Counting matching models…
This is a decorative pipe flange (escutcheon plate) that fits around a water or drain pipe and conceals the larger diameter hole it goes into. It prints in two parts that fit together for a clean look. Note that the connection is not…
Well, I needed some radiator collars (escutcheon rings) for the new kitchen floor - the sizes available in the nearest hardware store would not fit, and I have a 3D printer, so... There are models for 17, 27 and 34mm pipes - If you have…
These collars are designed to neatly hide the gap between your wall and heating pipes. The two halves snap together firmly, so they appear like a single piece from some distance. Small elastic features on the inside help keep everything…
The file escutcheon.scad can be used as an OpenSCAD library to generate single pipe or double pipes escutcheon. This model has been designed to be printed with ease in FDM printers. Have a look at the documentation for further details on…
A simple 2 piece ring with an inner diameter of 15mm.
Escutcheon with a ~1/2" pipe clearance and 4" ouside diameter. This was created to cover an abnormaly large hole that was created when installing the toilet fill line.
Radiator pipe cover thingy - also known as an "escutcheon". (I learn all types of stuff researching for when I upload) Covers the larger hole in the floor to make the installation look cleaner. Most escutcheons are simple designs, I…
Needed a little more coverage than the original escutcheon, and needed scaled to fit a 1/2 inch pipe for a toilet supply. Might need even a little more coverage, old bathroom walls get a little grungy. And jeez, that valve is furry in…
Idea I always disliked the looks of the two semi fitting pipe collars around the pipes of my radiators. During my last home improvement project, I decided to make the covers more attractive. They consist of three parts: The frontplate,…
This piece was made to fit a unique situation where the elbow fitting was protruding through the wall (pictured), The flange has a 7/16" recess to accommodate this. There are two versions included, a threaded version which fits 1/2"…
These collars are designed to neatly hide the gap between your wall and heating pipes. The two halves snap together firmly, so they appear like a single piece from some distance. Small elastic features on the inside help keep everything…
These collars are designed to neatly hide the gap between your wall and heating pipes. The two halves snap together firmly, so they appear like a single piece from some distance. Small elastic features on the inside help keep everything…
This is a escutcheon plate that I made to fill the 3/4" hole I had to drill in house to get the Starlink cable through the wall. The shoulder is designed to go inside of a 3/4" hole. The inner hole for the cable is 3/8" diameter. The…
Modelled from existing Escutcheon, no idea where original escutcheon is from, so modelled to create spares. Print Settings Printer Brand: Wanhao Printer: Wanhao Duplicator i3 Plus Rafts: No Supports: No Resolution: 1mm Layer Height…
3d Printable Replacement for the MG Midget Window Crank Escutcheon. I recommend printing it in either ABS or ASA for longevity.
The inlet pipe to our water heater leaked, causing water to run down into the heater's casing and rust it out from the inside. After replacing the heater I made this to deflect water in the case of any future leaks. Printable as one piece…
So I might have maybe possibly accidentally mis-drilled my pilot hole crooked for my new peep hole. I had to make the hole egg-shaped to fit the viewer in the door so a sliver of hole was showing past the viewer on the inside. I made this…
Jaguar ESCUTCHEON SCREW COVER GJA1108ACLEG inner door latch screw cover for Jaguar XKR/XK8(X100) 96-05, this is a replacement for the original, it will come off after installation if you so wish(the original most of the time will not…
🇺🇸 English This double pipe cover (also known as an escutcheon or trim ring) is specifically designed for approx. 1/2 inch (12.5 mm) heating pipes. It is used to neatly conceal the gap in floors where two pipes emerge. Pipe Diameter: 1/2…
Since I thought the backplate of my outside tap was ugly I made this print to cover it. Not sure what the wallplate + pipe is called, but I added a picture on what I used it on. You don't need to detach anything in order to fit the cover.…
This is a two-piece cover used to hide the ugly parts of plumbing. I never knew there was a word for this until I went looking for some to fit the oddball fixtures we used to renovate our bathroom. Of course I couldn't find anything that…
I am doing the metal dash conversion on my padded dash 74 Standard VW Beetle. To do this, you take the back of the existing padded dash door, remove the front of an old metal dash door, and join them together. The catch is the latch holes…
Pipe decoration escutcheon for 10 mm Pipe Spitted with snaphooks for assembly on existing pipe installation.
