8,027 models
The siphons are printed separately and then simply pushed into place. I did it this way to avoid using supports. Water level indicator The floating water level indicator is a bit tricky. Print the indicator (1 perimeter, no infill),…
This fully functional Cryptex has an easily changeable code and is modeled after the Cryptex described in the novel 'The Da Vinci Code' by Dan Brown. (Thank you Prusa team for this wonderful video of the Cryptex) Design I made this…
This Combination of Several Test Print Patterns Will Save a lot of Time Tuning your Printer. You can choose between two variants: 1.) A slightly remixed version of the original model (e.g. now including a squasing test) I made for more…
🇬🇧 English 🇬🇧 (In 🇫🇷 Français 🇫🇷 at the bottom of the page ) Ideal for your 3D designs, find 3D models of ISO M3 screws L4-L5-L6-L8-L10-L12-L14-L16-L18-L20-L25-L30-L35-L40 in .step files. and their washer and nut. Advice for 3D conception…
Customized version of https://www.thingiverse.com/thing:2404850 , with added labels on top, to show the grit of sandpaper used. They go from 80 to 3000. If your sandpaper is a different grit, there's a blank top template provided. With…
scale it up, make it flat, integrate, do what you want ;) I print with 1 layer raft to compensate for fine lines. Had some trouble on a first print without it, they tend to curl up for there is too little adhesion for a single line. for…
Drink organizer. New model 2024 https://www.printables.com/es/model/781648-2024-stackable-rotary-drink-dispenser New model 2023 https://www.printables.com/es/model/377642-2023-stackable-rotary-drink-dispenser And modular model :…
Edit: added an STL model/3mf file for printing an airless basketball out of Yasin PEBA filament on 5/2/2025. These models/files are for making airless basketballs out of either the PEBA filament or the Ataraxia Art Flexible PLA (FPLA)…
3D Printed Diffusion Panels Before printing watch The Next Layer video, Jonathan's setup is amazing and it explains what you can expect way better than I could in this description. At 8.25" (209mm) this is the largest printable diffusion…
These are four to scale models of the new iPhone 12 (12 Mini, 12 Pro, 12, 12 Pro Max). They are perfect if you want to check which size fits into your pocket. Print instructions I have printed the models upside down and standing with a…
Nearly 50% Reduced Time and Plastic Plus Separate Models for Individual Tests All-In-One From 6h57m to 4h8m 44g of material to 23g of material Separate Model Print Times Diameter Test - 32m 25mm String Test - 28m XYZ Dimension Test - 39m…
Many different sized funnels. With the top diameter starting at 25mm and going up to 200mm. Each with multiple appropriately sized bottom/nozzle sizes. The models are grouped by the top diameter size. If any of these don't suit you you…
Update 2023-09-17 Quad stl and Fusion 360 file updated with correct ‘Quad’ dimesions. Thanks to Evolver for catching this. Update 2023-08-31 New models (R2) have replaced the original models. The new models install easier in the Skadis…
BEFORE YOU LEAVE A BAD REVIEW: A few recommendations- Don't use textured sheet. PEI or supertack is much better. Start off with a smaller piece and be sure to go extra slow first layer! Using a binder like hairspray can help. If pieces…
Thread Design This standardised thread is called PCO28 and is produced in two versions. PCO28 1810 - the original standard (point of this article) PCO28 1881 - the newer material-saving version with a shorter thread. My problem was that…
It is able to be printed on a standard ender 3 bed. If you decide to remix it, even on other platforms, please give credit. From my experience, this model prints very well in PLA and Bambu Lab PETG HF but has some difficulties with the…
Original design: https://www.myminifactory.com/object/3d-print-anna-from-2013-frozen-23753 by Tanya Wiesner https://www.myminifactory.com/object/3d-print-elsa-from-2013-frozen-23754 by Tanya Wiesner…
Use-case This geared self-clamping and self-releasing hook is ideal to hold towels that have no hanger (or have an owner that is too lazy to use hangers). To hang up the towel, simply touch the lower lever slightly from the bottom and it…
My girls want to play with separate Elsa and Anna characters, that's why I printed separately. Now they just have to color it, and the fun will begin. Print Settings: Printer:Any Rafts:No Supports:No Filament brand:Any (my Aurapol)…
See also 1:64 stackable sea container (works well with HotWheels) My other printables for 1:64 display I've also created more models that you can be stacked horizontally as well as vertically. Below is a preview of the display shelf you…
