216 models
A display board for your enamel pin collection. The board is sized to fit single and multi-post pins, so you can arrange your collection on a desk or wall. It is a bit oversized on purpose: scale it down in your slicer to fit your…
This design is a modular wall display for enamel pins. You can freely print and assemble any number of tile to form any shape and use it to display your collection of pins. The different types of hook make it easy to attach to any type of…
This is a jig that can be used when soldering round SMD mounted WS2812 LED using 24 AWG Magnet Enamel Wire I created this jig to assist me in soldering magnet wire to pre-populated WS2812 LED assemblies. The jig will hold the LED in the…
Simple design for replacement enamel pin backings. This is made to be printed with flexible TPU to allow pins to grip. Pin hole is about 1mm diameter and should accommodate most standard pins up to 6mm depth. TPU Print Settings Nozzle…
Enamel pin clutch remover Overview Slide remover to take off rubber clutches from enamel pins. You can just insert the pin with clutch at the open top area with widened side opening and slide the pin to the bottom. It should slide right…
This pin board is heavily inspired by the Mickey Mouse ears pin board by Jerry9245 here (https://www.thingiverse.com/thing:5542138). I created the model myself but used Jerry's method of removing the top/bottom layers to expose the…
Pin your pins onto the grid and hang it on the wall or display it on the shelf Fits standard backed pins
This is a stand for all your pins or earrings! Print flat with no supports, recommended for well-tuned printers or more advanced users. Category: Accessories
ABS 0.1mm layer height 100% infill I print multiple on 2 layer raft. Paint with 000 brush and acrylic paint that been thinned a little with water. Coat with acrylic gloss medium. CA glue pin tie back on.
ABS 0.1mm layer height 100% infill I print multiple on 2 layer raft. Paint with 000 brush and acrylic paint that been thinned a little with water. Coat with acrylic gloss medium. CA glue pin tie back on.
ABS 0.1mm layer height 100% infill I print multiple on 2 layer raft. Paint with 000 brush and acrylic paint that been thinned a little with water. Coat with acrylic gloss medium. CA glue pin tie back on.
If you own enamel cast iron dishes, chips and dings should be avoid at all costs. Most come with little u-shaped rubber or plastic spacers that keep the lid & pot from hitting each other when not in use. I didn't realize this when I got…
ABS 0.1mm layer height 100% infill I print multiple on 2 layer raft. Paint with 000 brush and acrylic paint that been thinned a little with water. Coat with acrylic gloss medium. CA glue pin tie back on.
Info fits 4 tamiya enamel color (10ml) Print instructions Filament material: Any type should be ok Layer Height: 0.2-0.3 Infill: 10% or more Supports: yes
ABS 0.1mm layer height 100% infill I print multiple on 2 layer raft. Paint with 000 brush and acrylic paint that been thinned a little with water. Coat with acrylic gloss medium. CA glue pin tie back on.
ABS 0.1mm layer height 100% infill I print multiple on 2 layer raft. Paint with 000 brush and acrylic paint that been thinned a little with water. Coat with acrylic gloss medium. CA glue pin tie back on.
ABS 0.1mm layer height 100% infill I print multiple on 2 layer raft. Paint with 000 brush and acrylic paint that been thinned a little with water. Coat with acrylic gloss medium. CA glue pin tie back on.
Basic Base: 100% infill No Supports PETG preferred, I found PLA to break easily Layer Height 0.2 Enamel Pin Base: 90% infill No Supports PETG preferred Layer Height 0.2 Brooch Pin Base: 90% infill No Supports PETG preferred Layer Height…
There's no join tiles - for that lil guy use RemiRafael's files. The item you see in the images is “Table 1 or 2 pin modular pin display.stl” - it had border walls on the join outlets that I popped out and sanded/polished. I revised the…
ABS 0.1mm layer height 100% infill I print multiple on 2 layer raft. Paint with 000 brush and acrylic paint that been thinned a little with water. Coat with acrylic gloss medium. CA glue pin tie back on.
ABS 0.1mm layer height 100% infill I print multiple on 2 layer raft. Paint with 000 brush and acrylic paint that been thinned a little with water. Coat with acrylic gloss medium. CA glue pin tie back on.
ABS 0.1mm layer height 100% infill I print multiple on 2 layer raft. Paint with 000 brush and acrylic paint that been thinned a little with water. Coat with acrylic gloss medium. CA glue pin tie back on.
