Counting matching models…
Projectvideo: https://youtu.be/SNWnS3XnjX8 I have been experimenting with a breakaway wingtip to improve on the silhouette of my design to match the real F14 better, while still being print-in-place and articulated. The wingtip breaks of…
This is a modified version of my Surprise Egg #6 - Tiny Jet Fighter, but bigger, smoother and with a stand https://www.prusaprinters.org/prints/10652-surprise-egg-6-tiny-jet-fighter Commercial license Do you want to sell prints of this…
Famous Planes Famous Planes is a set of airplanes in kit cards you have to build. Those are perfect gifts ! You can find the whole collection here 😊 ! F14 Tomcat This is another plane for your collection : the F14 Tomcat. This kit is…
A credit card sized kit card of the venerable F14 Tomcat I made for a friend. Everything should fit neatly. I tested on a Mini.
IDEX/Multimaterial version. Single extruder version: https://www.prusaprinters.org/prints/77500-print-in-place-and-articulated-f14-jet-fighter-wit Stand:…
F-14 Tomcat Kit Card Model Firstly - Thank you to "Kirizaya_43" who created this model, and shared on Thingiverse. I have done a few tweaks to the model as follows, but the design was all theirs: 1) Initial intent was to only put all…
The Grumman F-14 Tomcat is an American carrier-capable supersonic, twin-engine, two-seat, twin-tail, all-weather-capable variable-sweep wing fighter aircraft. The Tomcat was developed for the United States Navy's Naval Fighter…
Please leave a “Make” or comment / review and like this if you print it… a small ask for my efforts surely :) Adjustable Jig for creating circular cuts with a router - perfect for round holes or round objects and arcs. Designed for the…
Update 03.09.2023: Improved "click and clean" ergonomics. Printer brand: Flying Bear Printer: Ghost6 Rafts: No Supports: Yes (only "base" detail) Resolution: 0.2 Infill: 100% Filament brand: Esun Filament color: red, light blue Filament…
Imprimer les pièce puis les assembler comme sur les photos (il faut un peut forcer sur les dérive pour les faire rentrer). Mettez un j'aime pour m'aider ! (enfin, si vous aimer ;) )
Base with Danger Zone TopGun logo and 2 darts holders either side of a mount for a separate F14 model. No supports. F14 model printed separately from this brilliant model..…
I created this base plate for a Bosch POF 1400 router. It can be routed into a cabinet to make a DIY router table. There are some insert plates too for different router bits diameters. The insert plates are held to the base plate by…
Imprimer les pièce puis les assembler comme sur les photos (il faut un peut forcer sur les dérive pour les faire rentrer). Mettez un j'aime pour m'aider ! (enfin si vous aimer ;) )
This 3D print is the emblem of the VFA103 Squadron of the US Air Force. 17x17cm | 6.70x6.70in Wikipedia link There are 3 files. One for each color. The pieces interlock with each other. There is not too much need to force the banners with…
Part 2 SLT had some faulty geometry –normals and not touching edges- fix it manually and re-uploaded.
It's fine. You're fine. You totally dodged that mechanic. Blame the ping. Anyway… Can scale this to use this as a magnet, coaster, cosplay, tabletop game chip, or just give to that guy in your static who earns them the most often. If you…
its a model plane art to stick to walls
This is a support foot designed for the Festool OF1400 router, which helps prevent the router from tipping over during use. To attach the support foot to the router, you will need an M6x20 star knob. For added protection, consider using a…
This is a copy ring for Festool OF 1400 router. Thanks to ChowS on Makerworld for making the initial model. I remixed it so that you can print your own inserts. The accuracy and robustness of a 3D printed model will not be sufficient for…
[Manually copied from my Thingiverse account since import didn't work for some reason …] When building my router table, I had to modify the dust collection connector on the fixed router base of my AEG MF1400KE router (identical to Rigid…
UPDATE: This design has a bit of an issue ... the dust collector has to draw in air from around the router bit, but also has to transport away the router motor cooling air, which is blown out at the bottom. So my dust collector was not…
**FIXED Shoei NXR2/RF-1400 GoPro Chin Mount by Masway1400 on Thingiverse: https://www.thingiverse.com/thing:6272613 Summary: Fixed the gap between the rails and the body of the mount so that it prints like a continuous body.When slicing…
I purchased a RolandF140R and needed a place to put my sheet music books when not in use. They were all over the floor until I realized I had a 3d printer and a dream. Please enjoy!