Any suggestion is welcomed! Feel free to join my Facebook group to let me know what you want: https://www.facebook.com/groups/1115757609295068 Custom display base are also available from $5! Contact me to discuss what you want! If you…
It's a box for your 3D printer nozzles. Specifically, it's made for E3D v6 compatible nozzles, like those used in the Prusa printers. It fits 14 nozzles, 2 each of: 0.25, 0.3, 0.35. 0.4, 0.5, 0.6, and 0.8 mm. (These are the sizes that…
So I needed plant labels, and recently got into playing around with OpenSCAD. So this is my attempt to port the awesome design by @fortinmike to OpenSCAD. Whilst not exactly the same, it tries to provide a very similar look. You can see…
This is a remix of another remix I found. I made it so the full tower was cut into individual car components that easily and strongly connect with no adhesives needed. I split it into two separate versions, a base and a stacked version.…
Remix of a remix of the Hotwheels curve track piece with adjusted clip sizing. Changes were made to the legs to clean up geometry and artifacts. Sharp edges where smoothed where possible and slot openings where adjusted to fit the latest…
I took the iPhone 13 CAD models from Front Page Tech and 3D printed them! I converted the STEP files to STLs then printed them out on the Prusa Mini in Red Prusament. The original STEP files along with my exported STLs are included. My…
nozzles and cap for caulk, sealant, glue cartridges ( thread ∅15mm p=2.5 )
This is a Hot Wheels / Matchbox 1:64 scale model of a 4-post car lift for displaying different size diecast cars. This is a remix of EG3Dprinting's 1:24 scale for Hot Wheels 1:64 scale. These snap together so you don't have to worry about…
Updates 2023-12-01 - Added single corner and half grid bases for even more minimal printing. 2023-09-29 - Fixed the 2x2x7u & 8u bins. There was some gaping on the bottom of the label. 2023-06-09 - Fixed the 1x3x6u, 7u, and 8u bins. The…
Designed for Printables Flash Contest #101, this finger skateboard I designed features real rolling wheels to give you that tactile feeling. Tried my best to design it without need for supports, but the wheels that do not contact the…
You can create am Arduino obstacle avoiding robot or a sumo robot, remote control car or even a line follower. Add more sensors depending of what you want your robot to be. Otto is super easy to make, assemble and code. You have plenty…
Overview This is my second version of the Ring Lamp. First version is available here: https://www.printables.com/model/929809-ring-lamp In the beginning I wanted to change only a base and add some new Halloween panels in the Ring Lamp but…
Overview This is my Christmas set of panels for my Ring Lamp It work with Ring Lamp II available below - there are files for lamp and instruction https://www.printables.com/model/1043648-ring-lamp-ii-with-halloween-panels The panels work…
This model is a simple looping for connecting with Hot Wheels tracks.
I made this dock for my Apple Watch Series 4 with 44mm and it fits like a charm. I also tested it out with the 40mm version (3rd image) and it also fitted very good. It also fits all other Apple Watches (also Ultra), cause the format…
🐾 Abstract Minimal Animals – Forest Set (Low Poly) This set includes four minimalist low-poly animal figures designed in a clean, modern geometric style: Fox, Bear, Deer, and Wolf . The models are intentionally highly simplified ,…
This special Prusa Edition of the TerraPi SSD Case for the Raspberry Pi is to celebrate the 2 year anniversary of the release of the original TerraPi SSD case. The model prints without supports in under 2.5 hours. Best used materials are…
Folding Christmas decorations inspired by paper cutouts from school years. Used PLA and PLA+ filaments. Printed on Original Prusa MINI+ with standard PLA preset without any problems. Manual filament change required after the second layer…
***I made an updated version that should fix the slicing issues. I added the model here, but for the full page and description, check out the fixels 2. no supports required at all, much easier to print*** This is my current version of 3d…
Here is a fun Easter related model. The two pieces screw together to form an egg. There are two versions of the inner piece, one with a hole in the center to hide money and one without. The mode is similar to the popular “impossible”…
I designed Bluey in Blender. One of her sitting and one of her standing. Models require supports.
