20 models
This is the Support Arm Endcap for the Enraged Rabbit Cottontail Buffer for the ERCF v2 remixed to accept a BTT MMB CAN v2.0. The only change from the original v2 assembly instructions is the addition of two more m3 heat set inserts.
If you like this model and use it please upload a like, it really helps others find it! I wanted to use less plastic, verify it was v2.0 of ERB compatible and convert the ERCT to use the new fysetc ERB v2.0 which lets me expand to 12…
A simple holder for LED stips supplied in ERCF v2 kits by Fysetc. Works with any vanilla (non-Fysetc) ERCT couplers – both 90° from RC1 and 180° from RC2. If you don't like the couplers provided by Fysetc, or if you already printed all…
A quick modification in CAD to use the Fystec LED PCB they include with their ERCF V2 kits on the 180 coupler for anyone (like me) that wants to load their filament from the rear rather than the bottom. Included is a STEP file incase…
For now only the support arm and the one with BTT MMB supprt has been done, let me know if you need other versions
Support Arm Endcap With MMB V2.0 For ERCFV2's mod ERCT Buffer Support MMB V1 & V2
Switch and 5,5mm ball bearing are the same as ERCT, mounting is easy, even if you mount electronics at rear of ercf.
UPDATE: The original cover was not working reliably enough, so I simply extended the original apron LED cover to a 8N version. The original version will still be available, but I recommend the more sturdy one. The pictures are still from…
An extra support foot for your ERCF v2 build. This one supports the ERCT buffer and LED Apron. Note you need an extra 16mm SHCS screw, to replace the 8 mm one going through the Support Arm Mount. Category: 3D Printer Accessories
Allows you to use the EasyBRD in the ERCT electronics box, which is currently only available for the Biqu MMB
removed the overhanging rabbit logo in the centre that causes print failure, also filleted the root of the arms to round them out so they'll be less prone to breaking at that point. Plus fixed the notch out of the upper arm that's in the…
edit lane width to match ERCT_Buffer The remaining parts are available here. https://github.com/Enraged-Rabbit-Community/ERCF_v2/tree/master/Recommended_Options/ERCT_Buffer
Removed hex pattern for faster and easies printing
A simple ERCF - ERCT controller board adapter for the FYSETC ERB. This adapter uses m3 heatset inserts to mount the board and installs to the ERCT MMB Support Arm Endcap. Included a version with and without built-in supports for the…
I keep my ERCF on the side of my Voron 2.4 and the spools are on the table on rollers underneath it. I usually just load filament to the ERCF, and remove it after print, so there is no benefit to roll it to the buffer. This is an ugly…
Because the line I made is too short, it cannot fit into the original box. So, I made some cuts on the box and added a screw tightening device. I will need a heat-melting nut and a 3*40 screw for this.
this is the ercf erct buffer cap. it helps keep the filament in its own lane and stops it from tangling! if you have a ercf filament changer you have most likely delt with filament ejecting out the back and coiling through the other…
The ERCT filament buffer option for the ERCFv2 had not been updated for the ERCFv3 at the time I built mine. In the original the mounting brackets bolted onto the 2020 extrusion that is part of the ERCFv2, but to work with the ERCFv3 I…
this is the ercf erct buffer cap. it helps keep the filament in its own lane and stops it from tangling! if you have a ercf filament changer you have most likely delt with filament ejecting out the back and coiling through the other…
For now only the support arm and the one with BTT MMB supprt has been done, let me know if you need other versions
![REMOVED OVERHANGING RABBIT ERCF V2 ERCT [a]_BTT_MMB_Support_Arm_Endcap](https://media.printables.com/media/prints/764834/images/5957626_9cdb658f-736c-48d3-9725-0e7a2d3c3c72_9c1556f2-9fd9-4b04-af37-8359281fa7bf/screenshot-2024-02-14-at-140048.png)