Project: f14.hfp Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm The Model is 200x125.13mm in size You may print at higher layer heights below the Min Depth of 0.48mm The Max Depth is 2.2mm and the Actual…
I made it for this modell: Print-in-place and articulated F14 Jet Fighter with Improved Wingdesign von agepbiz | Kostenloses STL-Modell herunterladen | Printables.com
This model needs support and to print you should flip it upside down for the best turnout and the least filament used.
3 éléments permettant d'adapter le répartiteur 3-en-1 avec trappes de Holzprofi sur l'aspirateur Felder AF14. Holzprofi AB-YM150 120/100/120 Felder AF14 DE140 en entrée 1x Adaptateur_DI145_DE140 2x Adaptateur_DE120_DI120 1x…
It is a keychain that says F-14 on it. It does not come with a chain.
I made this to hold my hair in my helmet. It secures in between the pads and the helmet and then you can tuck your hair into the cloth section. You need a stretchy cloth, and an elastic band. 3D print the clip Heat it with a hair dryer…
prowadnica do szyny zagłębiarki Mafell/Bosch FSN do Frezarki Festool of1400. Należy do wydruku zastosować dwie nakrętki 6mm i dwie śruby 6 mm w celu unieruchomienia prętów prowadnicy.
Buffer tube adapters for RIA All-Generations pattern receivers. High grip allows you to get a higher grip so the trigger pull is normal, but it can be awkward depending on your hands. The low grip makes the trigger have a heavier pull but…
A detailed modular 1:72 display model of ISRO's GSLV Mk II F14. This model belongs to a six-vehicle ISRO collection; every rocket uses the same scale so they can be displayed together accurately. MODEL DETAILS - Finished height: 718.5 mm…
I have never tested at high G force. The bottom of the adapter doesn’t seem to perfectly fit into the rotor, be careful of the risk of damaging the rotor when used at high force! Feel free to remodel and make it better fit to the rotor,…
Rear light (reflector) for the Yanmar F145D Japanese tractor. Print with no supports
LED ring that fits under a Sony lens instead of the original lens hood Compatible with 10mm LED strips
Buffer tube adapters for RIA All-Generations pattern receivers. High grip allows you to get a higher grip so the trigger pull is normal, but it can be awkward depending on your hands. The low grip makes the trigger have a heavier pull but…
This is a copy ring for Festool OF 1400 router. Thanks to ChowS on Makerworld for making the initial model. I remixed it so that you can print your own inserts. The accuracy and robustness of a 3D printed model will not be sufficient for…
LED ring that fits under a Sony lens instead of the original lens hood Compatible with 10mm LED strips
The Grumman F-14 Tomcat is an American carrier-capable supersonic, twin-engine, two-seat, twin-tail, all-weather-capable variable-sweep wing fighter aircraft. The Tomcat was developed for the United States Navy's Naval Fighter…
This is a mounting platform and sign bracket for the F14Tomcat kit card by Toto_28 available at https://www.prusaprinters.org/prints/99130 These parts are designed to attach to a 3UDC pivot arm so that you can present this model anyplace…
Larger case for the Pro Tool Kit Uses a m2.5x25 for the latch, no paper clip needed
An adapter that enables the Bosch POF1400ACE to be used on/with the FSN rails. It uses an amended version of HAMMER_T's baseplate which was adapted to be screwed onto the rail guide. The rail guide is unchanged Rail_Adapter.stl from…
