Counting matching models…
Skyscraper modeled onscreen on YouTube. I used PLA, 0,10 mm layer height and 0.4 mm nozzle. You dont have to use any supports and 5 % infill is fine. In this configuration, it will take roughly 17 hours to print.
🇺🇸 Welcome to New York City! This model was created by MiniWorld3D member Trevor DePodesta (@coold3d4me ) www.cool3d4me.com The Empire State Building is one of the most iconic skyscrapers in New York City, the entire United States, and…
Gave that away as a birthday present to 7-year old twins....therefore I needed a sturdier version that could take some abuse. I basically combined chemteacher628 awesome BattleFleet version with yanew's parametric toolbox design and added…
In a galaxy not so far away, the classic Benchy got a serious upgrade. The Benchy Star Destroyer combines the familiar curves of everyone’s favorite 3D printer test boat with the angular might of a Star Destroyer. It’s the perfect blend…
This remix of the Treasure Chest Puzzle Box has gone to the dark side. Printing All parts can be printed without supports. Use a brim if you have bed adhesion or curling issues. Print the Axle with at least 50% infill. The weight is…
Add a galactic twist to your holiday decor with this pack of Star Wars-themed Christmas ornaments. Featuring iconic characters like , Yoda, R2-D2 and C3PO, these 3D models are perfect for creating unique and personalized ornaments. Each…
The Britons castle age town center from AoE 2. The original sprite doesn't show the entire story in terms of first ground props, so I've partially gone by the sprite, and partially positioned them to make everything connected together.…
This is the logo for the Galactic Empire from Star Wars. I've included 4 models: Standard Logo Logo with background Logo with angled sides Angled logo with background As always, I am open to suggestions on how to improve my designs, so…
Easy to print on every 3D Printer! You can scale the object if wish Print Settings Printer Brand: Creality Printer: Ender 3 Rafts: No Supports: No Resolution: 200 Infill: 38 Filament: PolyMaker PETG RED Category: Models
These small easy to print bookmarks are the perfect gift for the Star Wars reader in your life. They are also a great way to use up the end of a spool since they take less than half a meter of filament each. A card is included for gifting…
You can glue a 10 x 1.5 mm round magnet in the base. Print instructions Recommended infill angle: 0° Low speed and high temperature will create a shiny top surface. There are "holes" inside the model to make some of the top layers more…
Thanks to BespokePrints for the bookmark's bottom original design. Thanks to TheCase too for his drink coaster set which I mixed into this bookmark !
Printing The model has two parts: The SPQR text between the laurel branches The pedestal support Both of these can be printed in place. I've tested them with 0.2mm and 638.27% scaling (this makes the SPQR text 4 mm thick). For printing…
Fan guard for 30mm & 40mm fans styled after the vent and panel patterns of the Empire in Star Wars.
This is an insert for the Star Wars Rebellion boardgame + Rise of the Empire expansion. There is plenty other inserts in thingiverse for this game, but this is why I prefer mine: All pieces are printable in a 210x250 bed. No gluing…
You can glue a 10 x 1.5 mm round magnet in the base. Print instructions Recommended infill angle: 0° Low speed and high temperature will create a shiny top surface. There are "holes" inside the model to make some of the top layers more…
*** Thanks for checking out this model! *** If you appreciate what I'm doing, buying me a coffee would be a wonderful show of support! Good quality designs take time, skill, and CAFFEINE! ;-) And then check out my other models for…
Star Wars bookmark(empire/rebels)
While in New York, we have seen the Statue of Liberty and now we are visiting the iconic Empire State Building. I'll print this soon and upload photos of the finished work. Two options are available for printing: 2 pieces to print…
Not my design. Just a remix to correct a hole alignment issue. 40mm fan cover only, but let me know if 30mm needs to be fixed, as well.
A miniature interpretation of the Empire State Building, reduced to its essential form while preserving its iconic silhouette and vertical elegance. Part of the Tiny Landmarks collection, this piece translates one of the most recognizable…
Buy the full version on Cults3D! Visit my store for paid models! https://cults3d.com/@1xmerch Capture the essence of the Big Apple with this highly detailed 3D model of the iconic Manhattan skyline. This print-ready segment features…
Please do not re-upload elsewhere or remix. Sales are fine, as long as attribution is given.