Build plate models and textures to customise the bed plate in your slicer. ❤ Enjoy this model? Your support means the world to me! If you love what I do, remember to like and rate the model. You can also follow me to get the latest…
Total 3 stl. All support free. You can choose anyone if you print on resin while "FDM" means less overhang. Don't forget to post your made and sub my YouTube. *** Timelapse also feat. with Mandalorian Airbrush to Life by Michael Siller.…
The brand new McLaren MP4/4, piloted by the famous Ayrton Senna, is very good except for one crucial detail: the ratio of front to rear tyres does not match reality at all and can distract a bit. Yet all you have to do is print the tyres…
I improved this model so you can print it without supports all over the place. You only need a line down the middle, as I show in the 3mf file, for the ones without holes, or a small amount around the connectors for the ones with holes.…
UPDATE 11/14/2023 added nemmie and henry and gave some sub text UPDATE 10/1/2022: added octoberfest mugs and did some sorting creator notes: I am still working on this and I get very busy with work irl so please be patient. I have since…
"Harry Potter" Cookie Cutter set 1 - 8 models / characters Cookie cutter is made of 2 parts - cutter and inner stamp. Parameters: Dolores Stamp - 50mm x 68mm x 4mm Cutter - 58mm x 76mm x 12mm Draco Stamp - 47mm x 69mm x 4mm Cutter - 56mm…
I don't have enough Hot Wheels track to make a cool stunt course, and the track packs are expensive, so I made my own track system. It is slightly wider than standard Hot Wheels track. The barriers are about the same height and more…
Decided to make my own version of the M18 battery adapter. This is a bit more involved than some of the others on here. Its two pieces which can be printed without supports. It uses 5 M3 flat head screws and nuts to hold together. The two…
Standard Hotwheels connector. This one is much more comfortable when comes to detach roads.
Think I'm Awesome? ~ https://buymeacoffee.com/triplegworkshop I used a random number generator to help pick the heights so I couldn't fall into any patterns. Sized to print on Mini+
Supports needed in the connector areas, everything else is self supporting. Nice small little ramp for inline jumps but is speed sensitive.
Disclaimer : I do not take any design credit (nor blame for the flaws) of the original model. I merely tried to repurpose and improve upon it for personal use. Optimized for Prusa Mini or similar sized bed: all the files are scaled and…
For the Simplified Version - I had to add cylinders to fill in the fragile suspension system shown below: If you are going to print it I would recommend the simple version.
I wanted a clean looking dual connecter which was hidden once the tracks were connected. Set of connectors which allow you to connect 1, 2, 3, 4, or 6 tracks in parallel. Dual connector works great for Hot wheels monster trucks. Supports…
The labels are for these gridfinity boxes: https://www.printables.com/model/592545-gridfinity-bin-with-printable-label-by-pred-parame The bolts are to scale as far as possible. When the screws get too long for the label, the bolt figure…
Diameter: 75 mm I recommend splitting it in half (37.5 mm). I tried printing it with these infills: 10% grid, 5% grid, 0%.
A display for hot wheels. The tolerances are tight so you have to heat it up a little to get the parts to fit together. Alternatively you could scale up the shelf and logo and glue it. I corrected the scale of the shelf. Sorry for the…
Later edit: For the US folks https://mandalaroseworks.com/products/sv08-clear-acrylic-panels if you use code CN3D at checkout you also receive a 5% discount! thanks to Mandala Rose Works you have to chose if you use a top hat or not to…
A Model Car Display designed for 1/64 diecast Hotwheels cars. It also works with other 1/64 car models like Matchbox. It works great and it's fast to print.
