14 models
The new Ver 2 can be found here: Intro This is a DIY-project for building a replacement headlight for the European (2021-2024) version of the CRF300L. I suppose the US version will also fit because the headlight looks the same. It is not…
Intro This is a DIY-project for building a replacement headlight for the European (2021-2024) version of the CRF300L. I suppose the US version will also fit because the headlight looks the same. It is not compatible with the new EU…
This is a collection of various navigation mounts which fit on my: Questions? You can post them on reddit or advrider.com If you want, you can buy me a coffee . Chigee AIO-5 Play Requires 3D-printed parts: CRF300L – HeadLite – Navigation…
If you have a few RF300 motors lying around (they are usually found in cheap toys and most commonly in DVD drives), than you can use them for good! The 5015 blows as good as original 12v or 24v but uses only 5v (you can overvolt it to 9v…
If the brake line on your CRF300L gets in the way and you can't see the whole LCD, you can print this 12mm spacer, which will move brake line further away from you. 12mm spacer is maximum you can use, otherwise your brake line will be…
Attach your Oxford heated grips controller next to your dashboard using a simple cable tie. 2 Versions: CRF300L - Oxford Heated Grips Mount (original) Ver 1.0 Compatible with the EUR (2021-2024) model CRF300L - Oxford Heated Grips Mount…
The project files for my custom GPU Shroud for use as reference. printable as one solid piece (needs 290mm+ printbed) or vertically as two parts. The file includes both variants. right click and split off whichever variant you want to…
I printed it on a resin printer but it should be possible to print this on a FDM printer.
Die Tyreboy-Basis für den Lenker kann mit Kabelbindern fixiert werden. Anschließend wird der Tyreboy mittels Klettband befestigt. V2 use Support and Supportblocker for the Cable ties. The Tyreboy base for the handlebar can be secured with…
With this mount in combination with the Schuberth flashlight mount and a M8 x 25 grub screw you can use the mounting points on the Schuberth F300 firefighting helmet to mount your Gopro.
For Honda CRF300L. Combination of navi/phone mount along with fairing (with mounts). Bottom mounts mountd on 3M VHB tape. Just a prototype, but worked for 260km of highway and 1000km of offroad (TET in Poland) with iPhone 11 on quadlock.…
Fixed cables are a PITA, so I wanted to make the USB cable on my fightstick detachable. I used a dremel to widen the existing notch that was used for the original USB cable. My wishlist of improvements for this are as follows A top cover…
The Logan F300-2 Pro Joiner I purchased in 2005 has developed rust in several places, and its rubber pressure foot had deteriorated and crumbled into powder. As a first step, I 3D-printed a replacement pressure foot using eSUN TPU-83A…
The project files for my custom GPU Shroud for use as reference. printable as one solid piece (needs 290mm+ printbed) or vertically as two parts. The file includes both variants. right click and split off whichever variant you want to…