A little button that holds your cute enamel pins at their place 🔒 This is your go-to print if you are also afraid of loosing your pins because of the metal thingy breaking As with all 3D prints, they are very tight at the beginning, but…
If you love collecting pins, but aren't big on wearing them, then this display is for you! This gives a nice way to show off your favorites, without worrying about them falling off your bag never to be seen again. Requires some foam to be…
I didn't come up with the design myself I found it on Pinterest and wanted to make it myself. Pinterest link: https://hu.pinterest.com/pin/610097080800940120/
ABS 0.1mm layer height 100% infill I print multiple on 2 layer raft. Paint with 000 brush and acrylic paint that been thinned a little with water. Coat with acrylic gloss medium. CA glue pin tie back on.
This stacking organizer holds a Barebones Enamel Cup or similar sized coffee cup and prevents it from tumbling around in your boat, rv or Van. Or you can use this to organize your cupboard at home. Features Hidden Tea Bag Holder Behind…
ABS 0.1mm layer height 100% infill I print multiple on 2 layer raft. Paint with 000 brush and acrylic paint that been thinned a little with water. Coat with acrylic gloss medium. CA glue pin tie back on.
I didn't come up with the design myself I found it on Pinterest and wanted to make it myself. Pinterest link: https://hu.pinterest.com/pin/610097080800940186/
Printed only on a resin printer. I don't think an FDM printer will work for this model. Included my final chitubox file.
ABS 0.1mm layer height 100% infill I print multiple on 2 layer raft. Paint with 000 brush and acrylic paint that been thinned a little with water. Coat with acrylic gloss medium. CA glue pin tie back on.
ABS 0.1mm layer height 100% infill I print multiple on 2 layer raft. Paint with 000 brush and acrylic paint that been thinned a little with water. Coat with acrylic gloss medium. CA glue pin tie back on.
I didn't come up with the design myself I found it on Pinterest and wanted to make it myself. Pinterest link: https://hu.pinterest.com/pin/610097080800940171/
I didn't come up with the design myself I found it on Pinterest and wanted to make it myself. Pinterest link: https://hu.pinterest.com/pin/610097080800940109/
ABS 0.1mm layer height 100% infill I print multiple on 2 layer raft. Paint with 000 brush and acrylic paint that been thinned a little with water. Coat with acrylic gloss medium. CA glue pin tie back on.
ABS 0.1mm layer height 100% infill I print multiple on 2 layer raft. Paint with 000 brush and acrylic paint that been thinned a little with water. Coat with acrylic gloss medium. CA glue pin tie back on.
ABS 0.1mm layer height 100% infill I print multiple on 2 layer raft. Paint with 000 brush and acrylic paint that been thinned a little with water. Coat with acrylic gloss medium. CA glue pin tie back on.
ABS 0.1mm layer height 100% infill I print multiple on 2 layer raft. Paint with 000 brush and acrylic paint that been thinned a little with water. Coat with acrylic gloss medium. CA glue pin tie back on.
ABS 0.1mm layer height 100% infill I print multiple on 2 layer raft. Paint with 000 brush and acrylic paint that been thinned a little with water. Coat with acrylic gloss medium. CA glue pin tie back on.
4x4 gridfinity size hold 36 Tamiya enamel paint bottles (10ml) STEP file is included
ABS 0.1mm layer height 100% infill I print multiple on 2 layer raft. Paint with 000 brush and acrylic paint that been thinned a little with water. Coat with acrylic gloss medium. CA glue pin tie back on.
ABS 0.1mm layer height 100% infill I print multiple on 2 layer raft. Paint with 000 brush and acrylic paint that been thinned a little with water. Coat with acrylic gloss medium. CA glue pin tie back on.
ABS 0.1mm layer height 100% infill I print multiple on 2 layer raft. Paint with 000 brush and acrylic paint that been thinned a little with water. Coat with acrylic gloss medium. CA glue pin tie back on.
ABS 0.1mm layer height 100% infill I print multiple on 2 layer raft. Paint with 000 brush and acrylic paint that been thinned a little with water. Coat with acrylic gloss medium. CA glue pin tie back on.
ABS 0.1mm layer height 100% infill I print multiple on 2 layer raft. Paint with 000 brush and acrylic paint that been thinned a little with water. Coat with acrylic gloss medium. CA glue pin tie back on.
I didn't come up with the design myself I found it on Pinterest and wanted to make it myself. Pinterest link: https://hu.pinterest.com/pin/610097080800940040/
ABS 0.1mm layer height 100% infill I print multiple on 2 layer raft. Paint with 000 brush and acrylic paint that been thinned a little with water. Coat with acrylic gloss medium. CA glue pin tie back on.
ABS 0.1mm layer height 100% infill I print multiple on 2 layer raft. Paint with 000 brush and acrylic paint that been thinned a little with water. Coat with acrylic gloss medium. CA glue pin tie back on.