Insert hotwheels card into slot and position it so that the name of the car is visible. Hope you enjoy this model! :)
Found these on Grabcab by Ben: https://grabcad.com/library/festool-systainers-sys-t-loc-1 Wanted to share here. These are not my designs.
⚒ No 3D printer? No time to source components? I just opened my new e-shop where you can buy physical, ready-to-use versions of my models! Designed with passion, printed and assembled with care ⚙. 📦 Shipping across the EU: 👉 Get it at…
These Packout low-profile organizer labels are inspired buy Dan Winciker’s Milwaukee Low Profile Packout Bit Set Label thing on Thingiverse. I have re-modeled the labels in openSCAD so that you can customize the text on the label and…
Make it flexi! Design a print-in-place custom flexi 3D model from an image with the Web App or Python script! Download the ZIP file with the app executables and run the one for your operative system! (The executable file will open the Web…
These digital 3D printable models of Clay Wheels are meant to be used to create textures in clay and polymer clay, pottery clay, cake dough, fondant, fabric, and other materials. The download contains 18 OBJ files (reversed patterns…
These are 2-, 4-, 6-, and 8-stack versions of the HSW 211x248 wall panel. Print at 0.28 layer height with 5+ perimeters to avoid infill. There is a one-layer separation between each panel. Import the STEP file to your slicer, split the…
Still requires print supports on the part where the hot wheels track clips in.
Updates 2023-12-01 - Added single corner and half grid bases for even more minimal printing 2023-06-09 - Fixed the 1x3x6u, 7u, and 8u bins. The stabilizer “X” were done wrong. 2023-02-04 - Original post using the Gridfinity v5 spec Also…
Stylish plant labels for your garden, herb planters and more! Two slightly different models based on the same theme Hopefully tasteful (not too plain nor too kitsch ) Text on the front and back (I suggest putting the genus on the front…
Gave that away as a birthday present to 7-year old twins....therefore I needed a sturdier version that could take some abuse. I basically combined chemteacher628 awesome BattleFleet version with yanew's parametric toolbox design and added…
Bin for IKEA SKADIS. Hooks need support. Size: A box can be in standard shape , or equipped with a wave and/or separator and/or hexagonal bottom. The separator is not available if the hexagonal bottom is present. Folders: There are 564…
Can be used for DIY RC Airplanes, education and more. If you want other models of NACA airfoils, feel free to comment. Included models; NACA-0012 NACA-0015 NACA-1812 NACA-2212 NACA-2312 NACA-2408 NACA-2412 NACA-4412 NACA-5416 NACA-7712
für 25 Teebeutel leicht zu drucken minimalistisches Design Sichtfenster Teebeutel organiseren
This page is only a summary and may not have all the latest updates. The main publishing location for this model is on GitHub. Go to the GitHub page of this model for the latest updates, Blender source file, and more detailed…
My own Hot Wheels track piece, Something I felt was missing from what is sold. Works with most cars at medium speed, just don't overdo it. Connects to any Hot Wheels track with a connector, both my connectors and the Mattel ones work.…
A remix of hennysavenije's work, resized to 1:50, and put bases back on. Original collection has been removed from Thingiverse.com They do not claim credit for designing these models, and this is a remix of that. I've tested on a Prusa…
Just two small garden shovels. A larger and a smaller one. Large: 24 x 9 x 3.5 cm Small: 24 x 6 x 2.5 cm Support my work For non-Prusa parts and filaments, check out 3DJake ( International , UK , Germany , France ). I'll get a small cut…
Low profile chisel and plane iron honing guide. No bearings are required. Assembly Screw both jaws all the way to the center (they should align), then attach the knob. The right side is reverse threaded, and the jaws will only go one way.…
Other polymaker cardboard spool adapters out there have the following problems: 1. They fall off 2. They slip during AMS rewinding 3. They are so large that they require you to leave the AMS lid propped open so that they don't rub on the…
Horizontal stackable egg dispenser * *Added new model Extraramp with more inclination, more ramp, but same height, it is necessary to remove an area of the model once printed so that the eggs can pass through the floor below. Practical…
After print, I decided to this model needed some improvements, and i created version 2. You can print, upload and say your comments about printed thing. I'm waiting your response :) V2 includes this improvements: - Support line for the…
these are remixes of https://www.thingiverse.com/thing:2485063 and https://www.thingiverse.com/thing:2811554 There were a ton of problems with the original models and they weren't compatible with printers unless they were configured with…
Has a surprisingly large range of movement for high heels, spacing for toes are slightly increased to compensate for thicker shoe tips.
