Counting matching models…
The Škoda Fabia RS Rally2 is a Rally2 car and therefore complies with all FIA (Federation Internationale de l'Automobile - International Automobile Federation) regulations for this group. It is a rally special powered by a 1.6-litre…
Škoda Fabia The Škoda Fabia combines practicality and modern design in a compact package. Perfect for fans of dynamic driving and clean lines, this car is now available for printing as a detailed 3D model. With its sleek exterior,…
Holders for SKODA Fabia Console Phone Holder by giuliopierucci. Can holder is remix from Skoda Fabia 1 cup (can) holder by Bednys. I recommende use of some thermal resistant filament like HIPS, PETG (no PLA).
Skoda Fabia 1 (1999 - 2007) phone holder on dashboard Diameter of the ball is 17mm I used the Baseus Car Phone Holder from Aliexpress as the holder itself https://s.click.aliexpress.com/e/_DBAMS11 It is necessary to print the model split…
Rear wiper cap for Skoda Fabia 1st generation. Print Settings Printer Brand: Anycubic Printer: All-metal Mega Rafts: Doesn't Matter Supports: Yes Resolution: 0.2 Infill: 40% Filament: SynTech PETG Black Notes: Printed upside down…
Stačí našroubovat do vzniklého otvoru. Just screw it into the hole.
wait a moment, I will also make a version compatible with the original magsafe charger a joint with matrices needs to be printed in one, so you need to set pause at height when printing the joint and add 2 matrices (unoriginal magsafe,…
The readymade .stl is made for a Skoda Fabia 3 (and probably fits other cars for the Volkswagen Group), but you can modify the dimensions in Fusion 360. Since I think most people use a case on their phone, it's designed with this in mind.…
This is a rather nice looking (and feeling) keychain, I modeled it after the Skoda Fabia R5 rally and created it to be dual color. What will you need to print this? - 2 colors of filament of choice (obviously it's also possible to print…
EN: The bracket uses unused space instead of the plug to the right of the climate/heating control. Joint with a thread on which to subsequently place the bracket itself I recommend to split and print in two parts (as in the picture) and…
My friend broke a cup holder in his Škoda Fabia (1st gen) so I made him a replacement. Improved. :o) I printed this from CFJet (PETG with carbon), however regular PETG or even ABS also work. Few small supports are necessary (but only from…
Keychains of Skoda Auto cars included Skoda Octavia, Skoda Superb, Skoda Fabia, Skoda Felicia
Skoda fabia 1 combi working wheels everything pla print time: 6h supports required
Turn the center console into a more practical and organised storage space in your Škoda Fabia. This 3D-printable cup holder insert combines a dedicated drink holder with additional compartments for small everyday items such as keys,…
Vyrež poškodenú časť úchytu lamiel a prilep vyrobenú časť sekundovým lepidlom. Vyrobené ASA filamentom. Odolné pred UV žiarením a vyššou teplotou. 100% výplň.
[Update V2] I updated the model including a top Cover (which you have to glue on) to get a even cleaner look. Also i found out you can disasseble the wireless charging pad and remove the silicone top by unscrewing 4 screws from the bottom…
A coluna de som do meu carro avariou tive de fazer um adaptador Espero que gostem Se imprimir este objeto, por favor partilhe a sua impressão 3D ----- English version ( translate google )--- The speaker of my car broke down I had to make…
shopping cart token with Škoda Fabia motifs / žeton do nákupního košíku s motivy škoda Fabia
Phone holder for your Skoda Fabia Mk3, this provide a slot for your phone to go whilst it is plugged in which solves the problem that your phone with the cable plugged in does not fit anywhere else. Suggest printing in at least PETG as…
Fabia II interior lid, you can customize it, I used it for a phone holder. model of car holder here: https://www.printables.com/cs/model/479566-holder-for-fabia-2-with-magsafe-support part number in the skoda catalog: 5J1 858 178 B 9B9…
PETG Layer 0.2 Fill 100%
The original part is very fragile and breaks easily. This is an improved version. I suggest to print it from PETG.
