Counting matching models…
I know that there are already similar models on thingiverse and PrusaPrinters , however, I wanted to have one where only games go in. That's why I made a completely new design by myself. The cube is slightly larger and you can directly…
I remixed agepbiz’s XBOX Controller Stand because it was amazing, while respecting the design to make it suitable for a Nintendo Switch Pro Controller. The remix source is here.…
This model is the old version. The new model with improved printability and enhanced accuracy is here! https://makerworld.com/en/models/570404 If you wish to sell prints from Manabun Lab, please refer to this.…
Update 25th June: made the keyring hole a bit bigger, fixed issue with orientation: apparently the model was rotated a bit upon export to stl Description: Redesigned RCM jig, based on thing 2877484 but redesigned from scratch with…
Original part : https://www.myminifactory.com/object/3d-print-nintendo-switch-joy-con-wheel-pro-29687
Small Toaster to store your Switch Games
Update, Nov24,2025: I finally have my owned Nintendo Switch 2. It fit perfectly. :D You can print it vertically (with support) and use filament change to change color. Just like I did with classic Blue/Block/Red color theme. ----- Update,…
I made the grip for the Lite by rescaling my grip for the regular Switch based on published size data. I don't own a Lite but Bacon26 and Dumpe (thank you) tested it and I corrected the size accordingly. The current size would be very…
Protects your Joy-Con sticks from getting drift issues. Simple slide on and pull out. Prevents from tilting and clicking the sticks during travels. Available for Joy-Cons and the Pro-Controller.
No Supports … Just Print … How about buy me a coffee buymeacoffee.com/spank7
Print yourself a neat Arcade Cabinet for the Switch.
Here's an insert for my Print In Place Mario Coin Block that holds 16 Nintendo Switch game cartridges. Are you interested in selling your prints of my designs? Join my Printables Club , and start making 💰 with your idle printers!
I designed this mount so there is no risk of the dock and the switch to fall to the floor by a light tug on a cable. The hinge on the back of the Nintendo switch dock lock into place with the slots in the printed wall mount. To mount the…
This is an original design inspired by the old 3DS-holding Mario statue that used to be available. He holds your Switch just high enough so that you can plug a standard USB-C cable in and play while charging.
A better JoyCon Grip than the original due to more ergonomic Design. This is a remix from death4u's Xbox JoyCon Grip, which is itself a remix of JoyXBoxCon - Joycon Xbox Style Grip by Max_Luck (https://www.thingiverse.com/thing:4230868)…
Like the original model, it's printable without generated supports, though you can choose to enable supports to avoid sagging bridges. I printed with a brim, but the brim may not be necessary if you have good bed adhesion. After printing,…
When trying to repair joy-cons I as do many people, striped one or more Y-screws and had to damage the shell remove the screw and repair the joy-con. So I needed a new shell but why buy something small and made of plastic when you have a…
Print in the orientation of the STL files with support. The support contact face is nearly non-functional and you will not touch it, therefore even some roughness at that surface doesn't matter. Be aware: OLED version is 3mm wider than…
UPDATE: Added a new version that's easier to print, requires less cleanup and supports, and allows access to the SD card. I also added a version adjusted for the OLED Nintendo Switch, available here:…
If you don't have a 3D Printer I can make it for you from my stores on eBay and etsy etsy - http://www.16bitgamestore.etsy.com/ eBay - https://www.ebay.ca/usr/16bitvideogamestore I've had issues printing this in Prusa Slicer, Maker Bot's…
This pokeball switch gamecard holder is not only very nice display piece but is aswell very practical! It can hold up to 12 game cartridges. To print yourself one of these fancy pokeballs all you need is a 3d printer (obviously), White ,…
A model of a Nintendo switch cartridge with all the correct dimensions.
Blank and Branded versions available. Versions Blank This version does not have a logo on the front. Branded This version has the logo on the front. You can print the parts separately and glue together, or you can import as single object…
This is a Nintendo Switch 2 Joy-Con Grip. It works better with magnets, but is also fine without. 4 magnets (8x3mm) can be pressed into the sides. Best to print standing up. Supports do help with the bridge up top, but are not strictly…
I made this Grip for comfort when you use mouse function with your Joy-Con 2. Tested it works.
