Counting matching models…
Just Printing the Covid19 Faceshield due to a total lack of any protection gear here in germany and probably the rest of the world as well. But since i do not have a fitting rubber band and all the stores are closed now i designed one…
i dont found anywere a faceshield that can fit on kosel mini heatbed now i optimized it you can print only thing you need to configure on your slicer number of brim lines change to 6 and you can print this faceshield Category: Other
This is the #3DVFaceShield PPE from Sweden, I used it as a template and modeled stacks of 20 that can be printed all at once. On a 300x300 bed you can get 3 stacks so you can print 60 at a time on a 220x220 you can get 2 stacks so 40. Ok…
2020-03-28: some of you wanted access to the source file. I've uploaded over at thingiverse since this site wont let me upload the .iges file. https://www.thingiverse.com/thing:4229703 2020-03-27: delivered the first batch of 100 shields…
This is a derivative of the Prusa face shield , and is a variant of their Release Candidate 1 ('RC1'), adapted to use an A4 punched pocket , which you might find at your local supermarket, and it is very possible that you have hundreds…
This is a modification of the clear faceshield to have the shield "wrap over" the head of the wearer, to help protect them from contamination from the top. This is only an svg of the clear face-shield, use the standard 3D printed frame…
This is a slightly altered version of the FaceShield RC1 - A4 punched pocket , which has been altered to be roughly 60% in height and therefore print much faster. It is an indirect derivative of the Prusa face shield , and is a variant of…
I have added the material name on the side so that users (medical staff) know what material they're dealing with and how to sterilize the parts best. PETG, ABS, ASA & PLA should do for most of the people.
this is a remix with multiple options for the strap (we have shortages here on elastic), this version supports: the original RC2 buttonhole elastic, elastic straps, headbands, swim goggle straps, tourniquets, exercise band strips, bungee…
A little helper to cut a DIN A4 PET for the Prusa Face Shield RC3
Our own development is based on a remix of the original Prusa mask, which is a bit narrower and has an optimized hexagonal cutout. Our own adjustments / improvements are: Stackable version without support material fits on Prusa Mini print…
Since we are running out of facemasks in Germany and probably the rest of the world, i am just printing These Faceshields. Great design but since rubber straps are hard to find with all the Shops closed i designed one to print in tpu or…
durable easy to print sealed top faceshield with mask strap for earloop surgical masks dxf file included for cutting acetate holes... i use a silhouette cameo Print instructions i use pla for this, 0.4mm nozzle with a line width of 0.6,…
I designed a Rubber Band Clip for the RC3 Faceshields since we produce them in our makerspace and thought these would be more compatible with different rubber bands. Edit (07.04.20) : We found out, the 20mm V2 clip is basically crap.…
Currently a lot of makers are printing faceshields as "Makers vs Virus". To cut the rounded edges easier, I have created a small helping tool. The tool can be adjusted via OpenSCAD. The 80mm diameter variant is attached. 80mm diameter…
Here in the UK 0.5mm PETG is becoming difficult to get, but 1mm PETG is still readily available. So here is a remix of the Prusa Bottom Reinforcement which is more suitable for 1mm PETG. Print instructions Same as Prusa Faceshield RC1,…
Made a version that is easy to stack and do not have any sticking out. instead I made holes and some clip that also could be printed. I started with the Prusa model, but finally I made a new one instead. The rubber band could be adjusted…
Big thanks goes to Josef Průša and the PRUSA company for this design! Attension: Read the instructions before bring it in circulation there are some important things you have to notice. Use the following link to get those:…
A headband made from 3 pieces. Two identical flex pieces to make the band and a size adjustor. Is reasonably comfortable. Could serve as a replacement for when elastic bands are out of stock. Could also be disinfected better. However the…
A group member has 181540 and 181560 face shields from MCR Shield, but no band to attach them to for Covid-19 donations to the NHS. This variant of the very nice DtMv3 design extends the shield mount and provides a pin layout that might…
UPDATE New version 2.2 (more bleow) This print uses Voodoo magic and a 1mm nozzle to enhance print speed while still producing a good quality finish. This print uses Voodoo magic to enhance print speed while still producing a good quality…
I designed fast printable & easy maintainable faceshield. After print all u need A4 size transparent film and a piece of elastic band. Cut the film 260 mm x 210 mm and slide into gap at the front and tie the elastic band to back side of…
Jednoduchý obličejový štít. Po vytisknutí roztáhnout, vložit A4 fólii pro kroužkovou vazbu, nasadit gumičku. Žádné řezání ani děrování fólie. Navíc se dá fólie kdykoli lehce výškově posunout. Simple face shield. After printing, stretch,…
UPDATE There is a new version: https://www.prusaprinters.org/prints/29052-1mm-voodoo-faceshield-v34 This print uses Voodoo magic and a 1mm nozzle to enhance print speed while still producing a good quality finish. ATTENTION!!! These files…
ONLY FOR 3D VERKSTAN FACE SHIELD ISO 838 2-HOLES PUNCHES MODEL Increases the screen rigidity and maintains its curvature. Add punches (with same pattern) on the lower part of the PVC sheet as the same as the top Install as shown on…
Based on the design by made by HanochH ( https://www.thingiverse.com/thing:4233193 ) A ready to run stack of 4 faceshields. You can snap in an A4 or 8.5 x 11 transparent sheet and lock it in to place! No hole punch required!
