Counting matching models…
This uses 2 7-8mm M4 SHCS bolts, slightly shorter than the ones included in the Exoslide Ender 3 Y carriage kit. With this, you can get rid of the microswitch and use sensorless homing on the Y carriage. It looks cleaner than just leaving…
Wanted to play around with Core-XY but didn't want to commit to linear rails and EVA because I'm a cheapskate and my printer already had Exoslides. Biggest change was moving a couple of the 3mm bolts over to line up with the Exoslides and…
These are supposed to be in mm, not cm. Scale to 10% if needed. 09/APR/2022: Thickened and remixed BLTouch mount so the wires are on the inside, added screw holes for the 4020 fan This is an amalgamation, fix, and re-modeling of: The…
I wanted to reduce the weight on my Hero Me Gen 7 setup, so I moved the chain bracket to the top of the Exoslide. Uses the M4 screw holes already in the Exoslide and fits in the middle of the belt bracket. I'm still using the frame…
This is a simple remix of the Exoslide Hemera blower mount. All I've done here is remove the chamfers on the front face to reduce overhangs so close to the heatbed, and then added some internal chamfers in the air duct so provide more…
Made this to adapt a delta carriage made to mount on linear rail hole pattern. M4 counter sunk holes for Exoslide and 20x20 hole pattern to mount attachments. Category: 3D Printer Parts
Created to hook up some cable chains for my Ender 3 Pro that has all of the ExoSlide kits on it.
Goes along with the hot end carriage mount. Basic design to allow for use with an Ender 3 pro that has the XZ ExoSlide kit and mount the cable chain at an OE bowden extruder location. Printed and in use.
Edit 4.28.2020: I updated the part cooling fan duct, this moves the duct further away from the hotend, so it doesn't melt, gets it out of the way fo the wires, and also seems to improve the flow. If I say so myself, it also looks a heck…
Modelled and printed this Exoslide Wire guide for my Ender 5 + with a Hemera Hotend kit. The Exoslide is great upgrade for any 3D printer, but without proper wire management, the lose cables catch on the belt and can times cause the…
Re-design for the stealthburner to fit direct on de exoslide. bltouch offset: x_offset: -39 y_offset: -3 print it in voron spec if you like my work https://paypal.me/sanderelsinga at your own risk not to recover damage from me!
Air Duct made for Exoslide Extruder with Revo Hotend and 4020 Fan https://www.exoslide.com/products/hardware/extruder-exoslide
https://www.exoslide.com/products/hardware/bracket-motor-ExoCube
This was used on an Ender 5 Plus with full exoslide kit. This will let you keep as much X bed space as possible with a side mounted fan.
Why? The Exoslide kit for the Ender 5 Plus is a nice upgrade from the stock v-slot wheels if you can't afford linear rails. However - the mounting brackets and design, while being better than stock, still leave something to be desired…
Added wire guide / relief Print Settings Printer Brand: Creality Printer: CR-10S Resolution: 0.2 Infill: 30% Filament: Inland ABS Black Notes: I suggest a brim to support the zip tie channels Category: 3D Printer Extruders
This design allows dual 5020 blower fans to be mounted on either side of the Hemera mounting points while mounting below the x-axis Exoslide system. The top mount features 2xm4 mounting holes, 20mm between centres to match the mounting…
Exoslide hotend mount designed for the ender 5 and 5+ Print setting: 4 layer walls 4 layer bottum+top 15% infill Bltouch offset: x : -30 y : -3 Heat inserts : M3…
BL-Touch/CR-Touch mounting brackets for the Micro Swiss NG Extruder and NG Revo Extruder installed on an ExoSlide motion
![M2723 ExoSlide [Micro Swiss NG Extruder] - Probe Brackets](https://media.printables.com/media/prints/707266/images/5548494_f4f0cf07-4171-4b77-b3d2-a0da6692225e_b5861331-8556-44ab-9deb-b9b54d37ec8c/image1.jpg)