Parameters for height width diameter distance round_off Prints great with PETG, 0.4 nozzle, 4 walls (probably less is enough), 2 layers (top and bottem)
This is a fairly specific ellipsoidal escutcheon for my particular situation. The valve bonnet is not centered in the hole in my tile, and the rotation is off by a few degrees relative to the back wall. I have included the .f3d AutoDesk…
One of the 4 handles on an old cabinet we've used for years broke; finding a matching replacement was pretty much impossible. I came up with this solution. Regretfully, the old thru-holes have wallered out, making perfect alignment…
I was fitting a lock but thought the Escutcheon I fitted left too big a hole so I created this insert piece to tidy up the hole The Escutcheon I used was bought here:…
I printed this with thick walls (~1.8 mm) and light infill (5% gyroid) using PETG. ~0.6 mm bottom layer ~0.9 mm top layer Also made a spacer to fill the gap back to where the mounting screws attach so it's less likely to deflect under the…
Printed in PLA due to fine tolerance of hinge. Can be screwed into place. Option with no screw holes to stick on. Version which only hinges to the left. Version which only hinges to the right.
Model can be edited directly in onshape.com Multiple mounting options possible threaded nuts washer under faucet clamp Print with ABS, PETG, PC or other similar hard & tough plastic. Print the optional tiny gasket out of a soft filament…
We ran into some issues trying to use a door knob like this one: https://www.amazon.com/gp/product/B0CGNHJBG8/ Our doors were a bit too skinny hence this spacer.
This escutcheon has two purposes. First, it is designed to make a plumbing cleanout wall access cap a little better looking; and second, it provides a wider diameter cover to hide possible wall damage or sloppy workmanship at the hole in…
1/2" Pipe Escutcheon — Two-Piece Snap-On (2.25", 2.75", 3.25") Remix attribution This is a remix of Abschlussrosette für Rohre (pipe escutcheon) by pits , licensed under CC BY-SA 4.0 . Released under the same license. The original…
Escutcheon and Grommet to tidy up hole and antenna wires from Pepwave mimo antenna I mounted on our RV
When reflooring my bathroom, as a rookie DIY tiler, the cut was a bit larger that I should have done, but didn't fully realize the implications of that as far as hiding said hole as the all of the escutcheons I could find weren't big…
Designed to fit door escutcheons and cover unused keyholes. The model uses small retention tabs on the cylinder body for a secure fit without glue. Prints quickly and requires no supports. Feel free to scale or modify to match your…
My brother needed a custom plate for a cheap shower faucet that needed a thick spacer
Pipe Collar 10-40 mm (escutcheon ring)
Really simple model to be inserted onto the spindle.
This is a protective cover to protect a 20mm radiator pipe. Taking up approximately a 45mm volumetric space. Prevent damage from sources such as handheld vacuum cleaners, as well as robot vacuum cleaners that will potentially bump into…
I used this for my shower rain head to cover a large gap. see pics below.
A customer had a dashboard panel that was in poor shape so he took it off and sent it to me. I duplicated it and printed him a few to fix the problem. This is the dashboard panel or the master power switch on a Nitro bass boat. In the…
This is a simple cover plate (escutcheon) for a eurocylinder gate lock with a small handle to close it when locking. The FreeCAD design is included for modifications - or just mirror it in your slicer.
really basic and primitive model made in tinkercad
Escutcheon plate for service fuses, fits pretty much every brand, have yet to find one that doesn't fit. Have printed out of petg and pctg, needs to be flexible enough to bend into the fuse.
Idea I always disliked the looks of the two semi fitting pipe collars around the pipes of my radiators. During my last home improvement project, I decided to make the covers more attractive. They consist of three parts: The frontplate,…
A customer had a dashboard panel that was in poor shape so he took it off and sent it to me. I duplicated it and printed him a few to fix the problem. This is the dashboard panel or the master power switch on a Nitro bass boat. In the…
This escutcheon has two purposes. First, it is designed to make a plumbing cleanout wall access cap a little better looking; and second, it provides a wider diameter cover to hide possible wall damage or sloppy workmanship at the hole in…
![4" [100mm] Laundry Faucet Cover Plate Escutcheon](https://media.printables.com/media/prints/1077299/images/8149424_c19c404b-e3c9-4a1d-aeee-fbd7519b0729_91c2067e-1f22-4b94-ba47-fb8203e70393/a11d3163-d89c-4141-8f93-fa0b13fe7936_1_201_a.jpeg)