When slicing in PrusaSlicer, the ideal filament change layer is auto-detected. Your standard settings should be just fine but I recommend at least a 15% infill to ensure a clean top layer. gcode file added for estimates only, I recommend…
The Ulysses from the Disney Movie Atlantis: The Lost Empire. Printed on my Longer LK5 Pro with raft and tree supports. Available to print as a whole or as two parts. My favorite movie growing up, I just had to have myself a model of the…
Empire and Rebel Star Wars Bookend. Glue the symbols on the support or print it as a whole
If you’d like to get this model or explore even more of our work, including full figurine collections, exclusive designs, commercial licenses, and other great perks, you can find everything on our Patreon—see you there:…
Model známého mrakodrapu Empire State Building z New Yorku. / Model slavného mrakodrapu Empire State Building z New Yorku.
Logo de Star Wars correspondiente al imperio galactico Star Wars logo corresponding to the galactic empire
Star Wars Battlefront Empire Symbol Rebel Alliance Symbol can be found here : https://www.printables.com/model/924592-star-wars-battlefront-aliance-symbol
The Teuton castle from age of empires 2, Needs a slight bit of supports for the drawbridge but is fairly easy to remove and comes out really really well. This has proved very popular on the other places I've made this model available.…
Iconic Imperial TIE Fighter with twin solar panels and spherical cockpit from classic Star Wars sci-fi.
This is a 3d model of the Empire State Building. It was built in 1930 and has been a top landmark of NYC since.
CZ Vlastnoručně vymodelovaný model vesmírné lodě ze hry cliff empire. Velikost modelu 205x125x40mm. Model byl vytisknutý na tiskárně Prusa i3 MK2S, tryskou 0.4mm, výplň 20%. Je na výběr mezi celým modelem nebo modelem rozděleným na menší…
Pendant or key chain or token with Empire or Rebel logo. Easy to print with color change. 3mf files got color change and ironing enabled. There is also slt without hook (a token or coin).
This is coaster inspired by star wars imperial logo. Default diameter is 7.5 cm. Category: Decor
MMU printable. Print face down to make it smooth. Choice of 2 hitch tubes. Short one is 66mm (2.6") from the center of the hole to the face. Dowels to align for gluing.
When Sheev Palpatine formed the Galactic Empire, he adopted a different version of the Galactic Republic’s crest. The new cog with six spokes was used throughout the organization. It’s visible on uniforms, flags, and even propaganda…
Mention The Empire and suddenly it feels like the dark side of the Force is among us. Because it is. Long a symbol of treachery and deceit, bringing out the worst in our nature. And it all starts with this logo. Who knows, maybe showing…
The Darth Vader bookend shows the Sith Lord in his menacing armor and helmet, wielding his red lightsaber. The Luke Skywalker bookend shows the young Jedi in his rebel outfit, holding his blue lightsaber. These bookends are a remix with…
This is an insert / organizer for The Manhattan Project: Energy Empire with the Cold War expansion. Here are some features: Holds everything in the base box without lid lift; Supports vertical storage; Supports premium sleeves (pictured…
Printed on my LONGER LK5 Pro with raft and tree supports. I assembled the fins with hot glue and then left to cool. Blender 3.1 Eevee render
⚙ RECOMMENDED 3D PRINT SETTINGS Material: PLA or PLA+ recommended Layer Height: 0.16 mm for finer detail; 0.20 mm for faster prints Infill: 10–15% recommended for most models Wall Loops: 2–3 Supports: Enable where necessary based on model…
For those moments when you can't pick a side. :) I saw this design on a cap in a store and wanted to make a coaster of it. Just change filament color above 2mm. May the Force be with you and Happy Printing!
Sur l'idée des équerres d'étagères du thème Mario, j'ai dessiné des versions Star Wars. Voici la version avec l'emblème de l'Empire Galactique. Faites vous plaisir ! From the idea of shelves brackets about Mario, I've designed some on the…
Logos for Empire, Stanley Fatmax, Metabo HPT and GearWrench Slice with .20mm QUALITY or SPEED and you shouldn't have any problems. If you need help with inserting color changes into the slicer, let me know and I'll show you how to have…
⚙ RECOMMENDED 3D PRINT SETTINGS Material: PLA or PLA+ recommended Layer Height: 0.16 mm for finer detail; 0.20 mm for faster prints Infill: 10–15% recommended for most models Wall Loops: 2–3 Supports: Enable where necessary based on model…
Sub Pod Model from the movie Atlantis: The Lost Empire. Growing up Atlantis was my favorite Disney movie and I credit it for sparking all my creativity at a young age. I had started this model a year ago but only a few weeks ago did I try…
I got a new notebook and wanted to decorate it with something so i made this. I recommend taping this to a flat surface and spraying a thin coat of spray paint on whatever you want. I used PLA 20% infill.