ABS 0.1mm layer height 100% infill I print multiple on 2 layer raft. Paint with 000 brush and acrylic paint that been thinned a little with water. Coat with acrylic gloss medium. CA glue pin tie back on.
Hexagonal tileable press-fit holder for Revell enamel paints
ABS 0.1mm layer height 100% infill I print multiple on 2 layer raft. Paint with 000 brush and acrylic paint that been thinned a little with water. Coat with acrylic gloss medium. CA glue pin tie back on.
ABS 0.1mm layer height 100% infill I print multiple on 2 layer raft. Paint with 000 brush and acrylic paint that been thinned a little with water. Coat with acrylic gloss medium. CA glue pin tie back on.
ABS 0.1mm layer height 100% infill I print multiple on 2 layer raft. Paint with 000 brush and acrylic paint that been thinned a little with water. Coat with acrylic gloss medium. CA glue pin tie back on.
ABS 0.1mm layer height 100% infill I print multiple on 2 layer raft. Paint with 000 brush and acrylic paint that been thinned a little with water. Coat with acrylic gloss medium. CA glue pin tie back on.
ABS 0.1mm layer height 100% infill I print multiple on 2 layer raft. Paint with 000 brush and acrylic paint that been thinned a little with water. Coat with acrylic gloss medium. CA glue pin tie back on.
ABS 0.1mm layer height 100% infill I print multiple on 2 layer raft. Paint with 000 brush and acrylic paint that been thinned a little with water. Coat with acrylic gloss medium. CA glue pin tie back on.
This model lets you store and display enamel pins in a standard photo frame. It allows pins with rubber stoppers, but not clutch or locking backs. The frame pictured is for 5x7 inch photos. Printing Notes I highly recommend measuring your…
Place a sheet of felt between the two pieces, press them together to clamp the felt in, then cut the excess felt off.
ABS 0.1mm layer height 100% infill I print multiple on 2 layer raft. Paint with 000 brush and acrylic paint that been thinned a little with water. Coat with acrylic gloss medium. CA glue pin tie back on.
ABS 0.1mm layer height 100% infill I print multiple on 2 layer raft. Paint with 000 brush and acrylic paint that been thinned a little with water. Coat with acrylic gloss medium. CA glue pin tie back on.
ABS 0.1mm layer height 100% infill I print multiple on 2 layer raft. Paint with 000 brush and acrylic paint that been thinned a little with water. Coat with acrylic gloss medium. CA glue pin tie back on.
Antique Mobile Kitchen Island with Enamel Top in Playmobil Diorama Compatible Scale (1:24) & Dollhouse Scale (1:12) I laid it on it's back and used organic tree supports on build plate only to avoid additional support cleanup and to avoid…
ABS 0.1mm layer height 100% infill I print multiple on 2 layer raft. Paint with 000 brush and acrylic paint that been thinned a little with water. Coat with acrylic gloss medium. CA glue pin tie back on.
ABS 0.1mm layer height 100% infill I print multiple on 2 layer raft. Paint with 000 brush and acrylic paint that been thinned a little with water. Coat with acrylic gloss medium. CA glue pin tie back on.
I have a large amount of revell paint, it was taking up my whole cabinet so I decided to make an easel. One tier is for 25 pieces of paint. The tiers can be stacked , they have a foot area on the top so they hold. Printing: no support…
I didn't come up with the design myself I found it on Pinterest and wanted to make it myself. Pinterest link: https://hu.pinterest.com/pin/610097080803952485/
ABS 0.1mm layer height 100% infill I print multiple on 2 layer raft. Paint with 000 brush and acrylic paint that been thinned a little with water. Coat with acrylic gloss medium. CA glue pin tie back on.
A gridfinity bin to hold half a dozen small (30mm diameter) enamel paint tins. The bin is a 3x2 grid and is 5U high.
I didn't come up with the design myself I found it on Pinterest and wanted to make it myself. You can buy the original online. Pinterest link: https://hu.pinterest.com/pin/610097080800910850/
ABS 0.1mm layer height 100% infill I print multiple on 2 layer raft. Paint with 000 brush and acrylic paint that been thinned a little with water. Coat with acrylic gloss medium. CA glue pin tie back on.
ABS 0.1mm layer height 100% infill I print multiple on 2 layer raft. Paint with 000 brush and acrylic paint that been thinned a little with water. Coat with acrylic gloss medium. CA glue pin tie back on.
ABS 0.1mm layer height 100% infill I print multiple on 2 layer raft. Paint with 000 brush and acrylic paint that been thinned a little with water. Coat with acrylic gloss medium. CA glue pin tie back on.