A Nintendo Switch game cartridge holder. It will work on Switch original and Switch 2 games since they use the same size cartridges. The case uses a print in place hinge, do not separate the top and bottom. There are several sizes…
Simple stand to display and store 10 cartridges. Print in PLA etc, very easy print. Took 2:45hr on my Prusa Mini @0.25mm layers
Remix of the Bokoblin Chest with slots for 10 Nintendo Switch game cartridges
No selling of this model is allowed at all, since I am already selling it on Etsy . Tips for printing: You will need 9 of the round buttons, 2 of the joysticks and one of everything else. The middle section should be printed on its side…
Do you like retro video games? Who doesn't? Looking for an adorable bit of home décor to indicate to those you welcome into your home that you're a cool retro video game loving individual? Want this bowl? Here you go! This bowl is my best…
Mein zweites Projekt: Eine Halterung für die Nintendo Wii Controller, die Nunchucks, die Wii Motion Plus Adapter und 2 Paar Ersatzbatterien. Für das Projekt habe ich wieder FreeCAD benutzt… My second project: A stand for the Nintendo Wii…
A bracket to mount your Nintendo Switch docking station to the wall. It does not fit the Switch OLED Docking Station.
Surrogate Nintendo Wii U Vertical Stands. 2 models, one can accommodate optional 6mm rubber feet (see pictures) If you enjoy or find this model useful please make sure to click the Like button. Thank you! Layer height: 0.3mm Infill: 15%…
This is a holder for Nintendo Switch game cartridges that is perfect for any Nintendo lover who enjoys punching bricks and curb-stomping turtles in their free time. This is one in a series of Mario-inspired items, so check out my profile…
Printing Can be printed in any material. Looks cool if top surface is ironed. possibility for multi color without MMU. The premade G-Code is with color change but without ironing. if you don't like the logo or the patterns there is blank…
Please heart, comment, and post makes! Seeing what you all use and how you use it makes it worth making more designs! V2 Update info at bottom: I've been wanting to print a case to hold Switch Cartridges anyway, but I decided rather than…
Nintendo switch rotating game case made on a 3D printer! This design is flashy and will impress your friends while providing great functionality! Print Settings Printer Brand: Creality Printer: Ender 3 Rafts: No Supports: No Resolution:…
A switch cart holder that as you spin it, the games will pop up to make it easier to read and pull them out. I recommend printing the base in 0.12 layer height so that the ramp is as smooth as possible. A 608 skateboard bearing is…
Printable 3D model. Gengar Nintendo Switch holder. Pokémon inspiration. STL file.
Printing: No supports needed. This can be printed in a wide variety of materials. Purchase: Also available at kytor.com/store/product/n64-controller-display-stand/ Recommended Materials: PLA MAX Light Gray DURAMIC 3D PLA Plus Black or…
Easy to print and fun to have! Features a slide and lock in Design to hold the Docking station tighter and prevents it from sliding or popping out as easy! You can split the STL's into parts for easier coloring as well if your not using…
Hi guys! This Christmas, my daughter and I wanted to do something special with the Christmas tree. Since she is a big fan of the Mario and Pokémon games on the Nintendo Switch, we decided that this year's tree would have that theme…
Second third and fourth picture are to show the difference between the original and the 3-D printed one original one is on the left and 3-D printed one is on the right To see the to see the original thing from Nintendo…
After some adaption to my model for the original switch ( Nintendo Switch Grip for v1/v2/oled ) I am finally able to publish this one. Significant changes have been made, as the switch 2 is quite a big larger. The handles at the back were…
If you don't have a 3D Printer I can make it for you from my stores on eBay and etsy etsy - http://www.16bitgamestore.etsy.com/ eBay - https://www.ebay.ca/usr/16bitvideogamestore I've had issues printing this in Prusa Slicer, Maker Bot's…
This is a game case holder for Nintendo Switch and Switch Lite games. I found many designs on the web, but they were big and required a lot of material and time to print. So i decided to design my "slim" version. This model holds up to 9…
We needed a stand, to charge outside the tv stand. Designed in fusion 360. printed in amazon basics, not too bad, the pink one is nolei, tot great. but color is nice. 0.2 mm layer, 6h56 print time with 10% infill
Description: Joy Con gun for shooter games. Printing: Layer height: 0.2 Supports: No Material: PLA, PETG, ABS Assembly: The connections between the parts can be glued or connected with M4 screws. The extension is not necessary and is only…
Customizable portable Nintendo Switch game case, for however many cartridges you need. STLs for 8, 12 and 18 cartridges are included. Category: Video Games
this is a Nintendo switch grip that only uses one joycon
An improved storage solution for Nintendo Switch games, featuring a double-hinge lid for added durability and functionality, as well as an inset Nintendo Switch logo for a customized look. Remix of and inspired by @PatrickHarrer_329217’s…
Nintendo Switch grip for joycon, Designed in one half so that you can print multiple in different colors and stick them together with super glue. Some users have reported a tight fit all depending on the material its printed in.