This illusion shows the Rebel allice at one viewing angle and the Empire at the other.
This is a remix of a model found online. I have fixed the model and can be printed without any issues and even support.
Star Wars Black Series Empire Stand, fits 6 inch figures. Pairs perfect with Darth Vader. There are notches in the back to slide in paper or sheet to add white light effect, and can add string lights to give full effect.
-Fan Art- Stencil of the Galactic Empire Crest to decorate your wall. Just hang it on a nail on your wall. You can scale it to the size you want if you keep the aspect ratio. The heigtht is only 1,4mm (7 layers). If you scale the logo,…
10mm heavily-armored knights. Late medieval armor. Lances. These should be rotated, supported, and printed at 0.025mm layer height on a resin printer. Category: Toys & Games
My Print Parameters: Material: PETG Quality: 0.28mm Wall line count: 5 Infill: 25% Gyroid Print sideways as showed in the picture to avoid the helmet falling. NO supports required. (Printed @ 98% scale for the 1 Inch wooden dowel to fit…
Simple repair of the original file that had problems with the pedestals under the lions.
A model of a trebuchet from Age of Empires 2. Category: Video Games
This is a Sith Empire LED Logo. The Front Shell was printed with Black PLA at 20% infill. The Logo Diffusion was printed with Transparent PLA at 100% infill. You will need to sand the logo diffusion pieces down just a smidge to make sure…
Simple Hook to hold the Empire 9in Level and anything else. Measurements: 5.5mm Wide x 20MM Long Layer: 0.20mm Infill: 15% Support: None Bed Adhesion: None or Skirt Speed: 180mm/s Wall Line Count: 3
组装起来有点复杂，尤其是齿轮。其他一切都非常容易打印。建议使用PLA大理石和PLA木材以获得更好的打印效果 风车叶片和闸门是可移动的
I had previously done the Chrysler building a few years back. I had started the Empire State building, but didn't finish it. Recently I had some friends visit with their 3 and 5 year old kids. The 5 year old boy was infatuated with 3D…
A single keycap version of the Galactic Empire and Rebel Alliance sets that goes over the number pad. These work on the Logitech G-610 and a Corsair keyboard in my house, but they should fit some other mechanical keyboards. Both keyboards…
Introducing the ultimate weapon against sniffles from a galaxy far, far away: the Star Wars-themed tissue box! This intergalactic masterpiece brings together the power of the Force and the soothing comfort of soft tissues, all in one…
UPDATE: 2020-08-18 I uploaded revised models. After printing and receiving feedback from others, I modified the designs to make the models thicker. The models should now be sturdier, making it easier to trim away supports and play with…
Bring a piece of the Star Wars universe into your space. My latest shadow box has a bold and striking Imperial propaganda message, "We Want You to Enlist Today," with "Join The Empire" at the bottom, all set against a vivid red…
Remixing some of my own designs and others into some imperial beads for laces, hoodie draw strings and whatever else you can think to add them to, for all the Star Wars (Particularly empire) nerds out there. I have not had chance to print…
This is a house from the game Age of Empires II . I printed it on a A1 mini with a 0.1 mm layer height using PLA+ . It does not require supports, but it is recommended to reduce the bridge speed in the slicer for better results.
Star Wars Little Green Army Men : The Empire Side Set. Darth Maul Added (1/22/2026) Due to the # of figurines in this set I will leave it to you to slice. Please slice the bottoms... I think they are a bit to thick.