Skoda Fabia Keychain The model includes two versions for easier attachment to keys: 3 mm keyring hole – recommended if you use a split ring keychain 6 mm keyring hole – for directly sliding keys through the hole (no split ring needed)…
EN: I created button of center console for Skoda Fabia 1 . I wanted to created original phone holder, so I use parts from non-functional old phone holder, did some changes in my button model, print it, and so far it works! Left , middle…
Use the 3mf file for color change or use the stl file and use the picture of the slicer as a guide.
A bracket that fits around a 1DIN aftermarket stereo in a Skoda Fabia (Mark 1) to make it look better. Blends perfectly into the shape of the dashboard.
Soporte bandeja trasera Skoda Fabia año 2010, este soporte es el que hace de bisagra para la misma bandeja. Esta hecho en PLA y en principio aguanta bastante bien. El soporte que trae el vehículo consta de dos piezas que unidas entre si…
This is a little trashbin for our Skoda Fabia (2025 model). Im pretty shure it fits to other Skodas aswell as maybe some VWs. Best to print in PETG due to high temperature in cars during sommer months. Print both parts upside down and…
Scroll down for the english translation… “ FABIAN ” als druckbare LED- Namenslampe. Druckeinstellungen: Infill 8%, no Supports, 0.2 mm (Möglichst die Z-Naht so verstecken, dass sie an den Klebepunkten ist.) PLA (nicht UV-beständig, besser…
I have printed mine horizontally so that the tabs dont break that easily. I used PETG and some glue just to be sure. I redrilled the holes with a 14mm drill.
Part is printed in PETG , but you can use a more durable material if you have one in stock. A printout with a 0.4mm nozzle and 0.2mm layer height. Take care of the right amount of walls and a minimum of 20% infill (I used gyroidal)
I had a very specific issue with the “door carpets” of my fabia 1. It had holes for manual window control, but i have electric, so i made these covers. Doporučuji tisk na ploché straně s přilehlými podpěrami a nízkou výšku vrstev. I…
V kolečku je nutné vyříznout 3x závit M3 (popř. závitová vložka Helicoil M3 - nebylo nutné). Spojovací materiál: 3x šroub stavěcí s vtniřním šestihranem a s hrotem M3x8, ISO 4027 (DIN 914) Tisknul jsem na PRUSA XL: Filament: Prusament…
Držák clonítka škoda fabia MK1. Doporučuji tisknout z ASA
I lost the logo on my car wheel, so I designed a similar one. I used two colors. I printed in Prusa MINI used 0.25 nozzle. I used the 55 mm version. The filament replacement is included in the gcode.
Skoda Fabia MK2 coin an buble gum holder
Material: Petg grau Düse: 0.4mm Layer height: 0.15mm Abziehwerkzeug: Ohne Supports Kappe: Mit Supports (paint-on) für den äusseren Rand und evtl. Variable Layer Height für den oberen Radkappenbereich.
Skoda Fabia MK2 coin an buble gum holder.
it likes to break while disassembling ;)
Díl je torzně celkem namáhán, tak je složen jen z perimetrů. Tisk na PETG.
Simple protective back door sill cover for Fabia 4 It may fit older Fabia generations or other Skoda cars. Dimensions: 195 mm lenght 40 mm widht 3 mm thick To print 2 at the same time on Prusa MINI you have to rotate it around Z by 45°…
I don't know why or for what, I just wanted to. Не знаю, зачем и для чего, просто захотелось.
I lost the push button for one of the headrests in my skoda fabia. It doesnt work perfectly, but better than no push button.