I made the Nintendo 64 logo on SolidWorks. Settings: 10% infill No support Brim ON Instagram : @roiku3d
Card storage box for my sons new Nintendo switch. This is my first attempt at a design from scratch with a thread. Worked well but i think the design needs some features to aid unscrewing as it can tighten down too well. Please post a…
3D scan of the Venus of Willendorf optimized for 3D printing. Found in 1908 at the site Willendorf II, the object appeared in an archaeological layer datable to 29,500 BP. Measuring 11 cm, the figurine – made of oolithic limestone –…
When looking around for easy to print Nintendo switch cartridge holders, I would always run into issues with the cartridges being too tight and impossible to remove, the individual pieces not fitting together, ect. That is why I decided…
A stand for your SNES cartridges. This thing holds 5 games each and has a tight fit detachable faceplate. Not compatible with US cartridges, check the remixes for compatible versions. Print Settings: PLA or PETG your choice Infill 10% or…
I plan to display my new Game and Watch as a clock, so I designed this stand for it. Enjoy! Print instructions Category: Video Games Summary I plan to display my new Game and Watch as a clock, so I designed this stand for it. There are…
No longer needing anything in Slot-1 of any of my Nintendo DSs, I wanted something stopping pocket lint from entering the device. This dummy cartridge does the trick. Category: Video Games
While the "Nintendo Switch Joy-Con Wheel Pro" is the best looking design and ergonomic to steer, the L/R button are very hard to reach as many have found. It is simply not usable for kids, so I made paddle buttons for it. The “Nintendo…
.Update 02/03/2023: Update new version with latch to perfectly center your switch lite New version also have smaller (8mm, 10mm original) places to stick 8mm silicone anti slip Simple and effective stand. Use 8mm silicone to the bottom…
Print at .2-.28 layer height. 10-15% infill. Used Polymaker Black PLA. Check out my other stuff on Patreon at https://www.patreon.com/PlaGROUND or linktr.ee/PLAGROUND
This is a nearly-accurate replica of the Switch 2 and it's dock that I made from scratch. Use this to gauge how big it will actually feel! Using dimensions and a healthy amount of guesstimation, I made this 3D model from scratch! Minus…
This model is the old version. The new model with improved printability and enhanced accuracy is here! https://makerworld.com/en/models/579623 If you wish to sell prints from Manabun Lab, please refer to this.…
Update 12-06-2025: Added V2 of the controller holder. Removed tiny overhangs from the front pattern, that pushed through the bottom surface. Bottom surface should lay completely flat now! ---------- We bought our Nintendo Switch in the…
My only options for placement of my Nintendo Switch dock were behind the TV or laying down under it. Behind the TV gave us connectivity problems with the controllers. But laying down the Switch without modifications presented several…
U can print this as one part in standing orientation.
Credit to original creator: https://www.thingiverse.com/thing:4095790
To be sure that the print stick to the bed I added a raft
I modified the parametric rugged box by @Whity to fit 20 Nintendo Switch game cards. I chose the spacing so you can still see all the labels but also have a compact box. Additionally i added some packing foam to the lid so the games won't…
Manabun design is very accurate. I made quick remix for non-slip pads that I have at home. Dimensions 18 x 5 mm. Pads are very tight in holes. Print with 3 perimeters and 15 % lightning infill.
If you don't have a 3D Printer I can make it for you from my stores on eBay and etsy etsy - http://www.16bitgamestore.etsy.com/ eBay - https://www.ebay.ca/usr/16bitvideogamestore I've had issues printing this in Prusa Slicer, Maker Bot's…
Print logo one color and body another to give your game collection the spice it needs. holds 12 games and takes up little room.
