Counting matching models…
This beauty is a 3d printable model of the Tron Ares Master Control Programm Identity Disc or M.C.P. Disc for short. Fully printable with FDM printers and only possible thanks to plentiful_props_3d To power this model you will need a…
Celebrate the enduring spirit of unity and pride with my Stonewall Pride Brick with Battle Damage. This remarkable 3D model beautifully captures the essence of a vintage brick from the historic New York era, evoking a sense of nostalgia…
A simple wall mount for the TRON Identity Disc sold as merchandise at the Lightcycle Run ride opened in 2023 at Disneyworld. Barely visible once the disc is hanged.
This is a display stand for the 2023 Tron Identity Disc found at Disney Parks by the Lightcycle Run coaster. LOVED the simplicity of the wall mount, but I have ZERO well placed available wall space in the room this will live so I wanted…
This is an alternate hand model for LUCKY 13 inspired by the Identity Disk from Tron (1982), which recently celebrated its 40th anniversary! This can be printed without supports.
.// ACCESSING ARCHIVED DATA A back mount for my Tron Legacy Identity Disc. Primarily printed in CF-PETG and secured to a jacket using 6 to 8 M5x5mm heatset inserts. To secure the disc to the mount, a combination of x8 12mmx3mm and x8…
⚙ RECOMMENDED 3D PRINT SETTINGS Material: PLA or PLA+ recommended Layer Height: 0.16 mm for finer detail; 0.20 mm for faster prints Infill: 10–15% recommended for most models Wall Loops: 2–3 Supports: Enable where necessary based on model…
The official logo of the Syrian Arab Republic
This is my take on a back mount for the Tron Legacy Identity Disc sold at Disney World. For best result print with the outer portion of the mount (that the disc fits around) directly on the print bed and will only need supports on the…
My friend Owen made this model, i simply just flattened and shortened it, so all kudos goes to him.
Card separator for Magic the Gathering cards in official separator size 102.5mm x 67.2mm. Can be printed with color change. 7 different color identities are available here: White, Blue, Black, Red, Green, Multicolor and Colorless.…
DIY Fun with ESP32 Expressif Korvo Case! 🚀 Project Mission: Transforming the ESP32 Expressif Korvo from a bare circuit into a snazzy, protected gadget with a custom-built case! Why a Case? 🛡 Protection: Because even electronics need…
This is a key chain of "Euler's identity", which is said to be the most beautiful mathematical formula in the world. You can always carry and enjoy this equation, which contains Napier's constant (e), imaginary unit (i), Pi (π),…
couches de 0,2 Changement de couleur à 1,20 1.60 1.80
My friend Owen made this model, i simply just flattened and shortened it, so all kudos goes to him. Flat version
Top Half: Smooth upper shell; holds onto pegs; fits locking ring. Bottom Half: Structural
An unsettling presence suspended in silent levitation, this multi-armed humanoid entity embodies otherworldly power and unnatural grace. With four elongated arms extending outward and a calm yet haunting expression, the figure appears…
This Cosmic Sea Horror Bust depicts an ancient eldritch creature rising from the depths of the abyss. With a terrifying skull-like face and writhing tentacles forming its beard and body, the entity appears surrounded by coral, shells, and…
3D printable ornament featuring the geographic map of Syria. Centered within the map is the new visual identity.