Infill: Min. 10%! LED Strip: Weiß drucken! / print white! Was braucht man? USB Verlängerung (Zweigt bei mir von dem Dashcamnetzteil ab (Vantrue) https://www.amazon.de/dp/B06XHV51ZB?psc=1&ref=ppx_yo2ov_dt_b_product_details 12V Verlängerung…
Vytisknout z PC Blend, nebo PetG
A simple holder for the YETI Rambler 14oz version. Fits in the middle of the cup holder of the Skoda Fabia Mk2 (2007-2014). Print instructions: Lay flat upside down (big side down) Has to be printed with supports Settings: 0.15mm PETG…
Fix for Škoda Rear Trunk Cover Noise On many new Škoda models, the rear trunk cover makes rattling noises when driving over bumps. This is caused by excessive tolerance on the two tenons. An official Škoda dealership "fixed" it by…
made a mount for the magsafe charger which fits in the beverage holder in the skoda fabia. Mounting only works for phone in landscape mode
Škoda Fabia IV Keychain This keychain is inspired by the Škoda Fabia IV , a modern and stylish compact car for everyday driving! For the best results, print with a 0.2 mm nozzle for finer detail. A perfect accessory for Škoda enthusiasts…
Keine Haftung Benutzung auf eiegene Gefahr ! Disclaimer Use at your own risk! ZUVIEL DRUCK KANN DIE BREMSANLAGE SCHÄDIGEN ! TOO MUCH PRESSURE MAY DAMAGE THE BRAKING SYSTEM! Teilenummer des Original Deckels " 6N1611349B " ( Skoda Fabia 5J…
Ich habe in meinem Skoda Fabia II lange etwas vermisst und es hat mich etwas gestört. Leider war ich erst jetzt mit dem 3d Drucker und etwas 3d Modellierungs Kenntnissen in der Lage das Problem anzugehen: Es fehlt eine Smartphoneablage.…
Der "sicherungspin" (Olivgrün) wird eiegentlich nicht benötigt, hält auch so ohne probleme. Verbaut sind die Clips neben dem Fabia (2000-2015) auch im Octavia (2009-2013) und Roomster (2006-2015)
## Design Concept This piece is a component designed for the Skoda Fabia MK1 (6Y) instrument cluster housing. The model is structured to integrate seamlessly with the dash layout of the vehicle, emphasizing precision in fit and function.…
I made this model to fix my broken Skoda Fabia mk2 Sliding trunk cover. This locks the cover in open position.
cover for front towing eye for skoda fabia mk1 (may fit more models, since vw shares parts like this acros multiple models and generations) aditional hw: 2x DIN 912 - Hexagon socket Head Cap Screw - M3x40 (or more) 2x DIN 982 - Prevailing…
Čep víka kufru Octavia a Fabia
Z PETG držák 77/12mm
Zarážka bovdenu ruční brzdy Škoda Fabia 1
A super simple design to help you clean up your desk! It helps you declutter your desk by organising your pens into one place. I had modelled it perfectly to fit under my monitor on my stand as that was some wasted space which I could…
Lower grille trim for a pre-facelift Fabia 2. I recommend using PETG or ABS plastic.
Fabiano Luigi Caruana is an Italian and American chess grandmaster who is the reigning four-time United States Chess Champion. With a peak rating of 2844, Caruana is the third-highest-rated player in history. Born in Miami to Italian…
Customized version of http://www.thingiverse.com/thing:1672381 Created with Customizer! http://www.thingiverse.com/apps/customizer/run?thing_id=1672381 Category: Other
Skoda Fabia Mk1 (6Y) Rear Wiper Arm Conversion Mod Upgrade your annoying stock rear wiper setup to use high-quality, easily accessible aftermarket wiper blades such as the Bosch Rear H351 (3397004629) or any standard rear blade with a…
Grundplatte für Skoda Fabia kann natürlich auch für andere Modelle passen. die grundplatte ist für den linken Außenspiegel gedacht. Sollte denke ich auf für die rechte Seite passen
Ich habe in meinem Skoda Fabia II lange etwas vermisst und es hat mich etwas gestört. Leider war ich erst jetzt mit dem 3d Drucker und etwas 3d Modellierungs Kenntnissen in der Lage das Problem anzugehen: Es fehlt eine Smartphoneablage.…
