1mm to account for over-extrusion. Use a lighter to soften if very tight.
⚙ RECOMMENDED 3D PRINT SETTINGS Material: PLA or PLA+ recommended Layer Height: 0.16 mm for finer detail; 0.20 mm for faster prints Infill: 10–15% recommended for most models Wall Loops: 2–3 Supports: Enable where necessary based on model…
A model depicting one of the main characters from the "Inazuma Eleven" series.
Eleven - Stranger things - Can Holder Fits long EU cans with a capacity of 0.5L . You can also use my insert for 12oz or 330ml (slim) cans (link below) Recommended print settings: PLA, 0.2mm layers, 2walls, 8%gyroid, brim, Automatic (28°)…
Fit 11 Tiles in the Box (without protrusion) - one of the simplest and most difficult puzzles.
Eleven llega desde el Laboratorio de Hawkins en versión chibi tipo Funko Pop, lista para proteger tu estantería del Upside Down. 🧠✨ Este modelo de Stranger Things, con su bata blanca y mirada intensa, es perfecto para imprimir, pintar y…
I used to sell these on Etsy in almost every PETG color Prusa offered but it just became too much work and not enough profit. I was selling them for $30 USD for a set of 12 rings and a clip. The material cost and print time weren't the…
I love TheNewHobbyist's sonic, but the 11th Doctor's Sonic Screwdriver has a section of its handle that has a hexagon-shaped cross section. I whipped up this alternate handle section and should replace his "11th_Doctor_Sonic_B.stl". Print…
As I sometimes troubles to remember how often a keeper has already saved or permanently looking for a strength of a player I created these tokens. Should be suitable for any printer with 0.2mm layer height. The ones on the photo I printed…
Second revision on my fan showdown submission upon review of previous fan showdown submissions. Same goals as #1 submission Ninewing, plus: Removed the other ring. Only seems to be needed if the fan blades are very thin. My chonk wings…
LED tealight holder in the shape of the Eleven from Stranger Things Fits standard size (37 mm diameter) tealights , but you can customize the size as you wish. Tree supports are a bit tricky. I recommend leaving it set automatically to…
Up to eleven! This extruder visualizer is a remix of the great knob by evanphi . I redesigned it to press fit on 5mm round motor shafts. The knob now also includes a top layer with an indicator lined up with the number 11. You can even…
Hand made model of One Eleven Congress (aka the Franklin Federal Building)
filament PLA hotend-220 print bed- 60 OTHER LAYERS-50 printer MK4S vertical walls-perimeters-2
Print at 0.2mm layer height. Insert a color change after 2 layers. This 3MF is designed for a MK4S and MMU3, and will print in 50 minutes on one.
Seven Eleven sign Wall Decoration. I have uploaded 2 designs, one for those that have a multi-color system (AMS, CFS, MMU) and another with which multi-color is not necessary, the color is changed by layer number. Ready to print. If you…
Pixel art keychain of Eleven or El from stranger things the keychain can print in 1 piece or it can print in multiple pieces to make painting easier
The model is too small, it needs to be scaled up in the slicer. Have a good print.
A Stranger Things insert for the speaker lighting on a Stern Pinball machine. Transparent filament to be used to suit Stern Lighting System. Any material or layer height should be fine.
💖 Support Me If you like this model and want to use it for commercial purposes, you can support me on Patreon and get a commercial license: https://www.patreon.com/cw/MonsieurPierre Detailed 3D model of Shindou Takuto, the talented…
Step into the Upside Down with this incredibly detailed 3D printable STL model that captures every iconic detail of your favorite psychokinetic hero. This stunning figurine showcases the character in their signature outfit with precise…
Step into the Upside Down with this incredible 3D printable STL figurine that captures every detail of your favorite psychokinetic hero! This meticulously designed statue showcases the iconic denim jacket and determined stance, making it…
Design Concept This ornament is inspired by the iconic character Eleven from the popular series Stranger Things. Its minimalist design captures the essence of her character with a festive twist, perfect for adding a pop culture element to…
Bring the supernatural world to your desk with this incredibly detailed 3D printable figurine that captures every nuance of the beloved psychokinetic character. This meticulously crafted STL model showcases the iconic casual outfit and…
ı do eleven stranger things
There are two parts: The feet itself is printed in TPU with low infill (5-10% gyroid) and low wall count (2-3) to give it some squish. The peg, which snaps into the case should be printed with PETG or another tough, low creep material.…
A gridfinity bin for OBD Eleven and other J 1962 connector scanners
Hueforges can be resized, only change the X and Y scale, leave the Z height the same. Stranger Things Eleven Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm The Model is 133.4x200mm in size You may print at…
7-Eleven has rules to BYOC; ahem "On Bring Your Own Cup Day, the rules are simple: cups must be clean, watertight, leak-proof and able to stand upright inside the 10-inch cutout in the in-store display, showing it fits under the Slurpee…
You will need 11 pieces of 11mm bearing balls for this. Just snap the balls in after printing, nothing special. If you want a more snappy feel, bend the lobes in a little by carefully pessing the Eleven to a hard surface.
Detailed 3D printable Eleven Eggos figurine, ready to print on FDM in PLA. Usage & Links Personal use: print freely. Commercial/digital redistribution is only allowed with a valid Patreon license: https://www.patreon.com/Marjers Portfolio…
7-Eleven is a popular convenience store chain that has been around for decades serving up snacks, coffee, Slurpee's, and Big Gulps. There are stores all over the globe, each with their own unique offerings. Most of the US locations stock…
LED tealight holder in the shape of the Eleven from Stranger Things Fits standard size (37 mm diameter) tealights , but you can customize the size as you wish. Tree supports are a bit tricky. I recommend leaving it set automatically to…
Eleven - Stranger things - Can Holder Fits long EU cans with a capacity of 0.5L . You can also use my insert for 12oz or 330ml (slim) cans (link below) Recommended print settings: PLA, 0.2mm layers, 2walls, 8%gyroid, brim, Automatic (28°)…