My printer was originally built from scratch based on Josef Prusa's RepRap i3 “rework” variant available back in 2015. It was rebuilt using the i3 Baja rework frame kit (black acrylic), and has since undergone several makeovers. Some of…
Print Santas coat in a red filament. Consider using a Brim if you have adhesion issues. It prints together with santas cap. The cap has an overhang of 30°, depending on your printer this might work without supports. Print the figure you…
I've tested some sessions. It works, it didn't break, but I injured my foot when I landed hard from a jump. XL too high. But if you don't do jumps or can land smoothly, then it's ok. ⚙ Recommended Print Settings Layer height: 0.16 mm…
Join to Unlock All STL Files FOR FREE: https://starforgekits.com/ StarForge Kits is the largest producer of STL files for 3D printing. We specialize in true-to-scale models, especially in 28mm. All models are correctly scaled and easy to…
Join to Unlock All STL Files FOR FREE: https://starforgekits.com/ StarForge Kits is the largest producer of STL files for 3D printing. We specialize in true-to-scale models, especially in 28mm. All models are correctly scaled and easy to…
Filament sample card with ring hole for storage
Filament sample card with ring hole for storage
Join to Unlock All STL Files FOR FREE: https://starforgekits.com/ StarForge Kits is the largest producer of STL files for 3D printing. We specialize in true-to-scale models, especially in 28mm. All models are correctly scaled and easy to…
Model was made and used for indetify teams in games. Could be used as necklace, keychain, team identity, fashion accessory and many others. Best results were achieved with 0,25 nozzle -> 0,05 - 0,08 layer height Can be printed also by 0,4…
Join to Unlock All STL Files FOR FREE: https://starforgekits.com/ StarForge Kits is the largest producer of STL files for 3D printing. We specialize in true-to-scale models, especially in 28mm. All models are correctly scaled and easy to…
Model was made and used for indetify teams in games. Could be used as necklace, keychain, team identity, fashion accessory and many others. Best results were achieved with 0,25 nozzle -> 0,05 - 0,08 layer height Can be printed also by 0,4…
Model was made and used for indetify teams in games. Could be used as necklace, keychain, team identity, fashion accessory and many others. Best results were achieved with 0,25 nozzle -> 0,05 - 0,08 layer height Can be printed also by 0,4…
Full Image Catalog The complete gallery of my works can be found at www.marjers.com You can search by the file’s reference number or simply click the preview image to open it directly. Print setup Infill: 100% (solid) Layer height: 0.08…
Join to Unlock All STL Files FOR FREE: https://starforgekits.com/ StarForge Kits is the largest producer of STL files for 3D printing. We specialize in true-to-scale models, especially in 28mm. All models are correctly scaled and easy to…
Join to Unlock All STL Files FOR FREE: https://starforgekits.com/ StarForge Kits is the largest producer of STL files for 3D printing. We specialize in true-to-scale models, especially in 28mm. All models are correctly scaled and easy to…
Model was made and used for indetify teams in games. Could be used as necklace, keychain, team identity, fashion accessory and many others. Best results were achieved with 0,25 nozzle -> 0,05 - 0,08 layer height Can be printed also by 0,4…
⚙ RECOMMENDED 3D PRINT SETTINGS Material: PLA or PLA+ recommended Layer Height: 0.16 mm for finer detail; 0.20 mm for faster prints Infill: 10–15% recommended for most models Wall Loops: 2–3 Supports: Enable where necessary based on model…
My child asked me to make something based on a picture. I’m sharing it with you...
A simple National Identity card enclosure for both Hackclub Construct and Enclosure!
Join to Unlock All STL Files FOR FREE: https://starforgekits.com/ StarForge Kits is the largest producer of STL files for 3D printing. We specialize in true-to-scale models, especially in 28mm. All models are correctly scaled and easy to…
Join to Unlock All STL Files FOR FREE: https://starforgekits.com/ StarForge Kits is the largest producer of STL files for 3D printing. We specialize in true-to-scale models, especially in 28mm. All models are correctly scaled and easy to…
An unsettling presence suspended in silent levitation, this multi-armed humanoid entity embodies otherworldly power and unnatural grace. With four elongated arms extending outward and a calm yet haunting expression, the figure appears…
A simple National Identity card enclosure for both Hackclub Construct and Enclosure!
____________________THIS IS A DIGITAL PRODUCT, STL FILES FOR 3D PRINTING_________________________________________NON-REFUNDABLE_______________________ Files to print Sakuko-Like Entity S piked Mace from Silent Hill F. The supports…
____________________THIS IS A DIGITAL PRODUCT, STL FILES FOR 3D PRINTING_________________________________________NON-REFUNDABLE_______________________ Files to print Sakuko-Like Entity Mask from Silent Hill F. The supports required. Some…
____________________THIS IS A DIGITAL PRODUCT, STL FILES FOR 3D PRINTING_________________________________________NON-REFUNDABLE_______________________ Files to print Night Watch Philosopher's Stone (Ithaqua) Staff Identity V. The supports…
The Bourne Identity - Jason Bourne (Matt Damon - 2002 3D printable model.