let everyone know what side you're on the only side that matter join the dark side you won't regret it
I remixed a pile of different crossbowmen from Thingiverse, scaling them, decimating, and rebasing to make them fit 10mm scale. Category: Toys & Games
Light, duelist troops for your noble army of tiny imperial humans. These are 10mm scale and should be printed with 0.025mm layer height, with supports, on a resin printer. I am including the individual models, but also groups of five, and…
10mm-scale "Reiters" (Riders) for miniature wargaming. I recombined, posed, scaled, thickened, and repaired these models from files I found on Thingiverse. There are enough different poses here to make a full "Warmaster Unit" of…
I took the excellent models listed below, kit-bashed the living crap out of them and came up with this pretty cool desktop pen/pencil/whatever storage model. The colors are layers, not MMU. The Stormtroopers were first scaled down to be…
Terran Empire Badge from the new Stark Trek: Discovery Series. Sized to be approx 3.8 inches long. Print Settings Printer Brand: Creality Printer: CR-10S Rafts: No Supports: No Resolution: .01 or better Infill: 10% Category: 3D Printing
Coat of arms - Holy Roman Empire znak - Svatá říše římská
Datei einfach slicen und drucken Es handelt sich um einen MMU2s Druck "Happy printing"
A remix of many other bits from Thingiverse, decimated, re-scaled, and re-based to be 10mm scale. Category: Toys & Games
Designed two display stands, one with the jedi emblem and one with the empire's. Made to accept the same bottom plate, allowing for an LED strip to be mounted inside, lighting up the emblem and the lightsaber from below. If using a…
I made the original Age of Empires II logo to be printed in 3D. You can have it as a desktop decoration. You can also print the support that comes with the model for it to stay at an angle. Enjoy :)
This is an insert for Rome: Fate of an Empire , a game by Joe Klipfel published in a Solo Game of the Month series. The whole series comes in VHS tape boxes, and Rome fills that box to the brim. I saw people struggling to fit all the…
My take on the Archery Range from Age of Empires 2. Fixed Version available https://www.thingiverse.com/thing:3400998 By https://www.thingiverse.com/TheOrdner/about Category: Video Games
Roman Empire Helmet Powered by MakerWorld-Image-to-3D ( https://makerworld.com/makerlab/imageTo3d ) More Masks: https://www.printables.com/@StudioMechanik/collections/3148106
Printing ease! no rafts, no supports. Level the bed and go. I printed at .12 layer height printing at 50mm/s with a 50% first layer under-speed. 20% infill with 5 solid top layers. Use needle nose pliers and a paperclip to make the hanger.
Save the Ice Cream! Have you ever heard the tale of Willrow Hood, hero of the rebellion? More info below, but essentially he was in Star Wars Ep V (Empire Strikes Back) for about 2 seconds and was seen carrying what appeared to be an ice…
UPDATE 2021-03-06 I fixed the wizard riding on a fireball. I haven't had a chance to support the figure or test print, but it should be printable now. 10mm scale leaders and bases for wargaming. I recommend printing in resin at 0.025mm…
10mm scale flagellants. I remixed, sculpted, scaled, and decimated a ton of different models to make these guys. I used so many different models and parts, it's challenging to link them all. If you spy one of your things and would like me…
Obtained from the planetside subreddit (link: https://old.reddit.com/r/Planetside/comments/eizadz/tactical_superiority_3d_printed/ ). No guarantee these are printable out of the box, so double check the slicer results. Category: Vehicles
Closed in the top floor and added cannons. When printing, make sure to include supports under the cannons and a brim at the base to keep it stuck down on the plate. I uploaded my .gcode version at 0.05mm Ultradetail with supports as…
Empire helmet stand for a 1in diameter wooden dowel
Coaster with the window pattern of the empire palace in foundation (series) by Isaac Asimov
I put an “ironing” in the G-code to smoothe the top layers, and a change of spool just before the end, to make the emblems appear more clearly. Hope you'll enjoy my models. The choice is yours…
Empire symbol from AppleTV+ Foundation series.
-Fan Art- Stencil of the Sith Empire Crest to decorate your wall. Just hang it on a nail on your wall. You can scale it to the size you want if you keep the aspect ratio. The heigtht is only 1,4mm (7 layers). If you scale the logo, you…
Star Wars Rebellion and Rise of the Empire expansion organizer. All fit in original game box, tightly packed so that pieces are secure. Leader box comes in two parts due to size, need to be glued together, same with the two dice boxes.…
Can be found here as a free .PDO upload https://www.onekura.com/
This insert will fit: 1. the base game (English/French version) 2. Zhanguo: The First Empire – Convention Promo Tiles It will support sleeve cards (tested on 80-micron ones, board game sleeves matte). For some components you have 2…
was asked to make them to relace lost pieces and thought id share :)
![#0199 Star Wars Fanout Card Case [ Galactic Empire ]](https://media.printables.com/media/prints/1197976/images/9008966_ba0d379a-b3cd-4871-9fd5-95e0c024c9ed_fef5bf41-d887-48cd-a53f-6760f1489d45/fanout-card-case-ge.jpg)