This is a recreation of the Hot Wheels retail packaging that the cars are sold in, minus the plastic blister that holds the actual car. I needed this for the display stand that I created to fit a 1:18 scale model, which can be found here:…
Update 28.11.2024: New better Beta Version with connector. Update 28.04.2024: As requested by a user, i added the first BETA version of the trackholder with connector. Due to the support, the surface is unfortunately not 100% beautiful,…
Use the pliers to separate the parts and then assemble the car. The model is on a scale of 1:64. To scale a model from 1:64 to 1:43, you need to use a scaling factor of 148.8% in the slicer Printing this model in multiple colors produces…
You can see a great example of this HEX Panels on Engineericly 's YouTube Channel. I printed mine with 100% size (you see it on the pictures), but next time I would rather use 120% or more, because it makes threading the LEDs easier and…
No necesita soportes pero se debe ubicar bien, si este modelo no cabe en tu impresora tambien esta el modelo compacto.
Remix of a hot wheels launcher that allows the launcher base to connect to standard hot wheels track. Requires two printed parts and a rubber band. Requires supports. I printed at 0.2 mm height and print came out nice.
3D Printed shelving system with snap together parts. https://youtu.be/xgLI_G_G63o https://youtu.be/Rua7R26Sotk https://youtu.be/c63ayOe9OTc Customization Basic Panels 1x1 (Use for test prints) 2x2 3x3 4x2 4x4 5x5 6x1 6x2 6x3 6x4 6x6 7x7…
This is my current solution for storing my 1/64 scale models. After some experimenting I came up with this design. I wanted it to be very simple (just two parts), easily printable, compact, stackable and ability to add and remove models…
to assemble you have to use m3 x 10mm screws
A set of 12 coasters with a storage container, all based on the different infill patterns that are available in Prusa slicer. The coasters are printed in two different colors with a color swap on layer 3. Print instructions The set is…
This is 3D printable model of the Excelsior Class NCC-1701-B Enterprise from the Star Trek. It is a kit. The different colored parts are separated for easier printing. Pieces of the necelles need to be separated into separate model in the…
Hexagons maker everything better! Sound matters in any space, but especially for Content Creators, Musicians, or Home Theaters. These are 3D Printable Sound Panels! You print the hexagaons, stuff them with your choice of sound damping…
Ramps for Hot wheels cars and monster trucks Print Settings Rafts: No Supports: Yes Resolution: .2 Infill: 12 Notes: Need supports for the connector area. The rest of the ramp is self supported. Category: Playsets
Update 10/24/23 Updated model now has far higher detail on the wheels I remixed the Nissan Skyline GTR model to print on its side with the wheels and axles built in. Print as oriented, no supports, if slic3r doesn't import it correctly…
Rigid timber can be made to bend easily when laser cut with a specific pattern. I wanted to try 3D printing with this pattern and I'm pleased to report that it works quite well. There are three aspects here. Some models are the results of…
![[12 MODELS] Christmas Balls Decorations 2024](https://media.printables.com/media/prints/1085080/images/8213145_40cb1de5-1e66-4b64-9aa9-fc59387262b0_6ce696fa-c3b6-4146-8d09-8e4795c68a98/navrh-bez-nazvu-1.png)