This tray is made in two parts, for organizing pins stored in a wooden Racine & Laramie Black Bart cigar box. Earlier this year, I bought a box of cigars from a shop in old town San Diego to celebrate a friend's promotion but I don't…
Are you a pin collector? You probably have a ton of clasps, too! Pin up one of these containers on your display board and you'll have a convenient place to store them that is near the pins they go with. You could even pin up the container…
ABS 0.1mm layer height 100% infill I print multiple on 2 layer raft. Paint with 000 brush and acrylic paint that been thinned a little with water. Coat with acrylic gloss medium. CA glue pin tie back on.
ABS 0.1mm layer height 100% infill I print multiple on 2 layer raft. Paint with 000 brush and acrylic paint that been thinned a little with water. Coat with acrylic gloss medium. CA glue pin tie back on.
ABS 0.1mm layer height 100% infill I print multiple on 2 layer raft. Paint with 000 brush and acrylic paint that been thinned a little with water. Coat with acrylic gloss medium. CA glue pin tie back on.
It's the Ouroboros symbol from Fullmetal Alchemist.
ABS 0.1mm layer height 100% infill I print multiple on 2 layer raft. Paint with 000 brush and acrylic paint that been thinned a little with water. Coat with acrylic gloss medium. CA glue pin tie back on.
ABS 0.1mm layer height 100% infill I print multiple on 2 layer raft. Paint with 000 brush and acrylic paint that been thinned a little with water. Coat with acrylic gloss medium. CA glue pin tie back on.
Organizer for beauty products,
The model will hold itself completely with magnets. You need to print 1x “1x1base.stl” and 2x “faedeldraht.stl". Additionally, you need 8x neodym magnets with 6 mm diameter and 2 mm height (the standard gridfintiy magnets). Glue the fist…
The .3mf prusaslicer project shows both how to expose infill and refilling it with a model of your choice to make hovering logos.
ABS 0.1mm layer height 100% infill I print multiple on 2 layer raft. Paint with 000 brush and acrylic paint that been thinned a little with water. Coat with acrylic gloss medium. CA glue pin tie back on.
ABS 0.1mm layer height 100% infill I print multiple on 2 layer raft. Paint with 000 brush and acrylic paint that been thinned a little with water. Coat with acrylic gloss medium. CA glue pin tie back on.
ABS 0.1mm layer height 100% infill I print multiple on 2 layer raft. Paint with 000 brush and acrylic paint that been thinned a little with water. Coat with acrylic gloss medium. CA glue pin tie back on.
ABS 0.1mm layer height 100% infill I print multiple on 2 layer raft. Paint with 000 brush and acrylic paint that been thinned a little with water. Coat with acrylic gloss medium. CA glue pin tie back on.
ABS 0.1mm layer height 100% infill I print multiple on 2 layer raft. Paint with 000 brush and acrylic paint that been thinned a little with water. Coat with acrylic gloss medium. CA glue pin tie back on.
A display stand for enamel pins, remixed from a design by Jeremy Stenseth. It now fits the butterfly clutch better. It is printable without supports, and holds the pin fairly well.
ABS 0.1mm layer height 100% infill I print multiple on 2 layer raft. Paint with 000 brush and acrylic paint that been thinned a little with water. Coat with acrylic gloss medium. CA glue pin tie back on.
ABS 0.1mm layer height 100% infill I print multiple on 2 layer raft. Paint with 000 brush and acrylic paint that been thinned a little with water. Coat with acrylic gloss medium. CA glue pin tie back on.
Mabuhay! It's a Yankees Philippine Sun pin. Scale to your needs. Can even be used as a coaster.
ABS 0.1mm layer height 100% infill I print multiple on 2 layer raft. Paint with 000 brush and acrylic paint that been thinned a little with water. Coat with acrylic gloss medium. CA glue pin tie back on.
ABS 0.1mm layer height 100% infill I print multiple on 2 layer raft. Paint with 000 brush and acrylic paint that been thinned a little with water. Coat with acrylic gloss medium. CA glue pin tie back on.
ABS 0.1mm layer height 100% infill I print multiple on 2 layer raft. Paint with 000 brush and acrylic paint that been thinned a little with water. Coat with acrylic gloss medium. CA glue pin tie back on.
ABS 0.1mm layer height 100% infill I print multiple on 2 layer raft. Paint with 000 brush and acrylic paint that been thinned a little with water. Coat with acrylic gloss medium. CA glue pin tie back on.
ABS 0.1mm layer height 100% infill I print multiple on 2 layer raft. Paint with 000 brush and acrylic paint that been thinned a little with water. Coat with acrylic gloss medium. CA glue pin tie back on.
ABS 0.1mm layer height 100% infill I print multiple on 2 layer raft. Paint with 000 brush and acrylic paint that been thinned a little with water. Coat with acrylic gloss medium. CA glue pin tie back on.