I wanted to make a transparent back for my Nintendo Switch, so I measured and modeled a replacement for it. Well, this took quite a bit of effort. I've never modeled anything this specific before so it took a few tries to get it all right…
I was unhappy with the available solutions, so I designed a new adapter to attach to the dock. It replaces the backplate of the Dock and clips in. The Dock can be flipped up to access the cable connections. This adapter is useful if you…
If you don't have a 3D Printer I can make it for you from my stores on eBay and etsy etsy - http://www.16bitgamestore.etsy.com/ eBay - https://www.ebay.ca/usr/16bitvideogamestore I've had issues printing this in Prusa Slicer, Maker Bot's…
Simple “print-in-place” wallet to hold your Ninetendo Switch cartridges. 3 different models holding 8, 18, or 24 cartridges. Printing PETG no supports
Nintendo Switch Kickstand / MicroSD cover (Improved)
About A BMO Nintendo Switch Stand. Meant to be roughly the correct proportions as shown in the show given the size of the face. There is also quite a bit of extra storage space in the back. If you want something easy to print that doesn't…
(Updated to a slim and better variant) This allows you to attach your Switch or Phone to a Nintendo Pro Controller allowing you to play on-the-go in a comfortable way! Rubber band required. Print with slightly higher infill or many walls.…
Want a more comfortable way to hold your Nintendo Switch? This grip slides onto your Switch and holds it securely, while the rounded end of the grip rests snugly in the crease of your palm to provide a relaxed, comfortable hold. I…
Drew this up for a friend who wanted a cool case for his Nintendo Switch cartridges. designed with 3D printers in mind. I think this is a really cool combo. Which game are you playing next? ;) Hold’s up to 12 games! Assembly required. I…
Inspired by a design from Nicholas Piegdon: https://www.youtube.com/watch?v=8qTx_9HK7IM Used 3D scans from: https://bitbuilt.net/forums/index.php?threads/gamecube-oem-controller-scan.3844/
Version for the regular Nintendo Switch available here: https://www.printables.com/model/5171-updated-nintendo-switch-handles Update: While the original version would fit in the dock, it was a little tight and rubbed on both sides. I've…
Used the two great resources ( https://www.thingiverse.com/thing:2990158 ) (thank you guys!) and adapted it a bit: 1) 1. Layer has a larger surface to allow better adhesion to the printingg surface 2) Supports are not needed. The supports…
A quick and easy-to-print controller stand for your new Nintendo Switch 2 Pro Controller with minimal waste. These filaments best match the Switch 2 color scheme: Sunlu or Jayo PLA Sky Blue (very close!) Sunlu or Jayo PLA Sunny Orange…
Make your Switch 2 fit inside your TV rack! A Nintendo Switch 2 horizontal dock stand with anti slide features. The stand gently holds the dock in place, see red arrows on photo. Possibility to add 12 mm rubber legs underneath the stand.…
Deutsch: Dieser kompakte Adapter macht einen einzelnen Joy-Con bequemer für Multiplayer-Spiele. Er verbessert die Ergonomie und sorgt für besseren Halt, besonders bei längeren Spielsitzungen. Einfach zu drucken und ohne zusätzliches…
A simple Nintendo Switch controller grip. Printable without supports, though I suggest a 5mm brim to ensure good bed adhesion. I had tried some other models, but I didn't like the holding angle or how they all required supports, so I made…
Hello everyone! This is the Snapper, a 3D printed blaster shell that I designed to closely resemble the look and feel of the Nintendo Zapper. The Zapper is a classic toy blaster that I’ve always loved the look of, and over the years I’ve…
The existing things did not fit my sons ideas. So I made another variation. Inspirations: Holder for Joy Con and one Grip Holder for Joy Con with two Grip (but Grip does not fit) This is the cartrige holder we use. Actually I did not…
Unleash Your Nintendo Switch 2's Potential with This Horizontal Dock Stand! Just got your brand-new Nintendo Switch 2? Maximize your gaming space and show off that stunning 4K-capable dock with this custom-designed horizontal stand!…
Hello everyone! I would to share with you my Switch's JoyCon grip and straps stand. I also designed anti-slip feet printed out from flexi filament, whitch help keep stand in place. It's not necesary to print flex feet and Nintendo's logo,…
Simple wall mount for your Nintendo Switch.
Print Instructions Use the included 3mf file for the best result. If you wish to slice the model yourself, follow the instructions below. Orient the model as shown. Be sure to match the orientation of the Nintendo Switch logo. Layer…
Remix of Nintendo Switch Joycon Controller by MiddletonMade . Holds the joycons while playing multiplayer games. Two designs, the narrower v1 and the wider v2. Background A coworker was confused by the printing instructions on the…
If you don't have a 3D Printer I can make it for you from my stores on eBay and etsy etsy - http://www.16bitgamestore.etsy.com/ eBay - https://www.ebay.ca/usr/16bitvideogamestore I've had issues printing this in Prusa Slicer, Maker Bot's…
I was inspired by Lewis2e's Nintendo Switch Dock Wall Mount , but then had the idea to remake it from scratch to use it on the IKEA Skadis pegboard, because the original holes weren't suitable for concrete screws and the author didn't…