Škoda Fabia IV Keychain This keychain is inspired by the Škoda Fabia IV , a modern and stylish compact car for everyday driving! For the best results, print with a 0.2 mm nozzle for finer detail. A perfect accessory for Škoda enthusiasts…
cover for front towing eye for skoda fabia mk1 (may fit more models, since vw shares parts like this acros multiple models and generations) aditional hw: 2x DIN 912 - Hexagon socket Head Cap Screw - M3x40 (or more) 2x DIN 982 - Prevailing…
Skoda Fabia Keychain The model includes two versions for easier attachment to keys: 3 mm keyring hole – recommended if you use a split ring keychain 6 mm keyring hole – for directly sliding keys through the hole (no split ring needed)…
EN: I created button of center console for Skoda Fabia 1 . I wanted to created original phone holder, so I use parts from non-functional old phone holder, did some changes in my button model, print it, and so far it works! Left , middle…
Der "sicherungspin" (Olivgrün) wird eiegentlich nicht benötigt, hält auch so ohne probleme. Verbaut sind die Clips neben dem Fabia (2000-2015) auch im Octavia (2009-2013) und Roomster (2006-2015)
I have printed mine horizontally so that the tabs dont break that easily. I used PETG and some glue just to be sure. I redrilled the holes with a 14mm drill.
This is printable logo of Skoda. If You want make it with bi color it is yours choose
no další pro nadšence, tištěno PET-G černá/stříbrná 0,12mm model na fotce 80mm, stl soubor je větší, upravit lze ve sliceru
Držák pro spínač pro Škoda Fabia MK1 místo původní záslepky, např. pro spínač LED rampy atd
Skoda Fabia 2005 Motorhaubenentriegelung Print Settings Printer Brand: ELEGOO Printer: ELEGOO NEPTUNE 4 Pro **Rafts:** No Supports: Yes **Resolution:** 0.2 Infill: 30 Category: Other
The best results in terms of durability are achieved with Prusament PETG. The drawer was also designed for Bluetooth speaker (fits perfectly).
Holders for SKODA Fabia Console Phone Holder by giuliopierucci and later by Jan Tomášek. I made just the phone holder bigger. Compatible with original part.
This takes up the spot that is normally filled by the little frame around the radio. Behind that frame, you will find two screws. This design screws into those two holes. You will need to replace the screws with some slightly longer ones.…
I have modified empty console button (https://www.thingiverse.com/thing:3033648), to work with gravity phone stand(https://www.thingiverse.com/thing:5540487). Go on the original links and give them like and download because they did the…
Phone holder with built in hole for standard charging cable. Made to fit an iPhone 6 in a Skoda Fabia. A separate ring should be printed in TPU. It allows the phone holder to fit snuggly into the cup holders without scratching the interior.
The holder is designed for google pixel 8a with spigen rugged case. Printed with PETG with 40% cubic infill on my ender 3. Parts are joined together with M5 bolt and nut. The vent insert part is installed in the original vent duct after…
Created for the custom of his car, maybe someone will need it. Printed with 100% fill. It is better to print from PETG. Создавал для кастома своей машины может кому-то пригодится. Печатал с заполнением 100%. Лучше печатать из PETG.
A new stove lid with the inscription " BAKA! ". I also created a custom car for myself, printed it from PETG with a 10% fill, which is sufficient. I would appreciate any suggestions you may have! Новая крышка печки с надписью " BAKA! ".…
Ten to model jsem upravil pro nabíječku z alzy. Použil jsem nabíječku z Alzy: https://www.alza.cz/alzapower-q110b-wireless-qi2-charger-15w-cerna-d12392904.htm Doporučuji vytisknout z ASA a matice z PetG. Výška vrstvy: 0.15 nebo 0,2 mm…
![Cupholder Phonestand [parametric, Skoda Fabia 3]](https://media.printables.com/media/prints/746534/images/5831109_8b5f4ca7-795f-41fb-bb6a-34c044498377_950b57a2-b0ba-4a87-9f7a-c5ccb1fcd9cb/20240201_142722_1706794125338.jpg)