Prusa faceshied in the speedprint format modified for a standard four hole A4 hole punch. (888 - 80mm between all holes - not the 80-60-80 of the prusa). Added stacks for a 0.3mm layer height in 2 (to test) and 15. ie only print with a…
Designed and tested by volunteers from SOMD Loves You. A local non-profit organization formed in Southern Maryland, USA. For most up to date version of this design, as well as a full technical data package for other related files and…
Update June 21: The Faceshield turns out to be also sliceble with current versions of Cura when setting Z Seam Alignment to “User Specified”. Settings down below.…
We print this one for our donation project in Indonesia, this is a remix version of brazil version with some modification 1.) Use the bigger hook and longer frame handle for hook 2.) We put 2 more punch hole to attach the transparent…
Stackable Faceshield with integrated cap . Print instructions This is a stack-able design of the EU face shield with an integrated cap. A test with a print of two stacks of 4 pieces with a layer height of 0.3 mm and a speed setting of…
For use with the rubber strap with hexagons, this enables those with larger heads to adjust length by cutting the strap in two and then adjusting to fit similar to a baseball cap. Related print:…
There are some issues with different types of plastic used, mainly PETG which, with the different brands and colors produce different rigidity of the shields. Also in use there are different thickness of transparent sheets used, so for…
This is a remix of the Prusa face mask, designed to be faster to print with voids to further reduce material consumption, so you can make more before you run out of filament! The following changes have been made to the RC3 which this…
Head band for A4 size shield with out Pin and hole. shield thickness recommended for 0.2mm to 0.6mm
The face shield mount pins are modified and optimized for HOLE PUNCH designed by Japanese industrial standard, JIS S 6041. Pin pitch: 80mm, Hole dia: 6mm
A printable face shield for the Corona outbreak, based on the Prusa initiative, you can get more info at https://github.com/FabLabUChile/fabuchile-face-shield This design doesn't involve modifying the commercial parts nor the printed…
Stacked remix of the FabLab U. de Chile FaceShield . 4 stacked faceshields with 0.2mm separation between each one. Gcode for Ender3 printers and STL files. Print instructions Optimized for 0.4mm nozzle.
With this Faceshield you can mount a Headlamp (Decathlon type with connection sphere 6mm model evanic) In order to have a good assembly without wasting so much print time the GCODE should have 2 different layers, first 0,3mm and on the…
4 different versions of our basic slight modifications of the excellent Prusa headband design, that we are using to print for the NHS in West Scotland. These are optimised for less material and faster printing in recognition of the…
This is a remix of the Prusa US version face shield. I extended the length of the frame to allow more room for magnifying loupes wear for dentists, I also closed the top part. Included with the design is the original chin piece and a…
Ther are a lot of GoPro Mounts that can be used, also for Flashlights or LED. https://www.prusaprinters.org/prints/11407-handle-bar-flashlight-gopro-bracket-318-mm Included with the design is the Prusa RC3 Faceshield for dentists. Print…
Some health professionals, such as dentists, use a magnifying glass in some procedures. This model is compatible with some magnifying models on the market. Print instructions Doens`t need supports. You can print with 0.6 ou 0.8 mm noozle…
LEGOCompatible Prusa Faceshield Adapter to Customize you're Faceschield. Customizable Text with scad. you can add also the Gopro Mount https://www.thingiverse.com/thing:3332968 Scad Text made with https://www.thingiverse.com/thing:16193…
Protective face shield headband derivated from Prusa RC3 Face Shield. This protective face shield headband is specially designed to be used with a A4 binding cover in landscape mode. This headband is 12 mm high and uses less than 30 g of…
Since many of you had problems with attaching the Shield to the face with rubber bands we proudly release our Remix for a Headband. It is tested by medical personal and has the big advantage of not giving you pressure points anymore,…
We got many messages asking for a stacked print for the 0.8mm nozzle. Because we had some problems with our model we redesigned the Prusa Faceshield Stacked and redone the print settings to make it work with 0.8mm nozzle. THE VERSION IS…
this is a mount for the prusa faceshield to put on your baseball capo
The new version has several modifications. We want to make the faceshield secure for clinical usage, adding a cover on top of it, and some minors modifications for comfort. Print instructions Optimized for 0.4 mm nozzle.
Lasercut Face shield / Facemask for fighting COVID-19 The main part needs to be cut from 3 or 4 mm acrylic.
This is my take on a chin faceshield. It is the fist version i tried and worked quiet well. To complete the shield you will need some elastic band and a sheet of laminating film without any paper in it. You can secure the film with some…
Concept of a Clip to add an "over the eyes" protection for the Panthera model of their Faceshield's headband
Just a Faceshield with a "Crown" added. Incase you have a small child refusing to wear a faceshield and because i have not seen something like this. Shieldframe by https://www.thingiverse.com/thing:4251224 Tiara by…
